XCLEAR TT000160 Clear Protection Premium Bundle Instruction Manual
- May 15, 2024
- xclear
Table of Contents
XCLEAR TT000160 Clear Protection Premium Bundle
TECHNICAL SPECIFICATIONS
| Brand | XClear |
|---|---|
| Product | Clear Case and Screen Protectors |
| Model | iPhone 14 Pro Max |
Model Number
| TT000160. TT000161, TT000162, TT000163, TT000164, TT000165
Phone Model:| iPhone 14 Pro Max
---|---
Screen Protector Materials:| Super 9H Tempered Glass
Case Materials:| Premium TPU and PC
Screen Protector Quantity:| 3 PCS
Crystal Clear Case Quantity:| 1 PC
Screen Protector Color:| Clear
Wireless Charging Compatibility:| Yes
Screen Surface Resistance:| Yes
Raised Bezels:| Yes
SCREEN PROTECTOR INSTALLATION
Step 1: First, use a wet wipe and then a dry wipe to completely clean.
Step 2: Use a dust-absorber sticker to remove any dust off the screen.
Step 3: Place the screen protector onto the screen. Ensure the tab is facing the screen. All holes and corners should be aligned.
Step 4: Place the guide stickers onto one side to secure the protector in place.
Step 5: Flip the protector over and peel off the adhesive film by the tab.
Step 6: Slowly place the screen back onto the phone using the guide stickers as a hinge.
Step 7: Press down from the center and spread out to the sides to adhere to the screen protector. Slowly push any air bubbles to the edges. Then, remove the guide stickers.
Step 8: Congratulations! Your phone is now protected!
STEEL RING INSTALLATION
Step 1: Peel off the adhesive film on the Steel Ring.
Step 2: Install the Steel Ring on the OUTSIDE of the case based on the imprinted guideline.
Step 3: Once the Steel Ring is aligned, remove the Guidance Film. (NOTE: If you decide to install the Steel Ring at a later time, peel off and put the Guidance Film in a safe location.)
Watch our 2-minute Installation Video without any extra hassle with the link below www.myunu.com/xclear/screen-protector- installation.
FAQ
- Q: Does the clear case support wireless charging?
- A: Yes. The clear case DOES support wireless charging. However, it is extremely important the clear case is applied properly and is centred across the wireless charging pad.
- Q: Is the clear case compatible with a magnetic wireless charger?
- A: Yes. You have to stick the Steel Ring onto the back of the clear case to work with a magnetic wireless charger.
- Q: If any air bubbles are remaining, how do I remove them?
- A: Air bubbles are completely normal. Use your fingers to push any remaining air bubbles to the edges of the screen. If any persist, please wait 24 – 48 hours for them to disappear naturally.
- Q: Are there raised edges/bezels along the lips of the clear case? What are these raised edges for?
- A: Yes. These specially raised bezels help slightly lift the screen and camera lens to help prevent minor scratches and damage from minor drops or daily wear and tear.
warning
The XClear Premium Bundle is NOT a TOY. It can cause serious harm or injury if improperly used. Read through the following Warnings Section to help avoid any potential accidents that may occur to you or the product.
- The product is NOT a TOY. Keep AWAY from children.
- DO NOT chew on, eat, or swallow any part of the product.
- DO NOT overly bend, break, snap, or drop the product.
- DO NOT modify or disassemble any part of the product.
- If either the screen or lens protector becomes damaged from absorbing an impact, carefully remove it because there MAY be sharp pieces that could cause CUTS.
- DO NOT attempt to install any part of the product without following proper instructions.
- If either the screen or lens protector is misaligned, please re-install it.
- Check your proper iPhone model BEFORE purchase.
- DO NOT attempt a drop test with the silicone case. It was designed to absorb minor drops from only 6 feet max.
- The product was designed for casual and professional use. Please Use Accordingly.
DOES YOUR PHONE FEEL SAFE, STYLISH, AND PROTECTED WHILE USING OUR PRODUCT? LET US KNOW!
If you are happy using our product or have any questions or concerns, contact us at: https://support.myunu.com/hc/en-us.