Welland T9 Smart Body Fat Scale Instruction Manual

Smart Body fat scale
Instruction Manual

Scan the corresponding QR Code to download APP

http://www.fitfeel.cn/onfit/

Thanks for choosing the Smart body Scale. This full-body composition scale can help you conveniently measure body weight, Body balance, BMI, Body fat rate, Visceral fat, Body water, Skeletal muscle rate, Muscle mass, bone mass, Protein, BMR, Body age, Heart rate, Heart Index and etc;

IMPORTANT: Please read the instructions in this manual carefully before using the device. Failure to comply with the instructions given in the manual or using this scale in ways other than the ones mentioned in this manual may result in injury to yourself or damage to the scale.

(Outfit APP functions)

Weight
Muscle weight
Body age
Protein rate
Heart rate| Body fat
Bone mass
Muscle
Subcutaneous fat
Heart Index| Visceral fat
Moisture
Standard weight
Temperature| Protein amount
BME
Without fat
Height record (<16 years old)| BMI
Degree of obesity
BFR
---|---|---|---|---

INDICATION SYMBOLS

them again to repeat the measuring process.

WHAT’S IN THE PACKAGE

1 X Smart body fat scale
3 X AAA batteries
1 X User manual

WARNING

• DO NOT use with medical implants such as pacemakers.
• DO NOT stand on the edge of the scale or jump on it;
• DO NOT overload the scale(Max.180kg)
• DO NOT drop scale or droop objects on it as this may damage the sensors.
• DO NOT immerse the scale in water or use chemical cleaning agents. Clean the scale with a slightly damp cloth.
• Not recommended for pregnant women.
• Not recommended for infants, toddlers, and children under 10 years of age.
• Any measurement obtained using this device is for reference only and should not be considered as a medical opinion.
• Consult your primary care doctor or physician before making changes to your diet, exercise plan, or physical activities.
• Always place the scale on a hard, dry, and flat surface before measurement.
• Make sure your feet are dry before stepping on the scale.
• Connect the batteries in accordance with the correct polarities indicated.
• Remove batteries if the scale is not used for a prolonged period of time.

SPECIFICATION

Product size: 290x290x20mm
Weight unit:kg
Weight limit: 6kg-180kg
Power Supply: 3xAAA batteries
Account number: No limitation (each account can add 24 persons)
Baby mode: Allow you to scale the weight of the baby
Height record: Allow you to record the height info under 16 years old
Operating temperature: 10-40 C
Operation humidity: 20%-90%

Support Devices:
iOS 8.0 or higher
Android 6.0 or higher

Install Unfit App

1. Seach “Unfit” in Apple Store or Google Play or scan the QR Code below:
   http://www.fitfeel.cn/onfit/

2. Download and install the App on your device.

3. The App icon will appear on your phone or tablet after the installation is completed.

HOW TO USE THE FIT DAYS APP

1. Insert 3xAAA batteries included in the package to the battery holder on the back at the back of the scale. Place the scale on the hard, flat ground.
   

2. Turn on the Bluetooth on your smartphone or tablet.

3. Register your own ID by email or social media account.
   

4. Add personal data and confirm OK;
   Note: Enter the wrong gender, age, height, or corporeal level may result in the measurement being inaccurate

5. Pair the scale through Bluetooth. Click  Device find the scale “Hologram” now your phone is connected to the scale;
   

6. Tap your foot on the scales to activate the display. Wait until the display shows “0.0”kg.

7. Step on the scale with BARE feet to turn the scale on.
   Note:
   If stepping on the scale with socks, only weight and BMI will be measured and displayed on the main page. To get complete data, please step on the scale with bare feet.

8. The number on the display is flashing when the scale is weighing and analyzing, keep standing still on the scale, till it finishes showing “0000”, and your phone has received all the data from the scale.

9. You can find the analysis report on Body Weight, BMI, BFR, Muscle, Bone Mass, etc. (see full details on page 1 RECORDED PARAMETERS). When you click a chart, you can see your long-term track chat form.

10. Add, switch users by click or click –> Manage users, then add personal data.
    The Smart Scale can recognize which user is stepping on it and remind the user to switch to the correct user. Each account can support 24users;
    

11. Weighing baby: slide –>Baby Mode. Step on the scale on your own, after scale gets your weight, and then hold the baby to get the weight of the baby.
    11. Select user with under age of 16, slide –>height to manual add the height record.

TROUBLESHOOTING GUIDE

1. Bluetooth not connected
   The scale and smartphone must both have Bluetooth on.
   For the Android version, you need to allow location permission for the APP;
   Need to open the APP during using the scale;
   The scale should be with the connection icon showing on the display;
   Check the iOS version of your smartphone, it must be iOS 8.0 or higher/Android 6.0 higher.
   Click —> Device—> + or —> Setting—> My device—> + to find the scale My_scale’.
   

2. Nobody fat data was measured when weighing
   The user must be barefoot to measure the body fat.
   Make sure your feet and the scale are both dry.
   The scale does not finish weighing when the number display is flashing (Keep standing on the scale for around 10 seconds until the number on the display stops flashing).
   Bluetooth is not turned on.
   Bluetooth is paired with a different scale.
   Try to add some water onto the feet bottom once the feet is too dry;
   When one scale be connected to more than 2 phone device, need to make sure the devices which are not for use be turn off first;

3. The scale is producing inconsistent weight.
   Check whether the scale is on a hard, flat surface.
   Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.
   Remove the batteries to restart the scale;

4. The App displays the incorrect fat-muscle ratio
   The body parameter setting is incorrect, check to make sure you entered the correct gender, height, and age.

5. How do I re-calibrate the scale after moving it or change the batteries?
   Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate.

6. The scale does not turn on
   Remove the batteries and put them back. Make sure to insert the batteries in the correct direction;

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>