Govee H61C5 RGBIC Neon Rope Lights for Desks User Guide

Govee H61C5 RGBIC Neon Rope Lights for Desks

Quick Start Guide

In The Box

Installing Your Device

Before You Install

1. Step1
   Unpack the box and check for all included items.

2. Step2
   Plug the neon rope light Into power and check if it lights up.
   Please follow the steps below if you want to fix the rope light to the desk edges snugly:

3. Step1
   Power the rope light off. Compare the rope light to the desk edges and determine the final length you
   want.

4. Step2
   Flip the light over and ftnd the cuttable position that is closest to and does not surpass the end. Carefully cut along the indicator line with scissors.

5. Step3
   Put the end cap onto the end of the rope light. Power on and check if it lights up.

Please calibrate the length of the light when connecting it to the app.

Installation Steps

1. Step1
   Wipe the surface to make sure it’s clean and dry.

2. Step2
   If your desk is L-shaped (or has an internal angle), please stick the internal angle cover to the corner first. Firmly press the internal angle cover for 1 Os to make sure it snugly sticks to the corner.

3. Step3
   Peel off the protective film and carefully stick the rope light to the edges little by little. Firmly press the rope light for 1 Os, especially at the corner, to make sure it snugly sticks to the edges.

4. Step4
   Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effects.

5. Step 5
   Power on the neon rope light and start using.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>