LUTRON RMKS-DAL4-SZ DALI Dimmer User Manual
- June 16, 2024
- Lutron
Table of Contents
LUTRON RMKS-DAL4-SZ DALI Dimmer
Product Information
Specifications:
- Input: 220-240V
- Zone: 1
- Load Control Power: DALI
- Frequency: 868MHz
- Rated Power: 250W
- Dimensions: 32mm (H) X 46mm (W) X 153mm (D)
Product Usage Instructions
TYPICAL OWNED SPACE WITH DAYLIGHT / CELLULAR OFFICE WITH DAYLIGHT
To use the product in a typical owned space with daylight or cellular office with daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors and daylight sensors.
- If manual override is required, use the LUTRON PK2-3BRL-TAW-L01 Pico Wireless 3 Button Control with Raise/Lower.
- For occupancy sensing, use the LRF3-OCR2B-P-WH Occupancy Sensor.
- For daylight sensing, use the LRF3-DCRB-WH Daylight Sensor.
TYPICAL SHARED SPACE WITH DAYLIGHT / OPEN OFFICE WITH DAYLIGHT
To use the product in a typical shared space with daylight or open office with daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors and daylight sensors.
- If manual override is required, use the LUTRON PK2-3BRL-TAW-L01 Pico Wireless 3 Button Control with Raise/Lower.
- For occupancy sensing, use the LRF3-OCR2B-P-WH Occupancy Sensor.
- For daylight sensing, use the LRF3-DCRB-WH Daylight Sensor.
TYPICAL SHARED SPACE WITHOUT DAYLIGHT / OPEN OFFICE WITHOUT DAYLIGHT
To use the product in a typical shared space without daylight or open office without daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors.
- If manual override is required, use the LUTRON PK2-2B-TAW-L01 Pico Wireless 2 Button Control.
- For occupancy sensing, use the LRF3-OCR2B-P-WH Occupancy Sensor.
TYPICAL OWNED SPACE WITHOUT DAYLIGHT / CELLULAR OFFICE WITHOUT DAYLIGHT
To use the product in a typical owned space without daylight or cellular office without daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors.
- If manual override is required, use the LUTRON PK2-2B-TAW-L01 Pico Wireless 2 Button Control.
- For occupancy sensing, use the LRF3-OCR2B-P-WH Occupancy Sensor.
TEMPORARILY OWNED SPACE WITHOUT DAYLIGHT / MEETING ROOM WITHOUT DAYLIGHT
To use the product in a temporarily owned space without daylight or meeting room without daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors.
- If manual override is required, use the LUTRON PK2-2B-TAW-L01 Pico Wireless 2 Button Control.
- For occupancy sensing, use the LRF3-OCR2B-P-WH Occupancy Sensor.
TEMPORARILY OWNED SPACE WITH DAYLIGHT / MEETING ROOM WITH DAYLIGHT
To use the product in a temporarily owned space with daylight or meeting room with daylight, follow these steps:
- Refer to the plans for locations and quantities of occupancy sensors and daylight sensors.
- If manual override is required, use the LUTRON PK2-3BRL-TAW-L01 Pico Wireless 3 Button Control with Raise/Lower.
- For occupancy sensing, use the LRF3-OKLB-P-WH Wireless Corner Mounted Occupancy/Vacancy Sensor.
- For daylight sensing, use the LRF3-DCRB-WH Daylight Sensor.
FAQ
-
Q: What is the input voltage for the product?
A: The input voltage is 220-240V. -
Q: What is the maximum load control power?
A: The maximum load control power is 250W. -
Q: What is the frequency of the product?
A: The frequency is 868MHz. -
Q: What are the dimensions of the product?
A: The dimensions are 32mm (H) X 46mm (W) X 153mm (D).
TYPICAL OWNED SPACE WITH DAYLIGHT / CELLULAR OFFICE WITH DAYLIGHT
TYPICAL SHARED SPACE WITH DAYLIGHT / OPEN OFFICE WITH DAYLIGHT
TYPICAL SHARED SPACE WITHOUT DAYLIGHT / OPEN OFFICE WITHOUT DAYLIGHT
TYPICAL OWNED SPACE WITHOUT DAYLIGHT / CELLULAR OFFICE WITHOUT DAYLIGHT
TEMPORARILY OWNED SPACE WITHOUT DAYLIGHT / MEETING ROOM WITHOUT DAYLIGHT
TEMPORARILY OWNED SPACE WITH DAYLIGHT / MEETING ROOM WITH DAYLIGHT
TYPICAL CLASSROOM – SWITCHING
TYPICAL MANAGED SPACE WITH DAYLIGHT / LECTURE THEATER WITH DAYLIGHT
OCCASIONALLY VISITED SPACE WITHOUT DAYLIGHT / TOILET WITHOUT DAYLIGHT
OCCASIONALLY VISITED SPACE WITH DAYLIGHT / TOILET WITH DAYLIGHT
TYPICAL BREAKROOM – DIMMING
TYPICAL CORRIDOR – STANDALONE
TYPICAL CORRIDOR – CORRIDOR HOLD
- TYPICAL VIVE HUB FOR SYSTEM PROGRAMMING, DEMAND RESPONSE, AND TIMECLOCK (OTHER OPTIONS AVAILABLE)
- TYPICAL VIVE HUB FOR SYSTEM PROGRAMMING, BMS INTEGRATION, DEMAND RESPONSE, AND TIMECLOCK (OTHER OPTIONS AVAILABLE)
WIRING LEGEND
- INPUT POWER (NORMAL)
- 4 mm2
- ♦ 0-10V / DALI SIGNAL: 1.5mm^2
- 1- WAY RF COMMUNICATION
- 2- WAY RF COMMUNICATION
SYMBOL LEGEND
- WIRELESS DAYLIGHT SENSOR
- WIRELESS VACANCY SENSOR
- WIRELESS OCCUPANCY SENSOR
- WIRELESS RECEPTACLE
- WIRELESS ZONE KEYPAD
- WIRELESS SCENE KEYPAD
SPEC
WIRELESS NETWORK:
- A. RF FREQUENCY: 868 MHZ; OPERATE IN FCC GOVERNED FREQUENCY SPECTRUM FOR PERIODIC OPERATION; CONTINUOUS TRANSMISSION SPECTRUM IS NOT PERMITTED.
- WIRELESS SENSORS, WIRELESS KEYPADS AND WIRELESS LOAD CONTROL DEVICES DO NOT OPERATE IN THE NOISY 2.4 GHZ FREQUENCY BAND WHERE HIGH POTENTIAL FOR RF INTERFERENCE EXISTS.
- B. LOCAL ROOM DEVICES COMMUNICATE DIRECTLY WITH EACH OTHER (AND NOT THROUGH A CENTRAL HUB OR PROCESSOR) TO ENSURE:
- RELIABILITY OF SYSTEM PERFORMANCE.
- FAST RESPONSE TIME TO EVENTS IN THE SPACE (E.G. BUTTON PRESSES OR SENSOR SIGNALS).
- INDEPENDENT OPERATION IN THE EVENT OF THE WIRELESS HUB BEING REMOVED OR DAMAGED.
WIRELESS KEYPADS
- A. DOES NOT REQUIRE EXTERNAL POWER PACKS, POWER OR COMMUNICATION WIRING.
- B. ALLOWS FOR EASY REPROGRAMMING WITHOUT REPLACING UNIT.
- C. INCLUDES LED TO INDICATE BUTTON PRESS OR PROGRAMMING MODE STATUS.
- D. MOUNTING:
- CAPABLE OF BEING MOUNTED WITH A TABLE STAND OR DIRECTLY TO A WALL UNDER A FACEPLATE, BACKBOX OPTIONAL.
- E. 10 YEAR BATTERY LIFE
LUTRON NOTES:
ALL DIMMING BALLASTS TO BE LUTRON ECOSYSTEM, ECOSYSTEM H-SERIES, OR HI-LUME 3D TYPE UNLESS OTHERWISE NOTED. ALL DIMMING DRIVERS TO BE LUTRON ECOSYSTEM DRIVERS: HI-LUME 1%; HI-LUME 1%WITH SOFT-ON, FADE-TO-BLACK; 5-SERIES; OR HI- LUME PREMIER 0.1% UNLESS OTHERWISE NOTED. E.E. TO CONFIRM ALL CIRCUITING REQUIREMENTS. ARCHITECT TO VERIFY QUANTITY, LOCATION & FINISH OF ALL CONTROLS. LUTRON FIELD SERVICE COMMISSIONING INCLUDED IN ALL SYSTEMS INITIATES AN 2 YEAR LIMITED WARRANTY. THE ELECTRICAL CONTRACTOR MUST CONTACT LUTRON (1-844-588-7661) TO SET UP VISIT WITH 10 DAYS NOTICE.
TYPICAL VIVE SYSTEM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>