Phasemation PS-1200 Power Supply Unit Owner’s Manual

Phasemation PS-1200 Power Supply Unit

Product Information

• Product Name: Phasemation PS-1200
• Model: EA-1200

Safety Instructions

• Do not use the equipment if it is broken.
• Do not remodel the equipment.
• Never install the equipment near water.
• Never put an object filled with water on the equipment.
• Never put an object inside the equipment.
• If you notice any abnormal state such as smoke, strange smell, or unusual sounds, turn off the power switch and disconnect the AC plug. Contact the dealer for repair.
• Do not disassemble or remodel the equipment as it can result in a risk of fire.
• Do not use the equipment in the bathroom to avoid the risk of fire or electric shock.
• The equipment is designed for indoor use only. Do not expose it to water to prevent failures, fire, and electric shock.
• Avoid placing objects filled with liquids or small metal objects on the equipment to prevent the risk of fire or electric shock.
• If a foreign object falls inside the equipment, turn off the power switch and contact the dealer to avoid the risk of fire and electric shock.

WARNINGS

Do not use the equipment being broken.| |  In case of using the equipment in an abnormal state, such as seeing smoke, having strange smell and hearing unusual sounds or noise, this can result in a risk of fire or electric shock. If such an abnormal state occurs, turn the power switch off, and endure to disconnect the AC plug from the outlet. After no smoke is confirmed, ask dealer for the repair.
---|---|---
Never remodel the equipment.| |  Do not disassemble the equipment or do not remodel it. This can result in a risk of fire.
 | |  Do not use the equipment in the bathroom. This
Never install the| can result in a risk of fire or electric shock.
equipment near water.|  The equipment is designed for using indoors. Do not expose the equipment to water. This can result in a risk of failures, fire and electric shock.

Never put an object filled with water on the equipment.

| |  Do not put a vase, flower pot, glass or any object filled with skin lotion, chemical or water, or small metal object on the equipment. In case the liquids are spilled or the small objects fall inside the equipment, this can result in a risk of fire or electric shock.

Never put an object inside the equipment.

| |  If a foreign object has fallen inside the equipment, turn the amplifier’s power switch off, and contact the dealer. To keep using the equipment can result in a risk of fire and electric shock.

CAUTIONS

Cautions of Installation

| |  Do not install the equipment on the unstable tables or unstable places. In case the equipment falls, it can result in a risk of injury of customers.

Pay attention to the wiring of the cord so that a foot is not caught, or the person can stumble or the equipment can fall, which is so dangerous.

When moving the equipment, turn the power switch off, and endure to disconnect the power plug from the outlet and remove the connecting cord. The cord can be damaged and this can result in a risk of fire and electric shock.

---|---|---
Places which are not suitable for installation| |  Do not install the equipment in the humid or dusty environment. This can result in a risk of fire or electric shock.

Connection

| ****| When connecting with other audio equipment or a television set, read the manual of equipment, turn the power switch off, and connect according to the instructions.

Cautions of Installation

• Do not install the equipment on unstable tables or unstable places to prevent the risk of injury.
• Pay attention to the wiring of the cord to prevent tripping hazards or equipment falls.
• When moving the equipment, turn off the power switch, disconnect the power plug, and remove the connecting cord to avoid damage and the risk of fire and electric shock.
• Avoid installing the equipment in humid or dusty environments to prevent the risk of fire or electric shock
• When connecting with other audio equipment or a television set, refer to the respective manuals, turn off the power switch, and follow the instructions for proper connection.

Usage Cautions

In order to use the equipment for a long time, follow the instructions below:

• Do not install this equipment near a heat source such as direct sunlight or a stove.
• Avoid using this equipment in poorly-ventilated, humid, or dusty places.
• Do not install this equipment in unstable places such as slopes or vibrating areas.

Thank you for purchasing Phasemation product.
Read your Owner’s Manual thoroughly for proper operation before starting to use your equipment.
Please keep your Owner’s Manual with caution.

