LISKA SV-S30 Smart Watch Instructions

: June 6, 2024
: LISKA

Table of Contents

SV-S30
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SV-S30

Smart Watch
Instructions

1. App download and supported system.

Download and install the app “FFit” by search “FFit” in “App Store” on iphones or in “Google Play” on Android phones. Or hand ring clock interface slide to find the two-dimensional code icon click to download the corresponding two- dimensional code.
Mobile phone must support Android 4.4 and above / iOS 8.2 and above / Bluetooth 4.0 and above

IOS Android Google play

2. Proper wear and kindly reminder.

2.1. Generally wear at 1-2 finger width from wrist join. The sensor of smart watch should be close to skin. Sensor for accurate heart rate monitoring result, it is not recommended to wear tightly and does not shake. Otherwise, it will affect the blood circulation.
2.2. With the functions of water resistant, sweat proof, rain-proof, it can be used directly in daily washing, shower (cold water) and other daily environments.
2.3. Do not use in bath, sauna, hot spring or other hot environments with hot water and steam, which will lead to product failure.
2.4. Owing the action of water pressure, do not wear it while swimming or diving.

3. Product overview

power button
Back
Glass frame
1.3in dial
Charging contact
Optical sensor
Strap

4. Basic operations.

4.1. Power button: Press it to turn on/off the screen display. Hold it to turn on or off the watch.
4.2. Back button: press it to go back to the previous interface.

Note: When LED indicator is flashing, it means the watch is monitoring heart rate, blood pressure. Do not directly look at the blinking sensor light when detecting, with may cause eye irritation.

5. Charging watch.

5.1. Attach the equipped magnetic charger to the metal contact on the back of the watch, and insert the other end off the charger into USB wall charger or USB interface of computer.
5.2. Charge under the following circumstances: Use at the first time. When the battery is low and power off automatically.
5.3. Screen display in charging state.

Note: Do not directly look at the blinking sensor light when charging, which may cause eye irritation.

LISKA SV-S30 - Charging

Charging port
Charger

6. Main menu.

On clock interface, swipe left and right to switch the interfaces of main functions. Swipe ut to easily switch the interfaces between secondary function and clock. Scroll down to switch to the settings interface.

7. Specifications.

Screen size……………………… 1.3 inch
Bluetooth distance………….. 10 m in the open space
Waterproof……………………… IP68
Battery…………………………….. 360mAh
Standby time…………………… 40 days
Working time………………….. 15-20 days
Charging time…………………. 2.5 hours
Dimensions……………………. 46 mm x 46 mm x 12 mm
Weight……………………………. 51 gr
Charging………………………… 5 V / 500 mAh USB charger
Touch screen…………………. color screen TFT 240 x 240 dpi
Body material………………… Cambered acrylic + Al Alloy
Band material…………………. Silicone
Notifications………………….. Facebook, Skype, Twitter, Whatsapp, Line, etc…

8. Introduction of main functions.

8.1. Heart rate and blood pressure monitor.
At the heart rate or blood pressure interface, the bracelet will automatically monitor your heart rate or blood pressure for about 30 seconds, and the sensor light will flash green during the detection. In addition, you can select my device in the “my” page of the application to open continuous heart rate monitoring, after which the bracelet will automatically start continuous monitoring of your heart rate and synchronise to the application.
Although this product is used for real-time dynamic detection of heart rate, please keep your body inactive or still during the detection. Otherwise, the time of heart rate detection will be prolonged or the data cannot be measured. When you get the measurement data from the hand ring, you can check the real- time dynamic heart rate data. If there is a big difference in the measurement data, please take a break and measure again. The average value obtained after 5 consecutive measurements will be more accurate.
This product is a real-time dynamic heart rate measurement. The heart rate will be different in talking, drinking, eating and other situations. When you are calm, the detection heart rate may be closer to your actual situation.
The measured data of heart rate and blood pressure are for reference only and cannot be used as the basis for medical related aspects.
8.2. Sleep monitor: In this feature, you can see the total sleep time each night, time to fall asleep, time to get up, and so on. The sleep data detected by the bracelet will be synchronized with a manual drop-down refresh of the “health” interface in the application.

9. Introduction of secondary functions.

9.1. Clock main interface selection: find the setting icon in the time interface, click the theme selection to access its function, you can switch a main map, or in the case of connecting devices, click the “my” page in the App, in the dial market to choose their favorite main map interface, a total of 21 optional.
9.2. Multi-motion mode: on the time interface, slide to the motion icon and click on the icon to access its function, slide up to browse 9 different ports, the select your favorite sport and click start.
9.3 Settings: find and click this icon to access its functions, which will display a list of related items, including: theme selection, screen time, system. In the system interface can restart, restore factory settings, check the device model, shut down. If the application cannot search the bracelet, reset it.
9.4. Warm reminder: only when the connection with “FFit” application is successful, can the date, time, step, message reminder, incoming call reminder and other data of the bracelet be synchronized.

10. Binding.

Tips for first pairing and connecting.

10.1. Please ensure that the Bluetooth and GPS of your phone have turned on before access to the App.
10.2. After opening the App, please register an account and enter your personal information according to the prompt. In order to ensure the normal connection and use of the bracelet, please allow these requests for receiving information, making calls, etc… please make sure that your phone has agreed to “FFit” that the App can access the relevant programs.
10.3. Please make sure the bracelet battery is fully charged and keep the bracelet close to the phone when connecting.
10.4. When the bracelet and App are connected for the first time, the time, date, steps, calories, etc… of the bracelet will he synchronized to the phone. If the connection is disconnected for a long time, the time data will not be updated, and the App needs to be bound again to update.

How to connect: Mine — Connect a device — Select equipment model

At this moment, there are two situations:

iOS System: A pairing request will appear, so you just click “confirm” to connect.
Android phones: No pairing request, direct connection.

1. Binding is complete. Note: You need to blind your watch in this App, or directly via phones Bluetooth connection.
2. If it can’t search for the device model of the hand ring, please check whether the above tips are met or to reset the watch. Note: set the “about” option of the system icon on the interface to see the watch device model.

Bluetooth auto reconnection:

There is no reminder on the watch when out of the Bluetooth connection range. However, Bluetooth will automatically reconnect when the watch reaches the valid range of the Bluetooth connection.
If you close the background application, restart the phone, or disconnect the device in the App, you need to enter the “FFit” App to reconnect.

11. App – Main pages (Health – Data – Care – Mine)

Health Page: Tap the center banner to access the records heart rate and blood pressure. Slide the phone in this interface to refresh the data. Click to GPS, and 3 seconds later you can enter the movement track. Click the icon in the upper right corner to exit the interface.
Data page: You can check motion data, sleep data, heart rate and blood pressure data, etc…
Care page: Click the icon + to add friends who have registered with this application. You can add them by searching for their ID.
Mine page: Moving target: set a goal for each day. Sleep target: Set your target sleep duration. My device: you can choose to open or disable the wrist lift screen, call reminder, text message reminder, etc… Open the third-party settings in more reminders, you can click to open the application message you want to receive, and you can also set the functions such as water reminder, sedentary reminder, meeting reminder, etc…
Note: In more settings, notifications for all applications are turned off by default, and if you want to receive messages or calls from this application, you need to turn on notifications for the corresponding application.
Shake snapshot: click on this item in the App, the watch will display the camera icon, shake the watch, and take a photo with the hand behind the 3 second hand.
Find device: Click find device search watch, if the search is successful, the watch will vibrate.
Using help: you can see the instructions.