CRESSI Analog Devices PD2 Pressure Gauge Instruction Manual
- June 16, 2024
- CRESSI
Table of Contents
CRESSI Analog Devices PD2 Pressure Gauge
Product Information
Specifications
- Brand: Cressi
- Model: Cressi-sub
- Standards: UNI EN 13319:2000, UNI EN 250:2014, EU 2016/425 PPE CE 0474 1216100
- Material: PVC
- Depth Rating: 50m/164ft
- Maximum Pressure: 230/300
Product Usage Instructions
Step 1: Preparation
Before using the Cressi-sub, make sure to perform the following steps:
- Inspect the equipment for any damage or defects.
- Ensure that all seals and connections are secure.
- Check that the depth rating and maximum pressure of the device meet your diving requirements.
Step 2: Putting on the Cressi-sub
To wear the Cressi-sub, follow these steps:
- Put on your diving suit and ensure it is properly fitted.
- Attach the Cressi-sub to your diving suit using the provided straps or clips.
- Adjust the straps to ensure a snug and comfortable fit.
Step 3: Diving Procedures
When using the Cressi-sub underwater, follow these guidelines:
- Ensure you have proper training and certification for scuba diving.
- Monitor your depth and pressure readings on the Cressi-sub display.
- Follow safe diving practices, including regular checks of your equipment and maintaining proper buoyancy.
- Communicate with your diving partner using agreed-upon signals.
Step 4: After Diving
After your dive, perform the following steps:
- Rinse the Cressi-sub with fresh water to remove any salt or debris.
- Allow the device to dry thoroughly before storing it in a cool and dry place.
- Inspect the device for any signs of damage or wear and address any issues before your next dive.
Frequently Asked Questions (FAQ)
What is the maximum depth rating of the Cressi-sub?
The Cressi-sub has a depth rating of 50 meters or 164 feet.
How do I attach the Cressi-sub to my diving suit?
You can attach the Cressi-sub to your diving suit using the provided straps
or clips. Make sure they are securely fastened.
Can I use the Cressi-sub for scuba diving?
Yes, the Cressi-sub is suitable for scuba diving. However, ensure that you
have proper training and certification before using it.
How should I clean the Cressi-sub after diving?
Rinse the Cressi-sub with fresh water to remove any salt or debris. Allow
it to dry thoroughly before storing it.
Where can I contact Cressi for more information?
You can contact Cressi through their website at
www.cressi.com or via email at
info@cressi.com.
info@cressi.com
Cressi-Sub Cressi Sub S.p.A. Cressi-sub Cressi sub
Rev_04_2023
Cressi Sub S.p.A.
Headquarters: Via G. Adamoli, 501 16165 Genova, Italy + 39 010 830791
info@cressi.com