Guangzhou C10 Capacitive Pen User Manual
- June 16, 2024
- GUANGZHOU
Table of Contents
Active Stylus Pen
USER’S MANUAL
How to Work
Press the button to turn on (indicator light on)
Press and hold the key to turn off (indicator off)
Press the switch button to switch the tool
Turn on the iPad and turn on the Bluetooth connection
Instant view of battery power
How to replace the spare Tip
Take off the plastic Tips as the photo
Charging mode
Magnetic suction charging/storage
Magnetic charging device for iPad Pro 11-inch （1st&2rd&3rd&4th ） for iPad Pro
12.9-inch （3rd&4th&5th&6th ） for iPad Air 4 for iPad Air 5 for iPad mini 6
The USB cable is connected with the USB charger, Magnetic suction charger and
pencil Wireless charging
Specification
Model:C10
Size:165×8.9mm
Battery: Li-polymer 100mAh
Charging mode: IPad adsorption wireless charging
/Wireless charging Cable
Charging Time:60 Minute
Working Time:12 Hours
Tip Size:1.7mm
Sleeping Protect:: 10 minute static automatic sleep
Protection mode: Automatically shuts down in 15 seconds on full power
Compatible Device
iPad Pro 11-inch (1st&2rd&3rd&4rd)
iPad Pro 12.9-inch (3rd&4th&5th&6th)
iPad Air (3rd&4th&5th)
iPad (6th&7th&8th&9th&10th)
iPad mini (5th&6th)
Tips:
Only compatible with 2018/2019/ 2020/2021/2022 Apple iPad / iPad Pro/iPad
Air/iPad mini Not support iPhone ,Android, Microsoft devices, earlier versions
of iPad.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.