LUTRON G-3003SD AC-DC Magnetic Meter User Manual
- October 30, 2023
- Lutron
Table of Contents
LUTRON G-3003SD AC-DC Magnetic Meter
Product Information
The SD Card Real Time Recorder and AC/DC Magnetic Meter is a professional magnetic measurement tool that can measure DC or AC magnetic fields. It has a wide measurement range and can measure in units of Gauss (G) or milli Tesla (mT). The meter has a DC magnetic range of 300.00 mT and 3000.0 mT, and an AC magnetic range of 150.00 mT and 1500.0 mT. The resolution for DC measurement is 0.01 mT/0.1 mT, 0.1 G/1 G, and for AC measurement is 0.01 mT/0.1 mT, 0.1 G/1 G. The meter features a Hall sensor, zero adjustment, and a separate probe for easy measurement. It also has a real-time SD memory card datalogger with a built-in clock and advanced memory card settings.
Features
- Wide range, professional magnetic measurement
- Unit: G (Gauss), mT (milli Tesla)
- DC or AC magnetic measurement
- DC magnetic range: 300.00 mT, 3000.0 mT
- AC magnetic range: 150.00 mT, 1500.0 mT
- Resolution: 0.01 mT/0.1 mT, 0.1 G/1 G
- DC polarity: N/S (north/south pole)
- Sensor: Hall sensor
- Zero adjustment
- Separate probe, easy to make the measurement
- Real-time SD memory card datalogger, built-in clock
- Datalogger Sampling Time Setting range
- Memory Card Advanced setting
- Data Hold Memory Recall Sampling Time of Display DataV Output
- Operating Temperature: 0 to 50°C
- Operating Humidity: Less than 85% R.H.
- Power Supply : Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 PCs, or equivalent. ADC 9V adapter input (AC/DC power adapter is optional).
General Specifications
- Circuit: Custom one-chip of microprocessor LSI circuit
- Display: LCD size: 52 mm x 38 mm. Dot matrix LCD with backlight
- Measurement: mT milli Tesla Unit: G Gauss
- Accuracy: DC, AC
- Sensor: Hall sensor
- Frequency: AC measurement: 50 Hz/60 Hz
- Temp.: Probe head build the Temp. sensor Compensation for using the ATC (automatic Temp. for hall sensor compensation)
- Field Direction: Uniaxial
- Power Current:
- Normal operation (w/o SD card save data and LCD Backlight is OFF): Approx. DC 14 mA
- When SD card save the data and LCD Backlight is OFF): Approx. DC 37 mA
- If LCD backlight on, the power consumption will increase approx. 12 mA
- Weight Dimension:
- Meter: 489 g/1.08 LB. 177 x 68 x 45 mm (7.0 x 2.7x 1.9 inch)
- Probe: 198 x 25 x 19 mm (7.8 x 1.0 x 0.7 inch)
- Accessories Included:
- Instruction manual: 1 PC
- Magnetic Probe: 1 PC
- Hard carrying case (CA-06): 1 PC
- 1.413 mS Conductivity Standard Solution: CD-14 SD memory card (2 GB)
- Optional Accessories:
- AC to DC 9V adapter
- USB cable, USB-01
- RS232 cable, UPCB-02
- Data Acquisition software, SW-U801-WIN
- Excel data Acquisition software, SE-E802
Product Usage Instructions
To use the SD Card Real Time Recorder and AC/DC Magnetic Meter, follow these steps:
- Insert six alkaline or heavy-duty DC 1.5 V batteries (UM3, AA) or equivalent into the meter or connect an ADC 9V adapter input (AC/DC power adapter is optional).
- Attach the magnetic probe to the meter’s separate probe, and turn on the meter by pressing the power button.
- Select the measurement unit for Gauss (G) or milli Tesla (mT) and select the DC or AC magnetic measurement mode.
- Select the range for measurement. The DC magnetic range is 300.00 mT and 3000.0 mT, and the AC magnetic range is 150.00 mT and 1500.0 mT.
- Adjust the zero if needed, and make sure the probe is aligned with the magnetic field to be measured.
- The measurement reading will be displayed on the LCD screen with the option to freeze the display reading, display the maximum and minimum values, and recall data from memory.
- For real-time data recording, insert an SD memory card (1 GB to 16 GB) into the meter and set the clock time (Year/Month/Date, Hour/Minute/Second), sampling time, auto power off management, beep sound on/off, and decimal point of SD card setting.
- For manual data recording, press the data logger button once to save data one time. Set the sampling time to 0 second for manual mode, or select the 1 to 99 position (location) number.
- For data output, connect the optional RS232 cable UPCB-02 or USB cable USB-01 to get the RS232 plug or USB plug. The meter also comes with Data Acquisition software SW-U801-WIN and Excel data Acquisition software SE-E802.
Model : MG-3003SD
FEATURES
-
Wide range, professional magnetic measurement.
- Unit : G ( Gauss ), mT ( milli Tesla ).
- DC or AC magnetic measurement.
- DC magnetic range : 300.00 mT, 3000.0 mT.
