BEA LZR-SIGMA Laser Complete People Counting Solution User Guide

LZR-SIGMA Laser Complete People Counting Solution

SENSORIO.COM
LZR® -SIGMA’s online device and user management portal

INTRODUCTION

The purpose of this tutorial is to provide COMPANY ADMINISTRATORS and DEVICE MANAGERS with an overview of the online device and user management portal for LZR® -SIGMA.

LOGIN SCREEN

Only users with Company Administrator and Device Manager level access have access to the portal.

Any user with Installer and Enduser level access will receive a prompt to use the LZR®-SIGMA mobile app. Any user assigned “No Access” will receive a “No access” message.

HOME PAGE

ACCESS TYPES:

• Company Administrator
• Device Manager

1. Device management tab
2. Users management tab
3. API management tab
4. Search/Filter bar| 5. Click for user information.
6. Click for your integrator company’s information.
7. General search
8. Sidebar tools appear here.
---|---

DEVICES TAB

This page displays all LZR-SIGMA devices assigned to your Integrator account.

DEVICE INFORMATION
These sidebar tabs are used to customize device information.  You may select one or more devices to be customized simultaneously.

1. MODIFY MULTIPLE DEVICES: Selecting the device(s) will allow access to the sidebar tools, allowing you to modify several at once.
2. MODIFY A SINGLE DEVICE: Click on the device’s ID to modify existing information (see page 10).
3. end-user information
4. installation location information
5. data push setup for transferring data via FTP or SFTP
6. erases device or multiple devices
7. clears the height, left/right limits, and all device location information
8. clears height and left/right limits
9. exports sensor data
10. status of selected devices

DEVICE INFORMATION – Define Company
Company = name of end user’s company or organization

DEVICE INFORMATION – Define Site

DEVICE INFORMATION – Define Data Push Agent
A data push agent is used to push data from SIGMA via FTP, SFTP, or HTTP POST methods.  The max frequency for a data push is 1 minute.  SIGMA also supports two other data transfer methods, via REST API and Live Count mode.

DEVICE INFORMATION – Individual Device
If an individual device was chosen from the “DEVICE ID” column (see page 6), the following screen will appear.

Manage Device Location
information specific to the installation location
DEVICE INFORMATION – Individual Device
Manage Device these screenshots show device settings for data push and live to count

1. Data Push Agent – by clicking the + button, the user can create a data push agent

2. Live Counting Agent – used to send data from a sensor in near-real time, directly to an HTTP(s) endpoint URL.
   Note: Enabling live count mode for a sensor connected via cellular will increase monthly data charges. Contact your supplier for more information.

3. Protocol & format – see information pane

4. Live counting name – designate a title for your live counting

5. HTTP(S) URL – the destination for your data

6. Username / Password – specific to your data push agent, not the same as your Sensorio account credentials

DEVICE INFORMATION – Individual Device
The screenshot below shows device actions and device settings for network, counting proofs, and snapshots

1. Actions:
   • Retrieve sensor’s status – get the current connection status and software version
   • Reboot – shut down and restart the sensor (does not reset any settings)
   • Partial Reset – clears device location settings
   • Factory Reset – clears and restores settings to factory default settings; integrator information remains the same

2. Set Network Settings – local network settings for device (enable/disable DHCP, change IP address, subnet and gateway)

3. Set Counting Proof – information for the period of time that a counting proof will be conducted

4. Take A Snapshot – the sensor takes a picture and overlays a red counting line.  This can be used for checking the location of the counting line, investigating the sensor’s environment, or simply verifying that the sensor is online.

USERS TAB

This page displays all users associated with your Integrator account.
Those users with Device Manager access levels have ”read-only” access to information in this tab and are, therefore, unable to add new users or modify existing users.

USER INFORMATION
These sidebar tabs are used to customize user information.  You may select one or more users to be customized simultaneously.

1. Selecting a user(s) will allow access to the sidebar tools.
2. Click on the user’s name to modify existing information specific to that user.
3. Delete a user.
4. Change access level permission.
5. Add a new user (see pages 16 – 20).

USER INFORMATION – Add User (User Type)

There are three available User Types:

1. Integrator – your company
   Note: “Company” info will auto-populate.

2. Installer – 3rd party/partner installation company
   Note: “Company” may be selected from a drop-down list of previously entered companies, or information must be added (see screenshots below).

3. Client – end user
   Note: “Company” may be selected from a drop-down list of previously entered companies, or information must be added (see screenshots below).

USER INFORMATION – Add User (Access)
CAUTION: Be mindful in choosing access levels. Risks of varying degrees are associated with each level (see risk chart below descriptions). By assigning a user Company Administrator or Device Manager access permission, you are allowing that user to view, modify, or delete ALL devices, clients, and/or users associated with your integrator company.

Company Administrator – The user has full access to the mobile app and online portal, including the ability to manage users within the company
Device Manager – User has full mobile app and online portal access, excluding user management
Installer – The user has full access to the mobile app, allowing them to install new sensors and change sensor settings, as well as conduct counting proofs
Enduser – The user has access to the mobile app for counting proofs only

ACCESS PERMISSION RISK LEVELS

| ACCESS PERMISSION
---|---
Company
Administrator| Device
Manager| Installer| Enduser| No Access
USER TYPE| Integrator| none| none| none| low| high
Installer| high| high| none| none| none
Client| high| high| high| none| none

USER INFORMATION – Add User (Email Confirmation)
Once a new user has been added, that user will receive a confirmation email.

The new user must click on “Set password” to take them to the portal to create a password for their account.

After creating a password (a), the user will receive the following action depending on their access level permission:

• Those with Company Administrator or Device Manager level access permission will be taken to the home page.
• Those with Installer or Enduser level access permission will receive a prompt directing them to the app (below, left).
• Those with No Access will receive a prompt reminding them that they do not have access to the portal (below, right).

USER INFORMATION – Change Access

This example shows a change in access level permission from Device Manager to No Access.
USER INFORMATION – Delete User

EXTERNAL DATA ACCESS (API) TAB

1. Add a Key
   Create a new API key. Each key can be configured to receive data for one or more companies managed by your integrator account.

2. Delete Key
   Remove a previously assigned key

3. Documentation
   Information for API request and response formats

©BEA | Original Instructions
75.5934.01 SENSORIO.COM TUTORIAL 20210630

Documents / Resources

| BEA LZR-SIGMA Laser Complete People Counting Solution [pdf] User Guide
LZR-SIGMA, Laser Complete People Counting Solution, LZR-SIGMA Laser Complete People Counting Solution
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>