HOOKE ROAD BXG.2030-S Trail Rear Bumper Installation Guide
- June 16, 2024
- HOOKE ROAD
Table of Contents
**HOOKE ROAD BXG.2030-S Trail Rear Bumper Installation Guide
**
Contents
| Qty | Part Name | Size(mm) |
|---|---|---|
| 1 | Rear Bumper | |
| 4 | Hex Bolt | M12*110 |
| 4 | Hex Bolt | M12*3 |
| 8 | Split Lock Washer | D12 |
| 4 | Hex Nut | M12 |
| 12 | Flat Washer | M12230 |
Tools required
19mm Wrench；
19mm Socket wrench
Installation time
About 1 hour, 2-3 people may be needed. Installationtimemaydifferaccording to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT ANDREADINSTRUCTIONSCAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2030-S), please scan the QR code.
Installation instruction
Step 1:
Before install the new bumper. Remove the original rear bumper first.
Step 2:
Put the Nut Plate Brackets into the vehicle.
Step 3:
(1)Install the Mounting Plate with the Hex Bolt (M12110), SplitLockWasher
(D12), Flat Washer (M122*30), Hex Nuts (M12).
Install the rear bumper with the Hex Bolt (M1235), Split LockWasher (D12),
Flat Washer (M122*30). The bottomsight.
Step 4
Tighten the Hex Bolt (M1235) & the Hex Bolt (M12110) by19mmwrench or socket
wrench.
Step 5:
Install the D-rings.
Step 6：
Installation completed
Attention
- 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>