Dong Guan Jin Qi Technology KPH-030 Bluetooth Keyboard Instruction Manual
- June 6, 2024
- Dong Guan Jin Qi Technology
Table of Contents
Keyboard Shortcuts
| Back| | Androids:
Home
WIN: f1| | Android, ios:
Search
WIN: f2
---|---|---|---|---|---
| Android, ios:
Selection
WIN: 13| | Android, ios:
Copy
WIN: 14| | Android, ios:
Paste
WIN: 15
| Android, ios:
Cut
VON: f6| | Androids:
Back
WIN: f7| | Android, ios: Play/pause WIN: f8
| Android, ios:
Forward
WIN: f9| | Android, ios:
Volume
VVIN: fl 0| | Android,ios: volume+ WIN:111
| Android,ios:
WIN: f9| | Lock screen| | Tab
| Caps Lock| | Enter| | Upshift
| Accessibility| | Control| | Alternate shift
| Space| | | |
Notice
- Using a long-lasting lithium polymer rechargeable battery, it can be used normally for several weeks ( can be charged at any time).
- When not in use for a long time, we recommend turning off the power switch to prevent power from escaping to extend battery life.
Energy-saving sleep mode
When the keyboard goes into sleep mode for 15 minutes without instructions, press any key and wait for 3 seconds. The keyboard will startup.
Troubleshooting
- Make sure the power is turned on.
- Make sure the keyboard is inoperable range coverage.
- Make sure the battery has electricity.
- Make sure the setting of Bluetooth on the tablet PC is turned on.
- Make sure the wireless keyboard is connected with Bluetooth.
- Make sure the wireless keyboard and Bluetooth have been Paired.
Cleaning
Clean the keyboard with clear water, alcohol or similar disinfectant;
-
Press the ‘CONNECT’ button on the keyboard, the Bluetooth connection indicator will flash, then the keyboard Bluetooth is activated and can be connected to tablet
-
Open and unlock your tablet and click on the tablet Settings icon.
-
In the ‘Settings’ interface, select ‘Bluetooth’, enter the Bluetooth setting interface, click the Bluetooth switch and click ‘Search Device’.
-
The tablet will search for the activated Bluetooth device, find the wireless keyboard signal, and click on this item to connect
-
Enter the PIN pairing code displayed on the screen on the keyboard and press ‘Enter’ to connect
-
After the pairing is completed, the status of the wireless keyboard will be displayed as ‘Connected
Product Parameter
- standard MICR interface
- Eutectic operation within 10 meters
- Modulation method: GFSK
- Working voltage: 3.0-4.2V
- Working current <2.5mA
- Standby current: <0.3mA
- Sleep current: <4CuA
- Charging current z 200mA
- Standby time: >100 days (calculated by eight hours per day)
- Charging time: backlight <3 hours, no backlight <2 hours
- Lithium battery capacity: backlight 800mA. no backlight 110mA
- Turn on the backlight for a sustainable working time: <5 hours, no backlighting. sustainable working hours: <44 hours.
- Lithium battery life: 3 years
- Lithium battery specifications: backlight 3.82774mm, no backlight 302323mm
Getting started guide
-
Keyboard-10 Inch
Bluetooth 3.0 Keyboard -10Inch -
CAPS indicator is
• • Keyboard input letter case light. in the state of a successful connection with the tablet press the Caps lock button on the keyboard, the CAN indicator is displayed in blue, the input letters are uppercase. then press the Caps lock button, CAPS indicator Oft the letters entered are lowercase. -
The indicator light is the Bluetooth indicator:
••When connecting the Bluetooth keyboard to the tablet press the connect code button light to be blue. It will flash continuously until the Bluetooth keyboard is successfully connected to the tablet and the Bluetooth indicator will automatically go out. -
The ‘Charge* ligth is the charging indicator:
•• The charging status is displayed in red. It will self-extinguish when fully charged. -
The tower ligth is the power indicator:
•• Turn on the Bluetooth switch to display in blue. It will automatically go out after 5 seconds. When the voltage is lower than 3.5V. the ‘Charge indicator flashes blue until the Bluetooth keyboard stops working, and automatically turns off. -
Special function keys
•• Blue Fn button with auxiliary function
•• Fn+Q Fn* W, Fn+E, switch to Android, Windows and IOS systems respectively. -
Charging When the battery is low. the power indicator will start flashing, which means it needs to charge.
••First step, get the charge line.put MICR plug (small head) into the MICR interface on the keyboard (note the direction)
••The second step is to connect the USB terminal to the power adapter or the USB interface of the computer.
•• The third step, the connection is successful, the charging status ‘charge will be red, and will automatically turn off when the power is full.
Keyboard shortcuts
1. Turn the keyboard’s power button to the ‘ON’ position, the power indicator
will light for 2-3 seconds, then go out.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: My changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may no cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
10-inch Bluetooth keyboard instruction manual
Containser ‘s guide x 1 Keyboard case x1 USB cable x 1