SEGWAY D18W Ninebot Electric Kick Scooter User Manual
- June 16, 2024
- Segway
Table of Contents
**SEGWAY D18W Ninebot Electric Kick Scooter User Manual
**
DIMENSION INSTRUCTION
The
manufacturer reserves the right to make changes to the product, release
firmware updates, and update this manual at any time. Visit www.segway.com or
check the Segway-Ninebot app to download the latest user materials. You must
install the app, activate your KickScooter, and obtain the latest updates and
safety instructions.
Diagram
Diagram Dashboard & Power Button
Power Button: Press the button to turn on; press and hold the button for
3 seconds to turn off. When the KickScooter is on, press the button to turn
on/off the headlight and the rear light, and press twice to switch between the
speed modes.
Speedometer: It displays the current speed of the scooter, as well as
error codes.
Walk Mode: Max. speed is 5 km/h (3.1 mph).
D18W: The headlight and tail light keep flashing and can’t be turned off.
How to enable it in the Segway-Ninebot app: Tap the sidebar menu > Settings >
Walk Mode.
Speed Mode: There are three modes. The top speed is as follows:
| Mode Model | D18W |
|---|---|
| ECO (Energy-saving mode) | 9.3 mph (15 km/h) |
| D (Standard mode) | 15.5 mph (25 km/h) |
| S (Sport mode) | 15.5 mph (25 km/h) |
Error Notification: It indicates that the scooter has detected an error.
Temperature Warning: It indicates that the battery temperature has reached
55°C (131°F) or is below 0°C (32°F).
At this point, the vehicle cannot accelerate and may not be charged. Do not
use until the temperature has reverted to the normal range.
Bluetooth: It indicates that the scooter has been successfully connected
to the mobile device. Battery Level : The total battery level equals 5
bars.
The battery power is very low when the first battery bar is red. Please charge
your KickScooter immediately.
Specifications
| Item| Parameter
---|---|---
Product
| Name| Ninebot KickScooter
Model| D18W
Length × Width × Height| Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm)
Folded: Length × Width × Height| Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495
mm)
Net Weight| Approx. 32.6 lbs (14.8 kg)
Rider| Payload| 66–220 lbs (30–100 kg)
Recommended Age| 14–60 years
Required Height| 3’11”–6’6” (120–200 cm)
Machine
| Max. Speed| Approx. 15.5 mph (25 km/h)
Typical Range[1]| Approx. 11.2 miles (18 km)
Max. Slope| Approx. 10%
Traversable Terrain| Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps <
1.2 in (3 cm)
Operating Temperature| -10–40°C (14–104°F)
Storage Temperature| -10–50°C (14–122°F)
IP Rating| IPX5
Duration of Charging| Approx. 3.5 h
Battery
| Nominal Voltage| 36 V
Max. Charging Voltage| 42 V
Charging Ambient Temperature| 0–40°C (32–104°F)
Nominal Capacity| 5100 mAh
Nominal Energy| 183 Wh
Battery Management System| Over-heating, short circuit, over-current, over-
discharge and over-charge protection
Motor| Nominal Power| 0.25 kW, 250 W
Max. Power| 0.5 kW, 500 W
Charger
| Output Power| 0.07 kW, 70 W
Input Voltage| 100–240 V~
Max. Output Voltage| 42 V
Rated Output| 41 V 1.7 A
Features| Brake Light| LED Rear Light
Speed Modes| ECO (Energy-saving mode), D (Standard mode), S (Sport mode)
Tire| Tire Pressure| 40–45 psi
Tires| 10-inch pneumatic tires
[1] Typical Range: tested while riding with a full battery, 165 lbs (75 kg)
load, 25°C (77°F), at the speed of 9.9 mph (16 km/h) on average on pavement.
Some of the factors that affect range include speed, number of starts and
stops, ambient temperature, etc.
Certifications
This product is certified to ANSI/CAN/UL-2272.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/CAN/UL-2271.
Federal Communications Commission (FCC) Compliance Statement for USA.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between the radiator &
your body.
Industry Canada (IC) Compliance Statement for Canada.
This device complies with Industry Canada license-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>