Vape Club Efest Lush Box Charge Instruction Manual
- June 1, 2024
- Vape Club
Table of Contents
Vape Club Efest Lush Box Charge Instruction Manual
Efest LUSH BOX LED Indicator Charger Operation Manual
(English)
Specification
Operation Instructions
- Battery charging function
-
The LUSH BOX will start the self-detect function once the charger is connected to an external power source and begins to charge.
-
The indicators of the charging status & battery percentage in standby mode/fully charged turns blue color, white color while charging.
-
If the voltage of the two batteries are different, the LED screen switches to display the value of the two batteries every 5 seconds and gives priority to the lower voltage battery. The LUSH BOX will charge them at the same time when the voltage of two batteries are close to the same.
-
The LUSH BOX will stop charging automatically and the LED show as fully charged 100%. Charging resume when voltage of the battery is lower than 4.14V.
Note: The charging indicator will go out when an error occurs, such as poor connection, dead battery, wrong operation.- Output Function
-
Regardless of whether the LUSH BOX is battery powered or powered by an external power source, the output function is valid in both cases. And the output and input functions can also be performed simultaneously.
-
If the LUSH BOX is battery powered only, please long press the right button for 2 seconds to turn it on. Quick press the right button twice or no activity showing in 32 seconds, the LUSH BOX will turn off.
-
If the voltage of the batteries is inconsistent, the LUSH BOX discharges the higher voltage battery first, they will be discharged at the same time when the batteries reach the same voltage level.
-
The output function will be closed if no device is reconnected in 32 seconds, and the power of the charger will be turned off.
-
When the battery voltage is less than 3.0V, the LED may flash to remind the insufficient capacity. That indicates it’s time to have your batteries charged or replaced. The USB output will be closed to prevent the battery from being damaged due to the over discharge.
Features
- Safe and convenient DC cord (5V /2.1A)
- Automatic selective charging modes: 12.1A/21.0A
- Safe charging mode: CC & CV
- USB Output: 5V / 2.1A
- Only compatible with 18650 3.6V/3.7Vli-ion batteries
- Available to charge and discharge at the same time
More
- Fashion, modern and curve appearance design
- Low voltage smart activation recovery function(≤2.7V)
- High quality fire retardant material
- Reverse polarity protection function
- Automatic over-charging protection
- Short-circuit protection
- Auto-detect charging function
- Authoritative certificates: CE, RoHS and FCC
- Global insurance
WARNING: PLEASE READ BEFORE USE
- Connect the DC cable to the LUSH BOX port before plug into power source.
- Please check the battery specification before charging for compatibility with LUSH BOX. If not used correctly, it may cause damage to the battery or the charger.
- Please try to remove the battery and load it again for disconnection or reset when the charger shows wrong display or abnormal function due to external interference or loose battery.
- Please remove the battery and wait for the status indicator to go out before adding a new battery to charge.
- Do not charge the battery if the battery’s wrapper is damaged to prevent explosion, leakage or fire.
- Do not use the LUSH BOX in flammable or explosive environment.
- Please keep the LUSH BOX in a dry environment.
- Please take out battery and unplug the DC cable while the LUSH BOX is not in use.
- Keep the LUSH BOX out-of-reach of children.
- To dispose the LUSH BOX, please comply with local regulatory processes for recycling or disposal.
- Please clean the LUSH BOX regularly to maintain the cleanliness of the positive and negative contacts to deter foreign objects and prevent poor contact.
- Misusing or mishandling chargers can pose a SERIOUS RISK to personal injury, property damage, or even death.
- Never leave a charging charger unattended.
Thanks for your support
Welcome to contact us
Shenzhen Fest Technology Co.,Itd
Address: Longhua district, Shenzhen, Guangdong, China
Tel: 86-755-89304183
Fax: 86-755-27764602
Web: www.efestpower.com
Wholesale email: efest@efestpower.com
Warranty service: help@efestpower.com
HOW TO OBTAIN WARRANTY SERVICE?
Send a clear video that shows details of your Efest product’s issue and
attachment with your serial number and receipt to
help@efestpower.com.
An Efest representative will help determine whether your Efest product
requires service, if it does, Efest will inform you how Efest will provide it.
When contacting Efest via telephone, other charges may apply depending on your
location.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>