suptek MC3260 Ceiling TV Mount User Manual
- June 16, 2024
- Suptek
Table of Contents
suptek MC3260 Ceiling TV Mount
Product Information
Specifications:
- Outer Pole: 1
- Pedestal: 1
- Screw Package 1: Included
- Junction Plate: 1
- Inner Pole Connector: 1
- Plate: 1
- A-M6*12 Semicircle Hexagon: 2
- B-M6 Nut: 2
- C-M4 Allen Key: 1
- D-M8*50 Outer Hexagonal Screw: 2
- E-M8204 Spacer: 4
- F-M8 Nut: 3
- G-8 Washer: 5
- H-M8*45: 1
- I-M8 Locking Nut: 2
- Screw Package 2:
- A-Plastic Anchors: 4
- B-Drilling Screw: 4
- C-8 Spacer: 4
- D-M8*25: 4
- E-M6*25: 4
- F-M5*25: 4
- G-M4*25: 4
- H-5 Washer: 4
- I-6 Washer: 4
Product Usage Instructions
Installation Steps:
-
Step 1: Assemble the Pedestal and Junction Plate
Take the Pedestal and Junction Plate components and follow the diagram to assemble them together. -
Step 2: Install the Wall Piece
Using Screw Package 2, attach the Pedestal to the wall by placing it against the wall, marking off the holes, and then drilling. Secure the Pedestal with self-drilling screws as shown in the diagram. -
Step 3: Connect the Inner Pole Connector and Outer Pole
Insert plastic anchors into each hole of the Outer Pole. Secure the Outer Pole to the Pedestal using self-drilling screws as shown in the diagram. -
Step 4: Connect the Plate and Junction Plate
Using Screw Package 1, connect the Plate and Junction Plate components together using the provided screws, washers, and nuts as shown in the diagram. -
Step 5: Install the Plate and Display
Using Screw Package 1 and/or Screw Package 2, attach the Plate to the assembled structure. The specific screws to be used depend on the desired configuration. Adjust the Plate up and down by unscrewing the plastic knob, positioning it to the desired height, and then tightening it again.
FAQ:
- Q: How often should I check if the screws are fixed?
- A: It is recommended to check if the screws are fixed every two months to ensure the stability and safety of the product.
For further assistance, please contact after-sales support at after- sales@suptekmount.com.
Technical Parameters
- Model No.: MC3260
- Display Size : up to 43”
- Maximum Load : 35kg/77.16lb
- Mounting Pattern : 200mmx200mm
- Tilt Range : 15°
- Profile : 540mm-780mm
Product Components
Screw Package 1
Screw Package 2
Installation Steps
-
The First Step: Pedestal And Outer Pole Connection(One way is for ±90°Front and rear adjustment; Another way is for 360°rotation adjustment; Customers can choose the way which is needed).
- The assembly of the Outer Pole and the Junction Plate is shown in the diagram. This way of connection is for ± 90° front and rear adjustment.
- The way of Connection 2: Insert the outer pole into the center hole of the pedestal as shown in the diagram. This way of connection is for 360°rotation adjustment.
-
The Second Step: Install the Wall Piece
- Place the pedestal against the wall, mark off the holes then drill.
- Insert plastic anchors into each hole, and secure the pedestal with a self-drilling screw as shown in the diagram.
-
The Third Step:
Connection of Inner Pole Connector and Outer Pole -
The Fourth Step:
Connection of Plate and Junction Plate -
The Fifth Step:
Install the Plate and Display
Please check the screws is fixed or not every two months .
We hope you never have the need, but if you do, our service is friendly and hassle-free. : after-sales@suptekmount.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>