VEVOR RV-30A RV Power Outlet Box Installation Guide
- June 16, 2024
- VEVOR
Table of Contents
Power Outlet Box
RV-30A
Installation Guide
RV-30A RV Power Outlet Box
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
****CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the
product shall be subject to the product you received. Please forgive us that
we won’t inform you again if there is any technology or software updates on
our product.
Installation Instructions
Power Outlet Box
Sku#: DGNRV30ATT30RA943V0
Model: RV-30A
Desc: AC 30A 125/250V
NEMA: XD-010(TT-30R)
WARNINGI: ELECTRICAL SHOCK AND FIRE HAZARD！
The outlet is not to be connected to power prior to installation. Failure to
comply with this instruction could result in an electrical failure, fire and
electrocution.
IMPORTANT: Installation of this power outlet box and related wiring must be done by a qualified electrician in compliance with all applicable electrical codes, When being used to power a structure, this outlet must be used in conjunction with a transfer switch, Not for indoor use, When using an engine driven generator, locate away from doors and windows to avoid the build-up of carbon monoxide from the engine exhaust in enclosed areas.
Installing the Power Outlet Box：
Mount the power outlet box on the outside of the building in a convenient
location, using the three holes provided in the back of the cabinet, Using
copper wire only and approved wiring methods, run the wiring through one of
the knockouts in the cabinet to a junction box located near the transfer
switch. If using conduit, pull at least four colors.
WireGauge: 6AWG~10AWG. Strip the wire insulation 3/5″(15mm,FIG1) (do not
tin conductors) and connect the wires in the power outlet box are as follows.
Making sure there is no wire insulation in any terminal ancthe outlet terminal
screws are tightened to 35 inch-pounds torque using Electric flat Screwdriver.
Cable Color Scheme：
Black/Red=Load (250 Vlot),the terminals marked “Black”
White=W-Neutral Conductor connected to “White”marking terminal”
Green=Green power inlet wire to green ground screw terminal on inside of
cabinet.
If required, green wire to green ground screw terminal on inside of
cabinet.(FIG2)
Enter installation considerations:
Choose one threading hole that suits you the best. (A,B,C,or D)
Technical Support and E-Warranty Certificatewww.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
Made In China
Documents / Resources
|
VEVOR RV-30A RV Power Outlet
Box
[pdf] Installation Guide
RV-30A, RV-30A RV Power Outlet Box, RV Power Outlet Box, Power Outlet Box,
Outlet Box, Box
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>