- AC magnetic range : 150.00 mT, 1500.0 mT.
- Resolution : 0.01 mT/0.1 mT, 0.1 G/1 G.
- DC polarity : N/S ( north/south pole ).
- Sensor : Hall sensor.
- Zero adjustment.
- Separate probe, easy to make the measurement.
- Real time SD memory card Datalogger, built-in Clock
and Calendar, sampling time can set from 1 sec to 8 hour 59 min. 59 sec.
- Manual datalogger is available, during execute the manual datalogger function, it can set the different
location no. ( position 1 to position 99 ).
- Innovation and easy operation, computer is not need to setup extra software, after execute datalogger, just take away the SD card from the meter and plug in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/date/ hour/minute/second ) to the Excel directly, then user can
make the further data or graphic analysis by themselves.
- SD card capacity : 1 GB to 16 GB.
- LCD with green light backlight, easy reading.
- It can default auto power off or manual power off.
- Data hold, record max. and min. reading.
- Microcomputer circuit, high accuracy.
- Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.
- RS232/USB PC COMPUTER interface.
- Wide applications: PCB industries, water conditioning, aquariums, beverage, fish hatcheries, food processing,
photography, laboratory, paper industry, plating industry, quality control, school & college, water conditioning.
GENERAL SPECIFICATIONS
Circuit| Custom one-chip of microprocessor LSI
circuit.
---|---
Display| LCD size : 52 mm x 38 mm.
Dot matrix LCD with backlight.
Measurement
Unit
| mT| milli Tesla|
G Gauss
Measurement Range
( DC function )
| mT| Range| 1| 300.00 mT x 0.01 mT
Range| 2| 3,000.0 mT x 0.1 mT
G| Range| 1| 3,000.0 G x 0.1 G
Range| 2| 30,000 G x 1 G
Measurement Range, AC
( AC function )
| mT| Range| 1| 150.00 mT x 0.01 mT
Range| 2| 1,500.0 mT x 0.1 mT
G| Range| 1| 1,500.0 G x 0.1 G
Range| 2| 15,000 G x 1 G
Accuracy
( 23± 5 ℃ )
| DC| ± ( 5 % rdg. + 10 digit )
AC| ± ( 5 % rdg. + 20 digit )
Sensor| Hall sensor.
Frequency
Response
| AC measurement :
50 Hz / 60 Hz
Temp.
Compensation for hall sensor
| Probe head build the Temp. sensor
for using the ATC ( automatic Temp. compensation ).
Field Direction| Uniaxial.
Datalogger Sampling Time Setting range| Auto| 1 sec to 8 hour 59 min. 59 sec.
@ Sampling time can set to 1 second, but memory data may loss.
---|---|---
Manual| Push the data logger button once will save data one time. @ Set the
sampling time to
0 second.
@ Manual mode, can also select the 1 to 99 position ( Location ) no.
Memory Card| SD memory card. 1 GB to 16 GB.
Advanced setting| * SD memory card Format
* Set clock time ( Year/Month/Date, Hour/Minute/ Second )
* Set sampling time
* Auto power OFF management
* Set beep Sound ON/OFF
* Decimal point of SD card setting
* Unit setting
Data Hold| Freeze the display reading.
Memory Recall| Maximum & Minimum value.
Sampling Time
of Display
| Approx. 1 second.
Data Output| RS 232/USB PC computer interface.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
* Connect the optional USB cable USB-01 will get the USB plug.
Operating
Temperature
| 0 to 50 ℃.
Operating
Humidity
| Less than 85% R.H.
Power Supply| * Alkaline or heavy duty DC 1.5 V battery
( UM3, AA ) x 6 PCs, or equivalent.
* DC 9V adapter input. ( AC/DC power
adapter is optional ).
Power Current| Normal operation ( w/o SD card save data and LCD Backlight is OFF) :
Approx. DC 14 mA.
When SD card save the data and LCD Backlight is OFF) :
Approx. DC 37 mA.
* If LCD backlight on, the power consumption will increase approx. 12 mA.
Weight| 489 g/1.08 LB.
Dimension| Meter| 177 x 68 x 45 mm
(7.0 x 2.7x 1.9 inch)
Probe| 198 x 25 x 19 mm
( 7.8 x 1.0 x 0.7 inch ).
Accessories Included| * Instruction manual…………………… 1 PC
* Magnetic Probe……………………….. 1 PC
* Hard carrying case ( CA-06 )……….. 1 PC
Optional Accessories| * 1.413 mS Conductivity Standard
Solution………………………….. CD-14
SD memory card ( 2 GB ) AC to DC 9V adapter.
USB cable, USB-01. RS232 cable, UPCB-02.
Data Acquisition software, SW-U801-WIN. Excel data Acquisition software, SE-E802.
Appearance and specifications listed in this brochure are subject to change without notice
PATENT
- CHINA : ZL 2008 2 0189918.5 ZL 2008 2 0189917.0
- TAIWAN : M 358970 M 359043
- Germany: Nr. 20 2008 016 337.4
- JAPAN : 3151214 U.S.A. : Pending
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>