ZALMAN S4 Plus, S4 Plus TG ATX Mid Tower Case User Manual
- June 4, 2024
- ZALMAN
Table of Contents
- Precautions
- Features
- Accessories
- I/O Ports
- Dismantling the side panels
- Dismantling the front panel
- Mounting the motherboard
- Mounting the power supply
- Mounting the PCI-E (VGA) Card
- Mounting 3.5″ and 2.5″ SSD/HDD
- Installing the radiator
- Mounting the fans
- I/O connectors
- Warranty period
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZALMAN S4 Plus, S4 Plus TG ATX Mid Tower Case User Manual
Precautions
- Read this manual carefully before installing.
- Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
- Wear gloves to prevent accidents when installing the product.
- Severe damage may occur when mounting the system, so do not apply excessive force.
- Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
- Be careful not to block the ventilation hole of the product when using the system.
- Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
- Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
- Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
- Store and use the product out of children’s reach.
- Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
Features
Model | S4 PLUS | S4 PLUS TG |
---|---|---|
Case Form Factor | ATX Mid-Tower | |
Dimensions | 400(D) x 206(W) x 458(H)mm | |
Weight | 3.7kg | 4.9kg |
Case Materials | Plastic, Steel | Plastic, Steel, Tempered Glass |
Motherboard Support | ATX / mATX / Mini-ITX | |
Maximum VGA Length | 315mm (Without fan, Radiator) | |
Maximum CPU Cooler Height | 160mm | |
Maximum PSU Length | 180mm | |
PCI Expansion Slots | 7 | |
Drive Bays | 2 x 3.5”(1 x Combo) / 1 x 2.5” SSD | |
Fan Support | Top | 2 x 120mm |
Front | 3 x 120mm | |
Rear | 1 x 120mm | |
Bottom | 2 x 120mm | |
Pre-Installed Fan(s) | