myCharge MCS50K-b Magnetic Charger User Guide
- July 14, 2024
- myCharge
Table of Contents
myCharge MCS50K-b Magnetic Charger
Product Specifications
- Model: MCS50K-QSG
- Charging Port: USB-C
- LED Indicators: 4 solid non-blinking LEDs
- Charging Options: Wall outlet, car, computer
- Wireless Charging: Yes
- Safety: Prop65 Warning – Contains chemicals known to cause harm
- FCC Compliance: Compliant with FCC regulations
Product Usage Instructions
Recharging the Magnetic Charger
- Connect the included recharging cable to any USB power source.
- Choose one of the 3 ways to recharge: wall outlet, car, or computer.
- Wait for the unit to be fully charged which is indicated by 4 solid, non-blinking LEDs.
Using LED Indicators
To check the battery level, press the power button to see the corresponding
LED indicator.
Wireless Charging
You can place the device on a wireless charging surface for convenient
charging.
Safety and Warranty Information
For safety and environmental protection, please dispose of the product at
your local battery-recycling center.
- Warning: PROP65WARNING – This product contains chemicals known to cause cancer, birth defects, and other reproductive harm.
- FCC Compliance: User’s authority to operate the equipment is maintained with FCC compliance measures.
FAQs
-
Q: How do I know when the charger is fully charged?
A: The charger is fully charged when all 4 LEDs are solid and not blinking. -
Q: Can I use any USB power source to charge the device?
A: Yes, you can use any USB power source to recharge the magnetic charger.
MAGNETIC CHARGER QUICK START GUIDE
RECHARGING MAGNETIC CHARGER
Connect the included recharging cable to any USB power source. Fully
charged unit shows 4 solid, non-blinking LEDs.
3 ways to recharge
Wall outlet, car, computer
LED INDICATORS
CHARGING DEVICES
Pull out the USB-C cable and plug into device. Charging should begin
automatically – if it doesn’t, press the power button.
Charges 2 devices at once –
- 1 via wireless charging surface
- 1 via USB-C port
SAFETY AND WARRANTY INFORMATION
WARRANTY INFORMATION: At myCharge, we’re dedicated to making the highest
quality products possible. In that, we provide a one-year limited warranty
from the date of purchase. Keep a copy of your receipt as proof of purchase
and register your product at mycharge.com and check for
the latest product updates as they develop. Failure to register your product
and/or to provide proof of purchase may void the warranty.
Warranty Instructions and Information visit:
mycharge.com/warranty and select your model.
MYCHARGE SUPPORT : support.mycharge.com
WARNING: Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage, excess heat, toxic
fumes, fire or explosion, for which myCharge is not responsible.
- Do not expose Powerbank to heat sources, extended direct sunlight or other high-temperature environments.
- Do not expose Powerbank to extended low-temperature environments.
- Do not drop Powerbank and protect Powerbank from outside impact of any kind.
- Do not disassemble, attempt to repair or replace any part of the housing or Powerbank.
- Do not attempt to charge the Powerbank using any method, apparatus, or connectors other than those provided with the Powerbank.
- Never dispose of batteries in the garbage. This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center.
PROP 65 WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects and other reproductive harm.
FCC COMPLIANCE:
user’s authority to operate the equipment.
NOTE: This Powerbank has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This Powerbank generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : Changes or modifications not expressly approved by myCharge could
void the user’s authority to operate this equipment.
myCharge is a registered trademark of RFA Brands, LLC. ©2024 myCharge. All
Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>