levenhuk PLUS LP20 Wezzer Weather Station User Manual

: June 4, 2024
: levenhuk

Table of Contents

levenhuk PLUS LP20 Wezzer Weather Station
Base Station
Sensor
Getting started
Sensor connection
Alert function
Weather
- Climate indication
Specifications
Care and maintenance
Battery safety instructions
Levenhuk International Lifetime Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk PLUS LP20 Wezzer Weather Station

levenhuk-PLUS-LP20-Wezzer-Weather-Station-product

Base Station

MEM/▼ button
ALERT button
CH/▲ button
Outdoor temperature (sensor 1)
Outdoor humidity (sensor 1)
Outdoor temperature (sensor 2)
Outdoor humidity (sensor 2)
Outdoor temperature (sensor 3)
Outdoor humidity (sensor 3)
Indoor temperature
Indoor humidity
Battery compartment cover
Table stand (fold-out)

Sensor

Temperature
Humidity
Current channel
LED indicator
Wall mount hole
RESET button
Channel switch (1—3)
Battery compartment cover
Battery compartment

The kit includes a base station, 3 sensors, a user manual, and a warranty. Also required (not included):

2 AAA batteries for each sensor
2 AA batteries for the base station

Getting started

Base station

Open the battery compartment cover (13) and insert 2 batteries according to the correct polarity. Close the cover.
Wait until the indoor temperature is displayed on the base station.

Sensor

Open the battery compartment cover (8). Set the desired channel with the switch.
NOTE! This weather station can be operated with up to 3 remote sensors. Each remote sensor that is to be connected must be operated on a different channel. If only one remote sensor is connected, it should be operated on channel 1.
Insert 2 batteries according to the correct polarity. Close the cover.
To re-establish the sensor connection manually, press RESET using a pin.

Sensor connection

Place the base station and the remote sensor within the effective transmission range. Ensure that the channels are assigned after you set up the power supply for the base station and all the sensors.
If the reception is successful, the display will show the temperature and humidity of the respective outdoor sensor. If the values are not received from a channel, “—” appears on the display. Check the batteries and try it again. Check if there is any source of interference.
When changing batteries, replace the batteries first in the base unit, and then in all the sensors, to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly.
The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little. Sometimes it is enough to move one of these units a few inches!

NOTE! Although the sensor is weather resistant, never place it in direct sunlight or in the rain or snow.

Alert function

Press the CH/▲ button until an arrow is displayed next to the desired channel. Then, press and hold the ALERT button for 3 seconds. The digits that are to be set are flashing. Press ▲ or ▼ to set the desired value limit. The setting order: temperature upper limit → temperature lower limit → humidity upper limit → humidity lower limit. To activate the alarm, press the ALERT button once again when the digits are still flashing. Finally, press the ALERT button to save the settings and exit. To stop the alarm, press any button.

NOTE! The temperature and alert icons will still be flashing until the temperature is back to normal.

To turn off the alert function, press the ALERT button, and then press and hold it again for 3 seconds to enter the alert setting of the channel where the arrow is located. Now, press and hold the ALERT button until the alert is off.

Low battery indicator
If the low battery indicator is displayed for either the outdoor sensor or the base station, immediately change the batteries.

Weather

Temperature/humidity

Press and hold the MEM/▼ button to switch between °C and °F.
Press the ALERT button to display the high/low temperature and humidity alert.

Climate indication

The climate indication is a pictorial indication based on indoor air temperature and humidity in an attempt to determine the comfort level.

Trend arrow indicators

The temperature and humidity trend indicator shows the trends for the forthcoming few minutes. Arrows indicate a rising, steady or falling trend.

History record

Press the MEM/▼ button to display the MAX./MIN. temperature and humidity.
To clear the history records, press and hold the MEM/▼ button for 3 seconds.

Specifications

Base station

Air humidity, units of measurement| % (RH)
Operating humidity range (indoors)| 20… 95%
Temperature, units of measurement| °F, °C
Operating temperature range (indoors)| –10… +60°C (+14… +140°F)
Screen| monochrome
Power supply| 2 AA batteries (not included)
Dimensions| 102.5x25x140mm (4×0.9×5.5in.)
Wireless sensor| 3 pcs. (included)
Sensor

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Only use accessories and spare parts for this device that comply with the technical specifications.
Check this device and its cables and connections for any possible damage before use.
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and -). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee of the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details, please visit www.levenhuk.com/warranty.

If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Levenhuk Cleaning Pen LP10

Removes dust with a brush
The soft tip is treated with a special cleaning fluid that removes greasy stains
Does not damage the optical coatings of the lenses
Leaves no smudges or stains

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612, USA, +1-813-468-3001, contact_us@levenhuk.com Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102, Czech Republic, +420 737-004-919, sales-info@levenhuk.cz Levenhuk® is a registered trademark of Levenhuk, Inc. © 2006—2022 Levenhuk, Inc. All rights reserved. www.levenhuk.com 20220421.