TONOR TW360 Wireless Microphone Instruction Manual
- June 16, 2024
- TONOR
Table of Contents
TONOR TW360 Wireless Microphone
Specifications
- Product Name: UHF Wireless Microphone
- Model: TW360
About This Manual
Thank you for purchasing a TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorporated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience. Enjoy your microphone!
Package Including
- UHF Wireless Microphone (Model: TW360)
Operating Environments & Notes
When using this device, please keep the following in mind:
- Keep the device away from water.
- Use the device in a well-ventilated environment and keep it away from fire.
- Since it’s a wireless device, please keep it away from other interfering sources.
- Do not take apart the device.
- Use the standard power supply, as high voltage may damage the device.
- Place used batteries into the recycle bin, do not litter them.
MICROPHONE OPERATION INSTRUCTION
As shown in the above pictures:
- Display Screen
- On/Off Switch
- Tail Tube
- Volume +
- Setting Button
- Volume
- Battery Compartment
Installation of Batteries
Before using the wireless microphone, follow the instructions below to
install the batteries:
- Take down the tail tube of the microphone.
- Install 2*AA batteries and tighten the tail tube of the microphone.
Note: T he positive and negative polarity of the battery cannot be reversed.
Microphone Operation
Follow these instructions to operate the microphone:
- Press button 2 to turn on the microphone. Press it for 2 seconds to turn off.
- Press button 5 to change the frequency displayed on the screen.
- Use button 4 or 6 to adjust the volume.
Warranty
TONOR provides 2 years of after-sales service, offering free replacement for products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If you exceed the 30-day Amazon return policy, you can still contact us through our Shopify TONORMIC. We will serve you with full sincerity!
Conditions and Restrictions for Using Frequencies
There may be special conditions and restrictions for using frequencies in
your country. Before putting the product into operation, find the information
for your country at the following address: https://www.tonormic.com/pages
/permitted-frequency-bands
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Operating Frequency
US: 902.8-908.2MHz
A MIC: 902.8MHz, 903.4MHz, 904MHz, 904.6MHz, 905.2MHz, 905.8MHz,
906.4MHz, 907MHz, 907.6MHz, 908.2MHz
Contact Information
For support or inquiries, please visit https://www.tonormic.com or email us at support@tonormic.com
Thank you for purchasing a TONOR wireless microphone. This manual is intended
to help you understand all about this microphone and how to use it. TONOR
always strives for the ultimate user experience. All our knowledge and passion
for audio technology are incorporated into building microphones with high
performance for you. The TONOR microphone is high quality and easy to use to
achieve the best user experience.
Enjoy your microphone!
TONOR Team
Package Including
OPERATING ENVIRONMENTS & NOTES
- When using this device, keep it away from water.
- Use the device in a ventilated environment, and keep it away from fire.
- Since it’s a wireless device, please keep it away from other interfering sources.
- Don’t take apart the device.
- Please use the standard power supply, high voltage may damage the device.
- Please place the used batteries into the recycle bin, don’t litter them.
SPECIFICATIONS
- Frequency Response: 40Hz-18Khz
- Maximum Radio-frequency Power Transmitted: -5.14 dBm
- Operating Frequency(US): A MIC: 902.8-908.2MHz
- Operating Range : Up to 60m
- Frequency Stability: ±10ppm
- SNR: ≥90dB
- S ound Distortion: ≤0.5%
- Mic Input Sensitivity: -52dB±3dB(0dB=1v/μ bar at 1KHz)RF
- Sensitivity : -95dBm
- Operating Temperature: 0˚C to +55˚C
MICROPHONE OPERATION INSTRUCTION
As shown in above pictures:
- Display Screen
- On/Off Switch
- Tail Tube
- Volume +
- Setting Button
- Volume –
- Battery Compartment
Install 2*AA batteries before using the wireless microphone and installing instructions is as follows:
- Take down the tail tube of a mic.
- Install the batteries and tighten the tail tube of the mic.
Note: The positive and negative polarity of the battery cannot be reversed.
Instruction
- Press button 2 to turn on. Press it for 2s to turn off.
- Press button 5, and then the frequency on the screen will be changed.
- Press buttons 4 or 6 to adjust the volume.
WARRANTY
TONOR provides 2 years of after-sales service, and free replacement of
products that are NOT damaged resulting from accident, alteration, misuse,
negligence, or abuse. If exceeding 30 days of Amazon return policy, you can
still contact us through our Shopify TONOR-MIC. We will serve you with full
sincerity!
Conditions and restrictions for using frequencies
Conditions and restrictions for using frequencies
- There may be special conditions and restrictions for using frequencies in your country.
- Before putting the product into operation, find the information for your country at the following address: https://www.tonormic.com/pages/permitted-frequency-bands
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Operating Frequency（US）
A MIC
- 902.8-908.2MHz
- 902.8MHz, 903.4MHz, 904MHz, 904.6MHz, 905.2MHz, 905.8MHz, 906.4MHz, 907MHz, 907.6MHz, 908.2MHz）
https://www.tonormic.com
support@tonormic.com
FAQ
- Q: How do I change the frequency on the wireless microphone?
- A: Press button 5 on the microphone to change the frequency displayed on the screen.
- Q: What should I do if my wireless microphone gets wet?
- A: If your wireless microphone comes into contact with water, immediately remove the batteries and dry the microphone thoroughly before using it again.
- Q: Can I use a high-voltage power supply with a wireless microphone?
- A: No, please use the standard power supply. High voltage may damage the device.
- Q: How long is the warranty for the TONOR wireless microphone?
- A: The TONOR wireless microphone comes with a 2-year warranty for after-sales service. Please refer to the warranty section in the manual for more details.
FUJIAN EASTWEST LIFE WITH TECHNOLOGY CO., LTD | RM 1201-1205, BLD 18, 2ND
PHASE OF INNOVATION PARK, FUZHOU 350108, CHINA
EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE
G106 DOVER, DE 19901 UNITED STATES
LIFEWIT LIMITED | UNIT 2, VINCENT HOUSE, FIRCROFT WAY, EDENBRIDGE UNITED
KINGDOM
Lifewit GmbH | Friedenstraße 5 97072 Wuerzburg Germany
MADE IN CHINA
WEEE ID: DE 57064210
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged
to try to correct the interference by one or more of the following measures:
- — Reorient or relocate the receiving antenna.
- — Increase the separation between the equipment and receiver.
- — Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- — Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
ISED Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>