suptek S42 Free Remote Holder Installation Guide

suptek S42 Free Remote Holder

Product Information

Specifications

• Product Name: S42 Free Remote Holder

• Compatibility: Suitable for smooth tile surfaces, glass, wooden
  doors, stainless steel surfaces, and fine-lined surfaces

• Installation Options: Hole installation, Cement wall
  installation, Seamless installation, Wooden wall installation

Product Usage Instructions

Hole Installation

1. Ensure the wall is clean and free from dust.
2. Mark the desired location for the remote holder on the wall.
3. Drill three holes with a diameter of 3mm at the marked locations.
4. Insert the supplied parts into the holes. The parts should fit snugly.

Cement Wall Installation

1. Ensure the wall is clean and free from dust.
2. Apply a suitable adhesive to the back of the remote holder.
3. Press the remote holder firmly against the cement wall for a few seconds to ensure proper adhesion.

Seamless Installation

1. Ensure the wall is clean and free from dust.
2. Peel off one side of the adhesive strip and stick it to the three grooved holes on the back of the remote holder.
3. Peel off the other side of the adhesive strip and carefully press the remote holder against the wall at the desired location.
4. Smooth out any air bubbles and firmly press the remote holder against the wall for better adhesion.
5. Leave the remote holder undisturbed for 24 hours to allow the adhesive to set properly.

Wooden Wall Installation

1. Ensure the wall is clean and free from dust.
2. Apply a suitable adhesive to the back of the remote holder.
3. Press the remote holder firmly against the wooden wall for a few seconds to ensure proper adhesion.

FAQ

• Q: What surfaces can I use the S42 Free Remote Holder on?
• A: The S42 Free Remote Holder can be used on smooth tile surfaces, glass, wooden doors, stainless steel surfaces, and fine-lined surfaces.
• Q: Can I install the remote holder on a cement wall?
• A: Yes, you can install the remote holder on a cement wall. Simply apply a suitable adhesive to the back of the remote holder and press it firmly against the wall.
• Q: How long should I wait after installation before hanging remotes on the holder?
• A: For better results, it is recommended to hang remotes on the holder after 24 hours of installation.
• Q: Can I use the remote holder for delicate or expensive items?
• A: It is not recommended to use the remote holder for valuable and fragile items.

Supplied parts list

• (A)Holder×2
• (B)Punched cardboard×1
• (C)S5*50 Self-drilling screw×6
• (D)Φ8Plastic anchors×6
• (E)Adhesive strips×6

Hole installation

Seamless installation

Precautions before installation

1. It can be used on smooth tile surfaces, glass, wooden doors, stainless steel surfaces, and fine-lined surfaces. Make sure that there is no dust on the wall before use.
2. Please be cautious when painting walls and wallpaper. Adhesive strips are too sticky and will bring the wall skin off when they are torn off. Not suitable for walls that tend to fall off.
3. After applying it, wipe out the air gently, and hang it up after 24 hours for better results.
4. Do not use it for valuable and fragile items.
   • Tear off one side of the adhesive strip and stick it to the 3 grooved holes as shown in the picture.
   • Tear off the other side of the tape and paste it on the wall.

Precautions

1. Do not use the remote holder on walls that tend to fall off or are not suitable for adhesive use.
2. Exercise caution when painting walls or applying wallpaper, as the adhesive strips may cause damage if forcefully removed.
3. Avoid using the remote holder for valuable or fragile items.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>