DDPAI N5 Dash Cam User Guide

June 16, 2024
DDPAI

DDPAI N5 Dash Cam User Guide
DDPAI N5 Dash Cam

SPECIFICATIONS

Product Name: Dash Cam
Model: N5 Dual
Input: 5V 2A
Resolution: 3840 X 2160
Dimensions: 102 x 21.9 x 36mm
Memory Card: SD card U3 and above

PACKAGE CONTENTS

  • Dash Cam

  • OBD Power Cable

  • Electrooptic Stacker

  • 3M Adhesive

  • Car Wire Trim Tool

  • User Guide

  • Rear Camera

  • Rear Camera Extension Cable

  • Power Cable

PRODUCT OVERVIEW

PRODUCT OVERVIEW

  1. Lens
  2. USB Type-C Port
  3. Indicator
  4. Rear Camera Port
  5. MIC
  6. Speaker
  7. Function Button
  8. Memory Card Slot
  9. Mounting Bracket

INDICATOR GUIDE

Indicator System Status
Steady Green Recording
Flashes Green Emergency Event
Steady Blue Upgrading
Steady Purple Parking Monitoring
Steady Red Not Recording / Abnormal Lens
Flashes Blue Bluetooth Authorization

INSTALLATION

  1. Clean your windshield and attach the electrostatic sticker to the recommended area as shown in the figure below. Make sure you remove air bubbles between the sticker and the glass.

  2. Take out the Dash Cam, tear off the 3M adhesive protective film attached to the mounting bracket, and stick the adhesive surface to the windshield. Ensure the installation position is behind the rearview mirror and does not interfere with the driver’s vision, as shown in the figure below.

  3. Use the power cable to connect the dash cam to the cigarette lighter socket. Use the car wire trim tool to run the power cable along the front windshield and the roof, and hide the cable inside the Pillar A.
    INSTALLATION
    Note: Radar module is not included in the package, please purchase separately if needed. The figure above is for reference only.

  4. Peel off the lens protective film and start the vehicle, you will hear the Dash Cam’s power-on tone, and the indicator on the device will stay green.

  5. Connect the Dash Cam to the DDPAI App, refer to the reference line displayed on the preview interface, and rotate the bracket to adjust the camera angle. For more installation details, please scan the QR code below to watch the Installation video.
    QR Code
    For more parking monitoring functions, contact your local dealer or purchase the hardwire kit and radar module on online platforms. Scan the QR code below to watch the installation video.QR Code

  6. Connect the rear camera to the Dash Cam. Please refer to the figure below for the specific wiring location.
    wiring location

APP INSTRUCTION

Install DDPAI APP

Scan the QR code below or search for “DDPai” in Google Play Store (Android) or App Store (iOS) to download the DDPAI App.
QR Code

Connect N5 Dual with Smart Phone

  1. Keep the Dash Cam and mobile phone within 2.5 meters.
  2. Launch the DDPAI App, enter the “Device” interface and tap “+ Connect New Device”. Then tap “Screen-less Dash Cam”.
  3. Tap “Next” > “Connect to WI-Fi” in turn, and the detected Wi-Fi of the Dash Cam (such as DDPAI_NS Dual_XXXX) will be displayed.
  4. For iPhone: When you enter the “Settings” interface, select “WLAN”> “DDPAI_NS Dual_XXXX”, enter the initial password (1234567890), and tap “Join”. For Android phones: In the Wi-Fi list, select “DDPAI_NSDual_XXXX”, enter the

Preview

Once the Dash Cam is successfully connected to the DDPAI App, you can preview footage from the front camera and rear camera. Landscape mode: Tap or rotate your phone horizontally. View footage from the rear camera: Tap to switch the camera.
Preview

Playback

Drag the melena forward or backward in the monitoring screen to view the video at a specific me. Wait for approximately 5 seconds, or you can directly tap the thumbnail to start playing the previously recorded video.
Playback

Download Video Files

  1. Drag the timeline forward or backward in the monitoring screen to select the starting point of the recording you wish to download.
  2. Then tap to enter the download interface.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference.
    2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly Approved by the party responsible for compliance could void the user’s authority to operate the equipment

FCC ID: 2AJFX-N5

RF warning statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.

CONTACT

www.ddpai.com
feedback@ddpai.com
DDPAI Technology Co., Ltd

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals