Gizzu GUDP36W Mini Dual DC UPS User Manual

User Manual

GUDP36W

Thank you for choosing the Gizzu DC UPS. Before operating this unit please ensure that you read the user manual carefully in order to make sure that best possible performance is obtained.
Always check the voltage, current, and polarity of your device in order to select the correct corresponding voltage when connecting to the UPS.

Dual-voltage DC Output UPS Package

1. GUDP36W
2. AC power cable
3. DC output cable (2 ends)
4. User manual
5.  Warranty cord

 Product display

1.  ON/OFF Switch
2. Output Socket (5V/9V/12V)
3. Output Socket (5V/9V/12V)
4. AC Input Socket
5. Output Voltage Selector (12V/9V/5V)
6. Output Voltage Selector (12V/9V/5V)
7. 5V/9V/12V DC LED Indicator
8. 5V/9V/12V DC LED Indicator
9. Buttery SOC LED

 Features

1. Power your CPE (Fibre Box) and Router from one device thanks to dual-voltage DC outputs
2.  High Capacity Lithium-lon Batteries
3.  Built-in Apadter allows for wider AC voltage range (100-240 Vac)
4. Intelligent Protective Design: Over-Change, Over-Discharge and short circuit protection

Highly Compatible

How to Use

1. In order to prevent battery over-discharge, please restart the UPS when AC is available after low battery cut-oft
2. When the UPS is plugged in, the electric charge module gives the Lithium-Ion battery o constant charge. This ensures that there is sufficient power whether the UPS is on or off. The input voltage range is 100 -240V AC
3. Please check the normol working voltage and polarity on the original adapter before connecting loads to the UPS.
4. Press the power button for 2-3 seconds to turn on the UPS. The output voltage indicator shows the current output voltage of the DC ports. You con choose either of the following output voltages: 5V/9V/12V (DC 1 output), and 5V/9V/12V (DC 2 output), by sliding the voltage selector. The AC indicator will light up and the battery will be charged when the Mains ore on (whether the UPS is on or off). The AC indicator light will switch off when the Moins are cut off or if it’s over/ under-voltage. Battery status indicator will show the copacity in four degrees (25%, 50%. 70%, 100%). The indicator will shine when charging. Press the power button for 2-3 seconds again to turn the UPS off.
5. When the UPS battery is running low, it’ll automatically shut down. It will restart when power has been restored to the unit and the AC has recovered.
6. Please keep the UPS in a cool environment after it has been fully charged and will not be used for an extended period. Charging of least once a month is highly recommended.

Specifications

Model name| GUDP36W|
---|---|---
Weight| -460g
Input voltage| 100-240vcc / 50-60Hz
Output| DC 1 Interface| DC 2 Interface
Output voltage (optional)| 5,9J2Vdc| 5V, 9V, 12V / 3A
Output polarity| – -C— +| 5,9J2Vdc
Output current| | – -C— +
Quantity & capacity of battery| 2200mAh x4 (Lithium-Ion) 32.56Wh|
Unit dimentions (mm)| 182 x107 x 32mm

*Products specifications are subject to change without notice
Warning
Please ensure that the combined power draw of connected devices does not exceed 36W. The maximum output of connected devices must not be exceeded under any circumstances. Failure to adhere to this warning may result in damage to the unit.
To determine the amount of power demand in Watts (W), look on the unit’s Marking Plate (usually on the Power Adopter or located on the rear of the unit. displaying the Model). Under ‘Power Input”, take the Voltage (V) and multiply it by the Amperage (A) to determine the Wattage (W).
Example: 5V 2A = lOW (5V x 2A = 10W)
Caution: If the combined power draw of both connected devices exceeds 36W, then it will cause damage to the Gizzu Mini UPS.

1. Always check the voltage, current, and polarity of your device in order to select the correct corresponding voltage when connecting to the UPS.
2. Charge the UPS fully before first use.
3. Dropping, damaging, disassembling, or repairing the UPS will void the warranty.
4. Do not let the UPS come into contact with water, fire, or excessive heat.
5. Faults/defects; please return to the place of purchase with receipt if in warranty.
6. Keep the UPS out of reach of children.  

Warning: Disassembling or intentionally damaging this product will void your warranty. Do not short circuit the batteries. Always dispose of batteries properly (never into open flame or water). Keep the device clear of heated surfaces and avoid storing it in environments where the temperature exceeds 60°C (140°F).
131-011301-00

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>