VEX ROBOTICS RAD16 VEX 123 Robot User Manual

VEX ROBOTICS RAD16 VEX 123 Robot

Custom manufactured in China for Innovation First Reading SARL. Distributed in the US.A, Mexico, Caribbean, Central & South America by VEX Robotics, Inc., 6725 W. FM 6/0, Greenville, IX 5402, USA, distributed in China by Innovation first International (Shenzhen), Ltd., Suite 1906, Excellence lower, 98 Fuhua Yi Road, Futian, Shenzhen, Guangdong, China 518048. Distributed in other regions by Innovation First Irading SARL, Innovation First Trading SARL, Parc Logistique Eurohub Sud, 3434- Dudelange, Luxembourg +352 2786 04 87. Distributed in Canada by / Distribué au Canada par/ Innovation First Reading, LLG, 6/25 W. FM 15/0, Greenville, 1X 75402, U.S.A.

INSTALLATION INSTRUCTION

CAUTION

1. Risk of fire and burns. Do not open, crush, heat above 60°Cor incinerates.
2. Do not recharge the battery pack that shows signs of leakage or corrosion.
3. Do not dispose of battery in fire.
4. Must be disposed of properly.
5. DoTO Never charges batteries unattended or without adult supervision.
6. Do not heat or set a battery on fire.
7. Do not disassemble or refit battery,

FCC Statment

his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. ThiS equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio cCommunications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance cOuld void the user s authority to operate the equipment. FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains license-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS{S). Operation is subject to the following two conditions: is device may not cause interference. This device must accept any interference, including interference that may cause undesired O OoueNAVCe

1. Use only with USBAC cable Dc5V Max.2A Keep the instructions since it contains important information
2. Chargers used with the toy should be regularly examined for damage to the cord, plug enclosure and other parts, and in the event of such damage, it must not be used until the damage has been repaired.
3. This Tov Contains batteries that are non-repackage

Li-ion Battery

1. Model: HFC1450
2. Voltage: 3.2V
3. Wh Rating: 1.60Wh
4. Capacity: 500mAh
5. Bump(+), Flat(-)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>