brennenstuhl EDL BLUPD30 0919 DE Table Power Strip Instruction Manual
- June 16, 2024
- brennenstuhl
Table of Contents
Instruction Manual
Function and instructions for use
Warnings:
- Do not connect in series!
- De-energized only when disconnected!
- Do not cover during operation!
- Only use in dry rooms!
- Always place the product so that the socket is easily accessible and you can easily reach the main plug!
- When touching damaged, open or live parts, there is the risk of electric shock!
Overvoltage protection:
The overvoltage protection device prevents damage to electric appliances
connected to the product caused by voltage peaks. For correct function, the
product has to be connected to a socket with professionally installed
protective conductor. In case of direct lightning strike, absolutely safe
protection of the connected electric appliances cannot be guaranteed due to
the extremely high energy that occurs. The highest overvoltage protection
possible is provided by a multi-stage overvoltage protection concept
consisting of coarse/middle protection (installation technology) together with
our fine protection according to EN 61643-11 type 3.
“Protection on” functional display:
Overvoltage protection available
Product ready for operation.
Overvoltage protection used up
Product must be exchanged.
Acoustic warning signal “accoustic alarm”:
When the overvoltage protection is exhausted, an additional acoustic warning
signal sounds ( Function display „Protection on“).
Insurance protection for connected devices
Brennenstuhl guarantees the overvoltage protection properties up to the
technical data specified on the name plate of the relevant product. If the
products have been used properly, Brennenstuhl will take over the repair
and/or the replacement of all electric appliances directly connected to the
overvoltage protection product which have verifiably been damaged by
overvoltage, if the following applies: The damage must be attributable to the
fact that the described protective function according to the technical data
was not provided. For this case, there is insurance protection for personal
and property damage within the scope of our product liability up to 5 million
euros.
Maintenance and cleaning
The product is maintenance-free. Clean the product with a dry cloth.
Dispose of electric appliances in an environmentally friendly manner! Electric
appliances must not be disposed of in hou- sehold waste. The European
Directive 2012/19/EU on Waste Electrical and Electronic Equipment rules that
used electric appliances should be collected separately and recycled in an
environmentally friendly manner. For possibilities of disposal of the used
appliance, please contact your local or municipal administration.
EU declaration of conformity
**** The declaration of conformity is deposited with the manufacturer.
UK declaration of conformity
**** The declaration of conformity is deposited with the manufacturer.
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 · CH-6340 Baar
Brennenstuhl UK Ltd.
No 1 Royal Exchange ∙ London EC3V 3DG, UK
www.brennenstuhl.com
Documents / Resources
|
brennenstuhl EDL BLUPD30 0919 DE Table Power
Strip
[pdf] Instruction Manual
EDL BLUPD30 0919 DE Table Power Strip, EDL BLUPD30 0919 DE, Table Power Strip,
Power Strip, Strip
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>