DDPAI Ranger Pioneering Riding Camera User Manual
- June 16, 2024
- DDPAI
Table of Contents
Ranger Pioneering Riding Camera
User Manual
Meeting Your DRC01
RANGER DRC01 Ridecam, which can generate 4K 30Fps/2K 60Fps/1080P 90Fps high- definition video, with DIS intelligent antishake algorithm, enable stable picture and videos in various scenes. The camera is designed with a touchscreen, which is convenient for interactive operation, playback and downloading video. Equipped with sensors such as magnetometer and barometer, the camera supports riding mode to present a variety of bicycle/motorcycle rider data. This camera comes with IP67 dust and water proof, and can be used with various riding accessories.
Operation Instructions
- Button Function
| Button | Function |
|---|---|
| Power Button | • Hold 1s to power on the device |
• Quick press to return to main interface
• Hold 2s to power off the device
• Hold 10s to force shutdown
Let Button| • Quick press to take a photo/short video
• Hold 2s to start/end recording
Right Button| • Quick press to switch the data interface
• Hold 2s to start/pause the riding mode
• After pausing, quick press to continue recording and
close the pop-up window
• After pausing, hold 2s to end the riding mode
Indicator Guide
| Indicator | System Status |
|---|---|
| Breathing Green | Power On (Not Recording) |
| Steady Green | Recording |
| Flashes Green | Upgrading |
| Flashes Yellow | Abnormal Storage / High Temperature |
| Flashes Purple | Taking Pictures / Short Videos |
| Steady Purple | USB Transfer Mode |
| Steady Red | Moment of Power On |
- Touchscreen Guide
Swipe Right: Enter Album
Swipe Let: Enter Data Interface
Swipe Up: Enter Setings Interface
- Bracket Installation
Charging Type-C and Wireless Transmission
Specifications
| Product Name | Ridecam |
|---|---|
| Product Model | DDPAI RANGER |
| Battery Capacity | 1600mAh |
| Dimensions | 514874mm |
| Input | 5V 2.5A |
Package Contents
APP Instructions
Please scan the QR code below or search for “DDPAI” in Google Play Store (Android) or App Store (iOS) to download the DDPAI App.
Safety Instructions
Cleaning
- When there are foreign objects on the lens protection cover, it is recommended to clean it with clean water or use tools such as lens pens, lens air blowers, and lens cloths to clean it. Make sure the camera is dry when replacing the protective lens cap. After the device is out of the water, it needs to be dried to avoid fogging caused by the water in the gap entering the lens protection cover. Do not disassemble the lens protection cover frequently, so as to avoid dust entering the lens cover during disassembly and assembly, which will affect the shooting quality.
- When there are foreign objects on the lens, use lens pen, lens air blower, lens cloth and other tools to clean them.
- If there are foreign objects in the cover of the data power supply, please clean them with a dry, soft cloth or paper or air blower.
- Pay attention to dust and sand in the quick-release base, otherwise it will affect assembly stability of the device.
Warnings
-
The device contains strong magnetism. To avoid the effect of magnetization, please keep away from magnetic cards, IC cards, implanted medical devices (such as pacemakers), hard drives, AM chips and other vulnerable devices.
-
The built-in waterproof membrane of the sound pickup hole and the air pressure balance hole of the device is specially designed for waterproofing. Do not remove the printing by yourself or use sharp objects to damage it, otherwise the waterproof protection will be lost. After using in water, please use a soft clean cloth to clean the moisture and foreign matter on the device in time.
-
When there is water or dirt on the surface of the extension interface of the device, it must be wiped clean before connecting power supply accessories and other operations. Otherwise it will stop working or cause corrosion.
-
Do not dry the device with a hair dryer, otherwise the microphone membrane and the built-in breathable membrane will rupture and water will enter.
-
If the product catches fire, please immediately use water, spray, sand, fire blanket, powder, carbon dioxide fire extinguisher to extinguish the fire. Please select the fire extinguishing method from above according to the actual situation.
-
Please use the product in an environment where the temperature is between -20°C and 45°C.
-
The charging environment temperature of the product is S*C to 40°C. To optimize the life of the built-in battery, charging will be suspended when the temperature limit is reached in the power-on state, and it is recommended to charge in the power-off
tate. -
Do not disassemble the product in any way. If the battery is pierced during disassembly, the electrolyte inside the battery will leak, and even cause fire andexplosion. Do not mechanically strike, crush or throw the product. Do not place heavy objects on the product.
-
Do not heat the product. Do not place the product in microwave or pressurecooker.
-
1t is forbidden to place the product near a heat source {stove or heater, etc.} and to place the product in a car on a hot day. Do not store the product at temperatures above 60°C.
-
Do not store the battery for a long time after it has been fully discharged to avoid battery damage caused by over-discharge. Otherwise, the device will no longer function properly.
Notes
- Falling from a high place or being subjected to excessive external impact may damage the device and cause abnormal operation.
- Make sure the lens protection glass is clean. Foreign matter may scratch the lens protection glass and cause image quality damage. It is recommended to clean the device with a soft dry cloth.
- If the lens protection glass is accidentally damaged, please handle it carefully to avoid injury.
- When using the device, please keep it away from dust and sand. If the sound pickup hole of the device is blacked by foreign matter such as sand and dust, please wash it with water.
- Do nat use sharp objects to poke the USB-C interface, pickup holes, and speakers.
- Do not place the device in extreme cold or heat. Low or high-temperature conditions may shorten battery life or cause temporary malfunction.
- Do not use the device in thunderstorm weather.
- Do not disassemble and repair the device by yourself.
- Do nat use the device in hot springs, corrosive liquids. It is not recommended to use the device in extreme water environment, or unknown liquid environment.
- When the device is fixed outside the vehicle, if the speed of the vehicle is too fast, there are impurities on the surface of the vehicle, or in strong winds or rainstorms, the fixing of the device will be affected, resulting in falling.
- Do not use the device underwater.
- If the battery is low, please charge it in time. Long-term (more than 4 months) low battery storage will affect the service life of the battery.
- If the device is not used for more than 10 days, please charge or discharge the battery to 40%-60% for storage, which can prolong the service life of the battery.
- The use distance of the human body is more than 15mm.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed toprovide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may Cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2AJFX-RANGER
Contact Us
Manufacturer: DDPAI (Shenzhen) Technology Co., Ltd.
E-mail: feedback@ddpai.com
Website: www.ddpai.com
Address: 28F, Building 8A, International Innovation Valley, Nanshan District,
Shenzhen City, Guangdong Province
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>