FERM CDM1127 Cordless Impact Wrench 18V User Manual

FERM CDM1127 Cordless Impact Wrench 18V

Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.

Risk of electric shock.

Variable electronic speed.

Rotation, left/right.

Do not use in rain.

Indoor use only.

Class II machine – Double insulation – You don’t need any earthed plug.

Max temperature 400C.

Do not throw the battery into fire.

Do not throw the battery into water.

Do not dispose of the product in unsuitable containers.

Separate collection for Li-ion battery.

Time-lag miniature fuse-link.

The product is in accordance with the applicable safety standards in the European directives.

Additional safety warnings for drills and screw drivers

• Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Battery tool use and care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

For the charger
Intended use
Charge only CDA1096 type rechargeable battery packs. Other types of batteries may burst causing personal injury and damage.

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
• Children being supervised not to play with the appliance
• Do not recharging non-rechargeable batteries!
• During charging, batteries must be placed in the well ventilated area!

Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the power tool’s construction and design:

• Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained.
• Injuries and damage to property to due to broken accessories that are suddenly dashed.

Warning! This power tool produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this power tool.

Power cord replacement
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

MACHINE INFORMATION

Intended use
This 18V Cordless wrench is intended for driving in and loosening bolts.

Technical specifications

Vibration level
The vibration emission level stated in this instruction manual has been measured in accordance with a standardized test given in EN60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned.

• Using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level.
• The times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level.

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.

Description

The numbers in the text refer to the diagrams on pages 2- 3
Fig. A

1. Machine
2. Battery
3. Battery unlock button
4. Charger
5. Charger LED indicators
6. Chuck
7. Direction switch
8. On / off switch
9. Work light

Lithium-Ion technology
The battery provided with this machine have Lithium-Ion technology.

One advantage of using Lithium-Ion batteries is that, until the battery is almost empty, hardly and power fading is noticeable. The machine can be used until you start noticing that the power of the drill is elapsed. The battery is discharged now and needs to be charged.

Another advantage is that Lithium-Ion batteries have no memory effect. Therefore they can be charged at any moment without degrading, independent of the charging state of the battery.

OPERATING

The battery must be charged before first use.
Removing the battery from the machine Fig. B

• Hold the machine (1) firmly with one hand
• Push down the battery unlock button (3) located on the side of the battery (2) with the other hand.
• Keep pushing this button (3) down and slide the battery forward out of the machine, like shown in Fig. B.

Inserting the battery into the machine Fig. B
Ensure that the exterior of the battery is clean and dry before connecting to the charger or machine.

• Hold the machine (1) firmly with one hand
• Insert the battery (2) into the base of the machine as shown in Fig. B.
• Push the battery further forward until it clicks into place.

Charging the battery (with the charger) Fig. C

• Take the battery (2) from the machine
• Turn the battery (2) to upside down position and slide it onto the charger (4) as shown in Fig. C.
• Push the battery until it is fully pushed into the slot.
• Plug the charger plug into an electrical outlet and wait for a while. The LED indicators on the charger (5) will lighten up and show the charger status.

LED indicators (5)
Fig.C
The charger has 2 LED indicators (5) which indicate the status of the charging process:

Off

|

On

| Standby mode:

-No battery is inserted or,

-Battery inserted but charging has finished

On| Off| Battery charging in progress

• Fully charging the battery may take up to 180 minutes.
• After the battery is fully charged remove the charger plug from the outlet and remove the battery from the charger.
• The battery can be stored or directly installed on the machine.

Lithium-Ion cells can be stored for a long period without losing much of their charge. When the machine is not being used over a longer period of time it is best to store the battery in charged condition.

Fitting and removing sockets
Always remove the battery before mounting an accessory.

To mount the socket, firmly push it bit with even pressure on the machine.
To remove the socket, firmly pull it off the machine.

Adjusting the direction of rotation

• Set the direction switch (7) to position “←” in order to drive screws.
• Set the direction switch (7) to position “→” in order to remove screws

Switching the machine on and off
WARNING: Ensure fastener and/or system will withstand the level of torque generated by the tool.
Excessive torque may cause breakage and possible personal injury.
WARNING: Do not use regular socket wrench type sockets; use only those impact wrenchs. Sockets not designed for impact wrenches could break and result in personal injury.

Inspect sockets prior to use to ensure that they have no cracks or other visible damage.

1. Place the accessory on the fastener head. Keep the tool pointed straight at the fastener.
2. Pressing the on/off switch (8) will activate the machine, the further the switch is being pushed, the faster the drill will turn. Releasing the on/off switch (8) will stop the machine. Always check torque with a torque wrench, as the fastening torque is affected by many factors including the following:
   • Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening torque.
   • Accessory size: Failure to use the correct accessory size will cause a reduction in fastening torque.
   • Bolt size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade, and torque coefficient.
   • Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
   • Material: The type of material and surface finish of the material will affect fastening torque.
   • Fastening time: Longer fastening time results in increased fastening torque. Using a longer fastening time than recommended could cause the fasteners to be overstressed, stripped or damaged.
   • Move the direction reversing switch (7) to the middle position to lock the movement of the on/off switch. It cannot be activated in this position.

Only lay down the machine when it has stopped running completely. Do not place it on a dusty surface as particles of dust could get into the mechanism.

Work light (9)
Fig. A
The machine is equipped with a work light to illuminate the work location.

• It automatically switches on when the on/off switch is being pressed.
• It automatically switches off when the on/off switch is released again.

MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the battery pack from the machine.

Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

WARRANTY
The warranty conditions can be found on the separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.
The product and the user manual are subject to change. Specifications can be changed without further notice.

Spare parts list

Exploded view

Documents / Resources

| FERM CDM1127 Cordless Impact Wrench 18V [pdf] User Manual
CDM1127 Cordless Impact Wrench 18V, CDM1127, Cordless Impact Wrench 18V, Impact Wrench 18V, Wrench 18V
---|---

References

• FERM Power Tools - Power to create

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>