Dong Guan Jia Sheng Lighting Technology SP0000085 LED Lantern Speaker User Guide
- June 6, 2024
- Dong Guan Jia Sheng Lighting Technology
Table of Contents
Dong Guan Jia Sheng Lighting Technology SP0000085 LED Lantern Speaker
Technical Specification
| light source | Dimmable LED(0.4W/2000K) |
|---|---|
| Luminance | 30lm High(100%) |
| Speaker Power | 5W |
| Transmission Type | Bluetooth V5.1 |
| Dimensions | Ø 110 x 270mm |
| Weight | 500g |
| Battery spec | Li-ion rechargeable battery 3.7V 1700mAh |
| Battery charge time | 4 hours(DC5V-1A/TYPE-C) |
| Playing time | Up to 10 hours(@70% volume Pop music) |
| Lighting time | 8 hours on high / 36 hours on low |
| IP Rating | IPX4 |
Bluetooth
transmission distance| 8M (Transmission distance differs depending on the
environmental factors of your phone or Bluetooth device)
Country of origin| China
Include Contents
- Main unit x 1
- Instruction manual x 1
- TYPE-C charging cable x 1
Use method/Bluetooth
- Press and hold the audio switch for 3 seconds to send out theprompt tone, and then the device can be started.
- Turn on the Bluetooth device, search and connect the “LED Lantern
- Speaker”device,and a tone will be given after the connection is successful.
- Music can be played when the Bluetooth device is connected
- Volume adjusted by playback device.
- Low battery warning: When the power supply is insufficient, there will be a sound indicating charging.
Indicator status
Graphic
Use method / LED Light
FCC STATEMENT
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>