cudy LT18 WiFi 6 4G Cat18 Router User Manual

June 4, 2024
cudy

cudy LT18 WiFi 6 4G Cat18 Router

cudy LT18 WiFi 6 4G Cat18 Router-fig1

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Install the SIM Card and Battery

  1. Install the cellular antennas

  2. Insert the Nano SIM card into the SIM1 slot until you hear a click.
    Direction: With the gold contacts facing down, gently slide the SIM card into the slot.
    Note: If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since this automatic selection mechanism is time-consuming, it is strongly recommended that only one card is inserted for the first use.

  3. Connect the power adapter to the router.cudy LT18 WiFi 6 4G Cat18 Router-fig4

  4. Turn on the router. Waiting 2-5 minutes for it to start.

  5. Check the status of the LED

    • If the LED turns to solid blue, means connect to cellular network and signal is strong.
    • If the LED turns to solid purple, means connect to cellular network and signal is average.
    • If the LED turns to solid red, please follow the instructions of Customize the 4G Router.
      Note:
      For some ISPs a SIM card (such as version), it may take longer to connect to the internet. Please kindly wait another 2-5 minutes.

Customize The 4G Router

  1. Connect the router via ethernet cable or Wi-Fi. Network name and password is printed on the bottom of the router.cudy LT18 WiFi 6 4G Cat18 Router-fig8
  2. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1) in the address bar, use admin as password to login.cudy LT18 WiFi 6 4G Cat18 Router-fig9
  3. Below page would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the internet.cudy LT18 WiFi 6 4G Cat18 Router-fig10
  4. Then please check 4G information card of the status page. If the status is connected,means connected to the internet successfully.cudy LT18 WiFi 6 4G Cat18 Router-fig11
  5. If 4G is not connected, or if you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.cudy LT18 WiFi 6 4G Cat18 Router-fig12

Note:

  1. If you are not sure about APN parameters, please contact your internet provider.
  2. If you meet any other problems don’t hesitate to contact our technical support team: support@cudy.com
  3. Frequently Asked Questions: Find answers on https://www.cudy.com/faq
    Enjoy the internet!

LED and Interface

Name Status Indication
Off Not powered on
**** Flash System starts up process or upgrade process
Solid System starts up is complete
Off Not powered on
**** Red No internet connection
Purple 2G/3G connected
Blue 4G connected
Blinking Blue Wi-Fi is disabled
Flash WPS pairing
Solid Wi-Fi is enabled
Off Not detect the SIM card.
**** Red Not connected to 4G network.
Purple 4G LTE signal is average
Blue 4G LTE signal is strong
LAN LED Off No connection
On Connected
Power Press for “Power ON”, bounce for “Power PFF”
Button WPS Press to take effect.
Reset Long press for 2s to take effect without releasing it. When it

takes effect, all LED lights flash 3 times, and then

enter the restart process.

How to upgrade firmware

How to upgrade firmware?

  1. Download the latest firmware from https://www.cudy.com/download
  2. Unzip the file you download
  3. Connect to Cudys network via WiFi or Ethernet.
  4. Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
  5. Log in the web management page.
  6. Click Advanced -> Firmware.cudy LT18 WiFi 6 4G Cat18 Router-fig17
  7. Choose the firmware you unzipped to upload.cudy LT18 WiFi 6 4G Cat18 Router-fig18
  8. Waiting 2 5 minutes for the router restart.
  9. Done

Need Help?

  • Q1. What should I do if I cannot access the web management page?
    • A1: If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
    • A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the web browser.
    • A3: Use another web browser and try again.
    • A4: Reboot your router and try again.
    • A5: Disable and enable the active network adapter in use.
  • Q2. How do I restore the router to its factory default settings?
    • A1: With the router powered on, press, and hold the RESET button for 6 seconds before release. Wait the router resets.
    • A2: Log in to the web management page of the router, and go to Advanced settings > Reset, click Perform Reset and wait until the reset process is complete.
  • Q3: What can I do if I meet other problems?

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s. Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440

Subject of the declaration:
Title: 4G LTE Wi-Fi Router
Model / Type: Cudy-LT18

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

  • Directive No. 2014/53/EU
  • Directive No. 2009/125/EC
  • Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals