Spedal CL796 Smart Multimedia Dashcam User Manual

Spedal CL796 Smart Multimedia Dashcam

To protect our earth, please use the e-version of this manual. If you encounter any problems while reading this manual or using the product, please feel free to contact us: support@spedaltech.com

DISCLAIMER AND SAFETY GUIDELINES

Disclaimer

This product is a smart multimedia dashcam. By using the built-in CarPlay and Android Auto functions, you will be able to connect your mobile phones with this device and manipulate your mobile phone Apps on this device . Please pay special attention to the cautions and warnings in this User Manual. You can visit our homepage http://www.spedal.cc to get relevant files of this product, including User Manual and other files. Shenzhen Xinzhuang Gude Technology Co. Ltd. (Spedal) reserves the right to update this User Manual.
The information in this document affects your safety, legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to follow the instructions and warnings in this document may result in product damage or other possible injury or loss. You must strictly follow Spedal’s guidelines to install and use the product, and never use non-standard parts. Before assembling, setting up and using, be sure to carefully read all the instructions and warnings in this document. This product is not a toy. Please do not allow children to touch this product or its parts and wires. Please be careful when operating in scenes where children are present.
By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the terms and conditions herein. The user promises to be responsible for his actions and all consequences arising therefrom. The user promises to use this product only for legitimate purposes, and agrees to all the terms and contents of this document and any related policies or guidelines that Spedal may formulate. You understand and agree that in the absence of videos or photos, Spedal may not be able to analyze the cause of your product damage or accident, and cannot provide you with after-sales service such as warranty.
Spedal is not responsible for all losses caused by the user’s failure to use the product in accordance with this User Manual.
In compliance with laws and regulations, Spedal reserves the right of final interpretation of this document and all related documents of this product. If the manual is updated, revised or terminated, we will not notify you personally. Please visit the official website of Spedal for the latest product information. Spedal is a trademark of Shenzhen Xinzhuang Goodo Technology Co. Ltd. and its affiliates. The product names, brands, etc. appearing in this article are all trademarks or registered trademarks of their respective companies.

Safety Guidelines

Warnings

• Please use the original cable and power cords only;
• Do not exceed the rated voltage when using the device;
• Do not install or operate the device with wet hands;
• Do not install the device in places of high temperature, humidity;
• Do not install the device in places of flammable or explosive gases or liquids;
• Do not install the device in an area interfering with the driver’s sight or driving safety;
• Do not install the device on the airbag cover or within the airbag’s working range;
• Do not leave the device in a closed vehicle under high temperature for a long time;
• Do not poke the device and its accessories using sharp objects such as awl or scissor;
• Do not disassemble, repair or modify the device and its accessories by yourself;
• Do not install, use or place the device within the reach of any children under 16;
• Do not cut the charging cable.
  

Notice: Damage caused to the dashcam as result of not obeying the warnings above is not covered by the warranty!

Cautions

• Do not press the lens forcefully to avoid lens breakage or lens misalignment;
• Do not directly touch the lens surface to avoid stains that affect the recording effect;
• Do not remove the memory card to avoid file damage during the shutdown process;
• When using the memory card for the first time, please format it on the device to ensure stable reading and writing;
• When not using the device for a long time, please pull out the memory card to ensure the memory card’s performance

ACCESSORIES AND INTERFACES

In the box

Before using this product, please check whether the product package contains all of the following items. If anything is missing, please contact Spedal or your local agent.

• Smart Multimedia Dashcam

• Suction Bracket

• Sticking Bracket

• Rear Camera

• Wire A (6.5m)

• Wire B or C (5m or 12.5m)

• In-Car Charger

• 32GB TF Card (Gift)

Product Diagram

Installation Guideline

The device is in the storage state when it leaves the factory. Please follow the steps below to prepare for installation:

1. Take the device and its accessories out of the box or plastic bag;
2. Tear off the protective film on the screen and lens of the device;
3. Remove the wire tie that binds the wire.

TF Card Installation
Insert the TF card into the slot with the pins facing downwards. Push the TF card forward, and the card can be removed after it pops out. Please use the 32GB TF card that comes with the product. A third-party TF card should meet these requirements: Class 8 or above, maximal 128GB.

Note: Installing and removing the TF card in the recording mode may result in failure of recording videos and causing damage to the TF card. Please turn off the device before inserting or removing the TF card.

Suction Bracket Installation

1. Aim the screw of the suction bracket into the screw hole on the device;
2. Rotate the suction bracket clockwise to tighten the screw;
3. Select a proper position (such as the center of the front windshield), attach the suction mound to the glass and press the lock piece to squeeze the air out of the suction cup;
4. Adjust the screen and lens angle. Suction Bracket Installation
   

Sticking Bracket Installation

1. Aim the clip of the sticking bracket at the mount buckle on the backside of the device;
2. Press the whole sticking bracket upwards to lock the clip and the buckle;
3. Tear off the protection film from the bottom of the sticking bracket;
4. Stick the sticking bracket on the dash board; 5. Adjust the screen and lens angle;

Dashcam Installation

1. Insert the plug of the In-Car Charger into the cigarette lighter socket of the car;
2. Insert the Mini-USB plug of the In-Car Charger into the USB slot of the device;
3. Fix the device on the dash board by using the sticking bracket. You might use the suction bracket to replace the sticking bracket and fix the device on the front windshield.
   

Back Camera Installation

1. Insert the plug of the back camera into the connection port of the connection cable (6.5m, Wire A);
2. Insert the plug of the connection cable(6.5m, Wire A) into the AV-IN hole of the dashcam;
3. Tear off the protection film from the sticker on the back camera;
4. Stick the back camera above he license plate and adjust the recording angle. Note: If Wire A is not long enough for your car(such as pickup or truck), you might use another extension cable(either Wire B or Wire C) in the package.

Interfaces Introduction

Main Interface
When you connect the device to the vehicle via the in-vehicle charging cable, the device powers on after the vehicle starts. If you want to connect the device to the power in any other way, press and hold the power button to turn it on. The screen after turning on the device is as follows.

Note: For more detailed introduction of the device functions and settings, please refer to 3. FUNCTIONS AND SETTINGS.

FUNCTIONS AND SETTINGS

General Settings

Click “Settings” on the main interface to enter “General Settings”.

Screen Saver Clock Settings Resolution Video Duration Protect Level

Click to return to the main interface. Scroll to see all subcategories.

start the screen saver program during drive recording
2| Clock Settings| /| Date and time settings.
3| Resolution| 1080P / 720P| Default is 1080P
4| Video Duration| 1min. / 2 min. / 3 min.| Default is 1 minute. Video duration when drive recording
5| Protect Level| Off / High / Low| Default is Off. Sensitivity of the Gravity sensor (G-Sensor). Emergency videos activated by collision will be locked and can not be overwritten.
6| Park Monitoring| Off / High / Low| Default is Off. Auto video recording for 1 minute when car is parked and sensed collision. Emergency videos activated by collision will be locked and can not be overwritten.
7| Keyboard clicks| Off / On| Default is On. Feedback sound of clicking.
8| Volume| 0-10| Default is 5. Volume of the device.
9| Language| English| System language.
10| Firmware Version| /| View the firmware version.
11| Flicker| 50Hz / 60Hz| Default is 50Hz.
12| Reset settings| Yes / No| Reset all settings back to factory settings, without deleting data from TF card.
13| Format TF- Card| Yes / No| Format the TF card and delete all data.

CarPlay / Android Auto and their settings

CarPlay or Android Auto will allow you to connect your mobile phone to the dashcam wirelessly and to manipulate your mobile phone Apps from the dashcam.

Please make sure in advance that your iPhone is above iOS 9 or your Android cellphone is above Android 11.

Click “CarPlay” or “Android Auto” on the main interface to enter the CarPlay or Android Auto interface and follow the following instructions to connect your mobile phone to the dashcam.

1. Turn on WiFi and Bluetooth option on your mobile phone;
2. Find this device “CAR-KIT-XXXX” in Bluetooth and connect to it;
3. Confirm to pair this device with your mobile phone through Bluetooth;
4.  Wait 1-3 minutes before entering CarPlay or Android Auto interface
   
   If you want to disconnect your mobile phone and the device, please turn off WiFi and Bluetooth on your mobile phone.
     Contact support@spedaltech.com for consultation

Recorder and its settings

Click “Recorder” on the main interface to enter the dashcam interface.

Note:

1. You can change resolution and time in Settings.
2. The audio recording status has two status: ON/OFF. You can switch the status by clicking on the “Audio recording” icon at the bottom of the screen. .
3. The lock file status has two status: Locked/Unlocked. You can switch the status by clicking on the “Lock File” icon at the bottom of the screen. .
4. The video length sign will appear only when a video is being recorded. You can change the video duration in settings. 。
5. The function “Switch Front and Rear Camera” can only be used when a back camera is connected to the device.

FM and its settings

Before using this function, please ensure at first that your mobile phone has been connected to the dashcam through CarPlay or Android Auto(refer to 3.2 CarPlay / Android Auto and its settings) and screen and sound synchronization have begun properly.

FM transmitter technology allows you to launch specific FM frequency (please make sure that this frequency is not occupied by any radio or broadcast) from the dashcam. Once you adjust the FM frequency on your car to the same level. The car’s loudspeaker will synchronize the sound from the dashcam which originate from your mobile phone. In other word, the users can play music or use navigation sound or any audio files on their mobile phones and the sound will come out from their car’s loudspeakers through the FM transmitter technology.

Click “FM” on the main interface to enter the FM interface. Adjust the FM frequency of your car to an available frequency that is not occupied by any radio or broadcast, for example to 91.0MHz if it is available. Then adjust the FM frequency of your dashcam to the same level of 91.0MHz to connect.

Playback and its settings

Playback Interface

Expanded File

APPENDIX

Specifications

Warranty

Thank you for purchasing the Spedal multifunctional dashcam. This unique product owns the CarPlay and Android Auto functions to bring extraordinary experience to your journey.

Customers enjoy a one-year warranty and after-sales service from the date of purchase. During this period, our company will actively respond to customers’ questions or problems and provide maintenance services for product failures under normal use. Delivery fee of the product sent to and back from the factory for repair or replacement shall be paid by the product owner or the person asking for repair.

The company reserves the right to reject maintenance requirements caused by the following conditions, including but not limited to:

1. Failure to follow instructions and improper use causing device failure or damage; .
2. Failure due to unauthorized disassembly, modification or maintenance of equipment; .
3. Accidental damages caused by any natural disasters or other force majeure factors; .
4. Warranty period of the device has expired; .
5. Purchases from unreliable sources such as second-hand products.

Please strictly follow the instructions in this manual to use this product to avoid unnecessary losses. If you have any questions or problems while reading the product manual or using the product, please contact us by

email: support@spedaltech.com or visit our official website.

References

• Spedal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>