CRESSI B.C.D.S Buoyancy Control Device Instruction Manual
- June 16, 2024
- CRESSI
Table of Contents
CRESSI B.C.D.S Buoyancy Control Device
Product Information
The product is a B.C.D. (Buoyancy Control Device) or a stabilizing jacket used for scuba diving. It is designed to provide buoyancy control and support to the diver during underwater activities. The B.C.D. is not a life-saving device and should not be relied upon for surface flotation.
Specifications
- Manufacturer: Cressi
- Model: B.C.D.’S
- Product Code: Not specified
- Country of Origin: Italy
- Weight: Not specified
- Size Range: Not specified
Product Usage Instructions
Preparing the B.C.D.
Before using the B.C.D., ensure that it is properly assembled and in good
working condition. Check all straps, buckles, and valves for any signs of
damage or wear. If any issues are found, do not use the B.C.D. and contact the
manufacturer for assistance.
Attaching the B.C.D. to the Cylinder
To attach the B.C.D. to the scuba cylinder, follow these steps:
- Place the B.C.D. on a stable surface with the back facing up.
- Position the cylinder on top of the B.C.D., aligning it with the designated cylinder strap attachment points.
- Securely fasten the cylinder straps around the cylinder, ensuring a tight and secure fit.
- Double-check that the cylinder is securely attached to the B.C.D. and there is no movement or looseness.
Adjusting the B.C.D. Fit
To ensure a proper fit and comfort while wearing the B.C.D., follow these
steps:
- Put on the B.C.D. by sliding your arms through the shoulder straps.
- Fasten the waist strap around your waist, ensuring a snug fit without restricting breathing or movement.
- Adjust the shoulder straps to achieve a comfortable fit, with the B.C.D. resting comfortably on your back.
- Secure any additional straps or buckles on the B.C.D. for added stability and security.
Using the B.C.D. Controls
The B.C.D. is equipped with various controls for buoyancy control and
inflation/deflation. Familiarize yourself with the following controls:
- Inflation Hose: Used to connect the B.C.D. to the scuba regulator for air supply.
- Low-Pressure Inflation Valve: Allows controlled inflation of the B.C.D. using the air supply from the scuba cylinder.
- Overpressure Relief Valve: Releases excess air from the B.C.D. to prevent over-inflation.
- Deflation Valve: Allows controlled deflation of the B.C.D., releasing air to decrease buoyancy.
Safety Precautions
When using the B.C.D., always follow these safety precautions:
- Ensure proper training and certification in scuba diving before using the B.C.D.
- Never exceed the recommended weight capacity of the B.C.D.
- Regularly inspect the B.C.D. for any signs of damage or wear.
- Always dive with a buddy and maintain communication throughout the dive.
- Practice proper buoyancy control techniques to ensure a safe and controlled descent/ascent.
FAQ
Q: Can I use the B.C.D. as a life jacket?
A: No, the B.C.D. is not a life-saving device and should not be relied upon
for surface flotation. It is designed specifically for underwater use during
scuba diving.
Q: How do I find the user manual in my language?
A: You can find the user manual in your language on the Cressi website in
the MANUALS & SOFTWARE section or by scanning the provided QR code.
Q: How do I contact Cressi for support?
A: You can contact Cressi by visiting their website at
www.cressi.com and navigating to the Contact Us
section for information on how to reach their nearest branch.
Cressi Sub S.p.A.
Headquarters: Via G. Adamoli, 501 16165 Genova, Italy
+ 39 010 830791 [email protected]