Suptek MA2790-2M200 RV TV Mount Installation Guide

Suptek MA2790-2M200 RV TV Mount

Product Information

Specifications

• Min VESA: 75×75
• Max VESA: 200×200
• VESA Pattern
• Weight Capacity: 15kg (33lbs)
• TV Size: 13 – 43
• Profile: 120-407MM (4.7-16)

Unpacking Instructions
Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts. Carefully read all instructions before attempting installation.

Important Safety Information:
Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation.

Please call a qualified installation contractor for help if you:

• If you don’t understand these directions or have any doubts about the safety of the installation.
• If you are uncertain about the nature of your wall, consult a qualified installation contractor.

Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Product Usage Instructions

1. Step 1: Take the bracket apart
   Pull out the bolt and force the protective buckle apart to remove the arm from the wall plate.

2. Step 2: Installation of wall plate and wall
   Make sure the thickness of your RV wooden board is above 0.5. Attach the wall plate to the wall using screws A, ensuring they are firmly tightened to prevent unwanted movement. Verify that the wall plate is securely fastened to the wall before proceeding to the next step.

3. Step 3: Assemble plate, extender brackets, and TV
   Use the extender brackets package to attach the plate and extender brackets to the TV. Follow the provided instructions for proper assembly.

4. Step 4: Assemble arm and wall plate
   Insert the arm into the wall plate, aligning the holes. Make sure it is securely attached.

5. Step 5: Connect TV and arm
   If you need to fix the arm, insert the bolt into the holes on the arm and wall plate. If you need to release the arm, simply insert the bolt into the wall plate for storage.

6. Step 6: Cable management
   Insert the TV into the arm and use the short set screw to secure it. Adjust the tilt or rotation of the TV by adjusting the three screws on the plate.

FAQ

• Q: What is the weight capacity of this TV mou nt?
  A: The weight capacity of this TV mount is 15kg (33lbs).

• Q: What is the recommended TV size for this mount?
  A: This mount is suitable for TVs ranging from 13 to 43 inches in size.

• Q: Can I use this mount on wood studs or a concrete wall?
  A: This TV mount is designed for RV use and includes wall mounting hardware specifically for RV wooden board installation. If you want to install it on wood studs or a concrete wall at home, you may need additional hardware, which can be obtained at your local hardware store or by contacting the manufacturer.

RV TV Mount Installation Instruction

UNPACKING INSTRUCTIONS
Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts. Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

• Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein.
• Use proper safety equipment during installation.
• Please call a qualified installation contractor for help if you:
• If you don’t understand these directions or have any doubts about the safety of the installation.
• If you are uncertain about the nature of your wall, consult a qualified installation contractor.
• Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Screw Package

Extender Brackets Package

Step 1 Take the bracket apart

Take the bracket apart and get parts below

Step 2 Installation of wall plate and wall

Warning: Please double check the thickness of your RV wooden board to make sure it is above 0.5”.
Remind: This TV mount is designed for RV use. We only include the wall mounting hardware for RV wooden board installation. If you want to install this mount on wood studs or concrete wall at home, you may need additional hardware, which can be gotten at your local hardware store or feel free to contact the manufacture.

2 screws A MUST BE firmly tightened to prevent unwanted movement of wall plate. Ensure the wall plate is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, please make sure you install this TV mount in the right up direction as shown above.

Step 3 Assemble of plate, extender brackets and TV

Step 4 Assemble of arm and wall plate

Insert the arm into the wall plate.

• If you need to fix the arm, insert the bolt into the holes on the arm and wall plate as shown above.
• If you need to release the arm, you just insert the bolt into the wall plate for storage as shown above.

Step 5 Connect TV and arm

Step 6 Cable management

The tightness of joint can be adjusted by wrench F. The plastic covers can be pulled out for cable management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>