enabling devices 9092 Adjustable Touch Screen Head Stylus User Guide
- June 12, 2024
- enabling devices
Table of Contents
enabling devices 9092 Adjustable Touch Screen Head Stylus
Product Information
- Product Name: Adjustable Touch Screen Head Stylus #9092
- Replacement Tips: #9091
- Manufacturer: Enabling Devices
- Technical Support Contact:
- Phone: 1-800-832-8697 (Monday through Friday, 9 a.m. to 5 p.m. EST)
- Email: customer_support@enablingdevices.com
- Address: 50 Broadway Hawthorne, NY 10532
- Website: www.enablingdevices.com
- Revision Date: 6/5/2020
Product Usage Instructions
- Hold the Adjustable Touch Screen Head Stylus firmly in your hand.
- Extend the stylus to the desired length by twisting it clockwise.
- Gently touch the stylus tip to the touch screen of your device.
- The stylus tip is adjustable to different angles. Rotate it to find the most comfortable position for use.
- In case the stylus tip wears out or gets damaged, replace it with the Replacement Tips #9091.
- To replace the tip, unscrew the old tip counterclockwise and screw in the new one clockwise.
- If you require technical support or have any questions, contact the Technical Service Department using the provided contact information.
Tablet access!
An essential aid for people with limited hand use. Our telescoping stylus is mounted on a light and comfortable headpiece and works with the slightest touch on your tablet, smartphone or computer. Headpiece adjustable. One size fits all; fits directly on head
- Adjustable nylon straps with non-slip rubber inserts; polycarbonate buckles
- Measures 6 to 7 inches in diameter; stretches to 12 inches in diameter; Stylus adjusts from 9″ to 20″L. Weight: 6 oz.
Operation
- The Adjustable Head Stylus is adjustable for head sizes 6″ to 12″ in diameter. The adjustments are made on the side and top of the headband. Adjust to a snug but comfortable fit. Once you have the adjustments done for a good fit (shown in photo 1), you can adjust the telescoping stylus for use.
- The Adjustable Stylus is on a telescopic rod you can adjust its length to fit your needs. The stylus will adjust from 9″ to 21½” inches. You are also able to adjust the angle of the telescopic rod up and down. Adjustment is made by first loosening the Philips Head screw on the Headband mounting base. Then the telescopic rod can be adjusted up or down to accommodate the user. Once the desired angle is set, lock it in place by tightening the Philips Head screw. Caution, do not over tighten the screw.
Replacement Tips
- When it comes time to replace the Stylus tip you will first need to remove band of silver tape wrapped around the base of the Stylus. Next you will unscrew the tip and replace it with one of the replacement tips (#9091 sold separately). The replacement tips will include a new tape strip to reapply to secure the tip to the Stylus. Please Note: Please Note: Please Note: The tape must be used to prevent the tip from becoming a choking hazard for young children. See Photo 4 on back page of this guide.
Care of Unit
- The Adjustable Stylus can be wiped clean with any mild household multipurpose cleaner and disinfectant.
- Do not submerge the unit, as it will damage the con Do not submerge tents of the top and the electrical components.
For Technical Support
- Call our Technical Service Department
- Monday through Friday, 9 a.m. to 5 p.m. (EST)
- 1-800-832-8697
- customer_support@enablingdevices.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>