DONG GUAN LONG SHENG TENG ELECTRONICS CO LTD X9 Helmet Bluetooth Headset Instruction Manual

DONG GUAN LONG SHENG TENG ELECTRONICS CO LTD X9 Helmet Bluetooth Headset

Specifications:

• Product: X9 Helmet Bluetooth Headset
• Features: Intelligent noise reduction, Connect two mobile phones, Stereo music, Waterproof, Compatible with IOS/Android, Voice call, Voice prompt, Playback control, Bluetooth phone function, Large capacity battery
• Components: Headset with hard tube, headset with soft clamp base, microphone (optional), cable mic (optional), adhesive base hook surface Velcro

Product Usage Instructions

Installation Steps:

3.1 Clamping Installation:

1. Clip the base spring clip along the edge of the helmet on the left side and secure it.

2. Align the card slot of the base with the buckle of the host and slide it downward to tighten it.

3. Apply a fur-faced Velcro to the reserved speaker positions on the left and right ears of the helmet.

4. Fix the hook facing Velcro on the back of the speaker with the
   attached fur facing Velcro.

5. Secure the microphone butterfly-shaped adhesive plate with Velcro on the left side of the helmet.

6. Organize the speaker cable and hide it at the edge of the helmet. Insert the headphone plug into the host’s headphone port to complete the installation.

3.2 Adhesive Installation:

1. Clean the surface of the helmet on the left side and attach the hook Velcro.
2. Align the card slot of the base with the host’s buckle and slide it downward to tighten it.
3. Refer to Clamping Installation steps for installing speakers and microphones.

Disassembly Steps of Main Engine:

1. Unplug the earphone plug.
2. Press down on the base clamp clamping device.
3. Remove the host upwards.

Frequently Asked Questions

• Q: Is the X9 Helmet Bluetooth Headset waterproof?
  • A: Yes, the X9 Helmet Bluetooth Headset is waterproof, providing protection against water exposure.
• Q: Can I connect two mobile phones simultaneously to the X9 Helmet Bluetooth Headset?
  • A: Yes, you can connect two mobile phones at the same time to the X9 Helmet Bluetooth Headset for convenience.
• Q: How do I activate the intelligent noise reduction feature?
  • A: The intelligent noise reduction feature is activated automatically when you use the headset; it helps reduce background noise for clearer audio.

Packing List

Function introduction

Installation steps

Clamping installation

1. At the appropriate position on the left side of the helmet, clip the base spring clip along the edge of the helmet and secure it.
2. Align the card slot of the base with the buckle of the host and slide it in a downward direction to tighten it
3. Apply a fur faced Velcro to the reserved speaker positions on the left and right ears of the helmet
4. Fix the hook facing Velcro on the back of the speaker with the attached fur facing Velcro (on the left side of the short line speaker sticker)
5. At a suitable position on the left side of the helmet, secure the microphone butterfly shaped adhesive plate with Velcro, adjust the hose, and place the microphone close to the mouth.
6. Organize the speaker cable and hide it at the edge of the helmet. Insert the headphone plug into the headphone port of the host and complete the installation.

Adhesive installation

1. On the left side of the helmet, place it in a suitable position and clean the surface of the helmet, then attach the hook velcro.
2. Firstly, remove the spring clip, then attach the fur faced Velcro to the base, align it with the hook faced Velcro attached to the helmet, and secure the adhesive base to the helmet.
3. Align the card slot of the base with the buckle of the host and slide it in a downward direction to tighten it.

Disassembly steps of the main engine

1. Unplug the earphone plug.
2. Press down on the base clamp clamping device.
3. Remove the host upwards

Product introduction

Function operation description

On/Off key

• Power on: Press and hold for 3 seconds, hear the voice prompt
• Power on”, and the red and blue lights of the M key flash alternately
• Power off: Press and hold for 3 seconds, and hear the voice prompt “Turn off”. The blue light on the M key flashes twice and goes off
• Pairing: After turning on, the red and blue lights on the M key flash alternately. Open the Bluetooth search on your phone, find the name “X9”, click on the connection, and hear a voice prompt “Connection successful”. The blue light on the M key flashes  slowly, and the pairing is complete.
• Chinese and English voice switching: Double click and hear a prompt sound before turning on the unpaired phone.
• Answer call: In the incoming call state, press briefly once to answer the call. (No need to operate buttons in automatic answering mode)
• Terminate call: In call mode, briefly press once to end the call.
• Redial call: Double click to redial the last call when the connection is successful.
• Reject call: In the incoming call state, press and hold for 2 seconds to reject the call.
• Music playback: Short press in music mode.
• Music pause: Short press in music mode.

M key

• Breathing light: Short press the M button in a cycle, the breathing light will flash slowly, quickly, turn off, and turn on
• Voice Assistant: After successful pairing, double-click the M key to wake up the phone’s voice assistant

Volume plus key

• Volume up: In music/call mode, press and hold until you hear the “thump” sound to end the adjustment.
• Previous song: Short press once while playing music
• Automatic/manual answer switching: After successfully connecting, double-click and hear a “dong” sound to indicate successful switching.

Volume reduction key

• Volume reduction: In music/call mode, press and hold until no sound is heard, and then adjust.
• Next track: Short press once while playing music

Charge indicator

• The on/off button lights up red when charging, and the red light goes out when fully charged.

Parameter specification

• Bluetooth version: 5.3
• Bluetooth distance: ≥ 10 meters
• Horn unit:Φ40mm 32Ω
• Working time:40 hours
• Standby time: 300 hours
• Rechargeable battery: 3.7V/800mA lithium battery
• Charging time: 2 hours
• Charging interface: type C
• Charging voltage: USB 5V 1A

Matters needing attention

• Do not touch the product with sharp objects to avoid scratching or damage。
• Do not expose the product to open fire to avoid explosion hazard。
• Do not try to disassemble the product to avoid product damage
• If the product is not used for a long time, please store it in a dry place and charge it regularly (once a month) to ensure that the product can work normally

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>