Installation place

In order to use the equipment for a long time, follow the instructions shown in below:

• Do not install this equipment near a heat source such as direct sun light, a stove and so on. Do not use this equipment at a poorly-ventilated, humid or dusty place.
• Do not install this equipment at an unstable place such as slope or vibrating place.
• Do not install this equipment near a window where the equipment can be exposed to rain. Do not install this equipment in a high humidity environment.
• Avoid using this equipment on an equipment generating heat such as an amplifier.
• Keep this equipment away from a power supply transformer or a motor of other equipments.

Note
Avoid covering the equipment with a cloth or installing it in enclosed space because radiation and air convection from the chassis surface can be hindered.
This unit has no intake or exhaust holes for heat dissipation to prevent the entry of exter-nal sound pressure and dust. The chassis is cooled by convection and the heat dissipat-ed from the unit is cooled by radiation and air convection from the chassis, which has high thermal conductivity.

Useable AC power supply voltage and frequencies

• AC 230V power supply must be supplied.
• The equipment operates normally in the both areas of 50Hz and 60Hz power supply frequen-cies.

Handling of AC power cable

• Do not touch the AC power cable with wet hands.
• Do not pull the cable strongly or bend the cable. The cable can be damaged and can result in a risk of fire and electric shock.
• Use the AC power cable of the accessories.

Repair

In case of equipment failure, consult the dealer.

Care of Equipment

• If the equipment is covered with dust or dirt, clean it with a soft cloth.
• If the equipment is covered with heavy dust, put a very thin mild detergent on a soft cloth. Wring the cloth and wipe off the dust and dirt. Then, clean with a dry soft cloth.
• Never use chemical agents such as thinner, naphtha and alcohol when cleaning it.
• If any of them is attached to the equipment, the silk printing can be flaked or the surface can lose metal luster.

Names and Functions

Power Supply Unit

1. POWER switch
   The power supply can be turned on or off by pressing the POWER switch.

2. POWER indicator
   The POWER indicator lights up blue when the power supply is supplied.

3. DC OUT
   The DC power supply is supplied from two connectors to the L and R Phono Equalizer units through two DC power junction cables of EA-1200 accessories. L and R are not assigned to two connectors. * It is not a problem to exchange (3) and (4) for the operations, but it may take about 30 seconds for the indicator light to turn off after turning the POWER switch to OFF.

4. AC IN
   Connect the AC power cable of the accessories to the AC INLET of the Power Supply Unit and plug it to an outlet. Connecting the two AC plugs of the power supplies to adjacent outlets can make the sound kept at high quality.

Power Connection

A circle is assigned on one side of the plug of the AC power cable so that better quality sound is reproduced by matching the power supply polarity with another equipment.
This polarity may be different due to the house wiring for the outlet or because of the power supply condition; however, generally the side with the circle should be inserted to the long slot of the outlet.

Connections

Trouble Shooting Guide

In case the equipment does not operate properly, check out the followings.
If it does not operate properly even after checking the advised points, endure to disconnect the AC plug from the outlet and then contact the dealer.

Firmly insert the outlet of AC power cable into the AC inlet of Power equipment.

Sound is not heard immediately after turning the power on.|

The vacuum tubes are worked in the equipment.

Sound is not outputted until the circuits become stable operation.

|  After turning the power supply to ON, please wait one minute.

User Support

As for the unclear matters with regard to the after service, please contact the dealer.

Specifications

Accessories: AC power cable (x1) and shorting connectors (x2)

• The power consumption is printed as “43W” on the power supply unit of EA-1200, but they are 33W each for both power supplies when two power supplies are used.
  The appearance and specifications of this equipment are subject to change without notice in order to improve it.

Kyodo Denshi Engineering Co., Ltd.

• 8-40-17 Shinyoshidahigashi Kohoku-ku Yokohama-shi Kanagawa 223-0058 Japan
• TEL 81-45-710-0975
• FAX 81-45-710-0976
• E-mail info@phasemation.com
• URL https://phasemation.com

References

• Phasemation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>