Dong Guan City Shengwei Lighting SW-ST24-L20BT Adapter Instruction Manual

SHOPLED
User Manual

WIFI RGB LED Strip Light With Remote Control

*RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Parameters

Installation Diagram

NOTE:
Please DO NOT plug Into the outlet for a long time when the strip light is rolled up, test the light when it is unfolded

Installation
a. Open the package and unfold the strip light
Please check whether the strip light appearance and all parts are in good condition. Then power the strip lig t to test whether it could light normally
b. Clean the surface of the obJect where the strip needs to be installed and keep it dry. Any dust and liquid will affect the stickiness of the 3M adhesive
C. Tear off the adhesive tape pastes the strop on the correct places at once time. (Note: Do not move the strip lig t lo other places after it is attached)
d. Press the strip firm from the beginning to the end to remove the air ram the strip and the surface of the object
e. The installation is over, please connect the power with the strip light. You can switch the light on/off and choose the color effect by using the IR remote

WIFI CONTROL, APP Installation

1. Search ‘Tuya Smart’ in ‘ Google Play Store for Android/ ‘APP Slore’for IO S or from the browser, then install it.

Connection Instructions

1. Click ‘+’ or’Add Device’, then choose ‘Llghl1ng’and ‘Strip Lights’
2. Confirm whether the strip light is blinking fasl firstly

1. If it is blinking fast, please skip the reset sleep, then click ‘Confirm indicator rapidly blink’. Enter WiFi password and confirm, then wait for the connection to complete
2. If it is not blinking fast, please follow the reset step by step. Click’Resetting Devices’to finish the setting. Then click confirm indicator rapidly blink’.
   Enter Wi-Fi password and confirm, then wait for the connection to complete

3. After connecting, you can rename this device, such as ‘Bedroom’, ‘TV Backlight’. which is convenient to manage later.
4. There are four different modules at the bottom of the page

1. RGB Color: lamp On/Off: change various colors, and increase/decrease their brightness by adjusting the first line.
   ( NOTE: If you need white color, just adjust the second line to the 0%) 2) DIY Function: There are 8 different scenes. Click ‘Edit’ to DIY your own favorite colors. You can reset the picture, name, and color. (NOTE: there are three different color modes ‘Static”Flash’ and ‘Breath’ for the ‘Scene Colour’. Just one color can be set for ‘Static’ mode, while the other two modes can set eight colors.)When ‘Reset’ is completed, click ‘Submit’ to keep this DIY color. 3) Music Sync: You can open the music player on your phone, then the strip light will blink and change color with the music rhythm or people talking (NOTE: The page must slay in the music module, otherwise they will not sync.) 4) Timing Function: You can set when the strip light is turned on and off every weekday, every weekend or every day. And you can also set how long the strip light will turn off.

5. Our strip light also can be controlled by third-party apps, such as Alexa, Google Assistant… And the existing device can be removed and connected to other devices.

IR REMOTE CONTROL

ATTENTION

1. Please DO NOT plug into the outlet for a long time when the strip light is rolled up. The strip light must be unfolded when you test it
2. The strip light must be instilled on a smooth, clean, and dry surface. When it is instead, do not plug into the outlet, and the bend should be avoided just in the position of the LED components, so as not to damage the product and affect its service life
3. The strip light should not be collided or crushed.
4. The strip light can be cut along the cutting mark. Please make sure the power is off first. (NOTE: NO repair tools are provided in the package.)
5. Do not connect the controller of any other brand to SHOPLED’s adapter.
6. Please pay attention to anti-static during the installation and use of the product. Do not use sharp objects to touch the product, and avoid damage to the product
7. Please make sure there is no hidden nail or metal conductive object in the contact part between the light and the wall. If there is, remove or avoid the conductive object in advance to prevent unnecessary short-circuit of the strip light
8. Children must use this strip light under the supervision of a guardian.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, ii not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

You also can scan the QR code below to install the App.

Thanks For Reading

If you have any questions, please feel free to contact us. We are always here for you. Customer satisfaction is our primary pursuit…
Email: support-eu@yk-shopled.com
Facebook: shopled

Sea&Mew Accounting Ltd
Electric. Avenue Vision 25 London,
Enfield EN3 7GB
Billy Han
info@seamew.net

Sea&Mew Consulting GmbH
Mit Iterate, Siraf3e 4 92318 Nleumarkl
Yuan Li
Compliance Eal@Outlook.com

Manufacturer: Dong Guan City ShengweiLighting Co., Ltd
MADE IN CHINA

References

• shopled.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>