IPOWER N3 Compact Microprocessor Charger for NiMH Battery Instruction Manual
- June 16, 2024
- IPOWER
Table of Contents
IPOWER N3 Compact Microprocessor Charger for NiMH Battery
Product Introduction
The charger uses 110~240VAC mains power and charges 5~8cell MINH batteries
with up to 1.5A charge current.
Specification
| Input Voltage: | 110VAC~240VAC |
|---|---|
| Output Current: | 1.5A |
| Charging Model: | pre-charged, steady current, monitoring, automatic protection |
| Charging Capability: | 5-8 cells NiMH/NicD Battery Pack |
| Max Power : | 16.8W |
Instructions
-
There are 2 LED lights, One is power light, other one is showing charging state. And the button between 2 LED is power “on/off” button, used to turn on/cut off power.
-
Connect charger with power supply, power light turn ”green” charging light turn “green”,(note: charging light keep “red” only when charging, it will turn “green” when there is no battery connect with charger or battery have been fully charged)
-
Connect battery and charger as instruction,(note: if battery be connected in reverse, charger can be damaged easily) push “on/off” button start charging.(note: “on/off” button’s default setting is “off”) Then charger start with charging model, charging light turn”red”.
-
Charging light turn ”green” when battery were fully charged, now please stop charging.charging light turn”red”.
WARNING
This charger is designed to charge only 5~8 NiCd/NiMH batteries.
Make sure that the battery is compatible with the charger’s charge rate.
Never let children operate unsupervised while it’s power on.
Supervision from an adult.
The charger is for indoor use only. Do not use in case of high humidity or
condensation.
Do not attempt to open or modify the charger’s case.
Do not let objects or liquids penetrate the charger’s cooling vents.
The charger can get hot during use, use the charger in a well ventilated area
,away from people and electrically conductive or inflammable materials.
If the battery has suspicious reactions during the charge or discharge, such
as overheating,
venting or leaking ,immediately disconnect the battery and store it in a safe
location, away from people and inflammable materials.
Packing List
iPower N3 Pro Charger × 1
Power Cord × 1
Instruction manual × 1
CUSTOMER SUPPORT
For more products, please go and visit the official website:
http://ipowerbatteries.com
All specifications and figures are subject to change without notice.
Printed in China ©2012
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>