HOOKE ROAD BXG.2080-S Front Fender Flares Instruction Manual
- June 16, 2024
- HOOKE ROAD
Table of Contents
MAKE A DIFFERENCE
Front Fender Flares
BXG.2080-S
Contents:
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 10 | Button Head Socket Cap Bolts Screws | M8*25 | |
| 10 | Flat Washer | M8201.5 | |
| 8 | Flange Hex Lock Nuts | M8 | |
| 2 | Nut Plate | M8 | |
| 6 | Wire Clips | ||
| 6 | Double-sided tape | ||
| 6 | Wire Clips | ||
| 6 | Cable Zip Ties | 
6| Wire| |
Tools required:
a. Drive Socket Ratchet Wrench;
b. 5mm Hex Bit Socket;
c. 13mm Wrench;
Installation time:
About 1.5 hours, 1-2 people may be needed. Installation time may differ
ccording to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.2080-S), please scan the QR code.
https://drive.google.com/drive/folders/1hpJxgLwwjKsELFG5qt1x_w7hD- gdPbjE?usp=sharing
Installation instruction:
Step 1: Remove the factory front fender flares, ready to install our front fender flares.
Step 2: First, Lift up the fender flares and install the two holes in the left
side.
Use the M8*20 Button Head Socket Cap Bolts Screws groups, but don’t tighten up
those bolts.
Step 3: And then, to install the two holes in the right side. Use the M8*20 Button Head Socket Cap Bolts Screws groups, need put the nut plate in the back of the most right side hole. but don’t tighten up those bolts.
Step 4: Finally, to install the middle hole. Use the M8*20 Button Head Socket Cap Bolts Screws groups. Tighten up all of bolts at the same time.
Lighting Wiring Installation:
Turn lamp: Disconnect the power source first, then unplug the original vehicle’s turn signal light wiring harness, and connect the harness from the product to the original vehicle’s wiring harness. Ensure a secure and stable connection of the wiring harness, and wrap it with electrical tape. (Yellow Wire- White Wire, Black Wire – Black Wire)
DRL light: Disconnect the power source first,, and considering that the original vehicle lacks DRL light functionality, it is necessary to extend the wiring harness with a yellow wire. Additionally, use a small and long object to assist in threading the harness through the vehicle’s body to ultimately connect it to the ACC terminal inside the fuse box.
Step 5:
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4xé
With The Hashtag #hookeroad If You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>