BEA Eagle Artek Ceiling Accessory Installation Guide
- June 16, 2024
- BEA
Table of Contents
EAGLE ARTEK
CEILING ACCESSORY
Eagle Artek Ceiling Accessory
DIMENSIONS
INSTALLATION
Place the mounting template in the desired mounting location and make the
appropriate cuts.
Route and connect the harness to the sensor,
and then secure the sensor in the ceiling accessory.
Connect the EAGLE ARTEK harness to the ceiling accessory.
Secure the ceiling accessory to the ceiling using the provided
screws and wingnuts.
Make the appropriate radar adjustments to
create the desired field shape and position. Tilt angle should be 70° for
optimal performance.
Snap the Ceiling Accessory cover to the
Ceiling Accessory housing.
BEA, INC. INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS
BEA, Inc., the sensor manufacturer, cannot be held responsible for incorrect
installations or incorrect adjustments of the sensor/device; therefore, BEA,
Inc. does not guarantee any use of the sensor/device outside of its intended
purpose.
BEA, Inc. strongly recommends that installation and service technicians be
AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/gates, and
factory-trained for the type of door/gate system.
Installers and service personnel are responsible for executing a risk
assessment following each installation/service performed, ensuring that the
sensor/device system performance is compliant with local, national, and
international regulations, codes, and standards.
Once installation or service work is complete, a safety inspection of the
door/gate shall be performed per the door/gate manufacturer’s recommendations
and/or per AAADM/ANSI/DASMA guidelines (where applicable) for best industry
practices. Safety inspections must be performed during each service call –
examples of these safety inspections can be found on an AAADM safety
information label (e.g. ANSI/DASMA 102, ANSI/DASMA 107, UL294, UL325, and
International Building Code).
Verify that all appropriate industry signage, warning labels, and placards are
in place.
Visit website for available languages of this
document.https://www.qrfy.com/2gnGW__b5D
©BEA |
Original Instructions
75.0075.01 EACA 20231018
Tech Support & Customer Service:
1-800-523-2462
General Tech Questions: [email protected]
Tech Docs: www.BEAsensors.com