Yu Yuan Limited SKU01 Bluetooth Speaker User Manual
- June 1, 2024
- Yu Yuan Limited
Table of Contents
Yu Yuan Limited SKU01 Bluetooth Speaker
Specifications
- Model: SKU#1
- Ratings: AC 120V/60HZ/0.3A 20W
Product Information
The Bluetooth speaker Model SKU#1 is a high-quality audio device designed to provide wireless music streaming capabilities. With a power rating of 20W, it delivers clear and crisp sound for an immersive listening experience. The speaker is equipped with Bluetooth technology for easy connectivity to various devices.
Product Usage Instructions
Installation
- Place the Bluetooth speaker on a stable surface.
- Ensure the minimum distance of 20cm between the speaker and your body for compliance with FCC’s RF Exposure guidelines.
- Use only the supplied antenna for optimal performance.
Bluetooth Pairing
- Turn on the Bluetooth speaker by pressing the power button.
- Enable Bluetooth on your device (phone, tablet, etc.).
- Search for available Bluetooth devices and select “SKU#1” to pair.
Audio Playback:
- Play music or audio on your connected device.
- Adjust the volume using the controls on the speaker or your connected device.
- Enjoy high-quality sound output from the Bluetooth speaker.
Using Instructions
Turn on the power. When the machine is powered on normally, the machine will
sound the power on tone. When the prompt tone is finished, you can receive the
Bluetooth name of the speaker through the Bluetooth device and can directly
pair the connection.
When the connected device is successfully connected to the speaker, the
speaker will prompt: The Bluetooth connection is successful. At this time, the
device and the speaker are connected, and the music on the device can be
played according to your personal preferences
FAQ
- Q: What should I do if the Bluetooth speaker is not pairing with my device?
- A: Make sure the speaker is in pairing mode and within range of your device. Restart both devices and try again. If issues persist, refer to the user manual for troubleshooting tips.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>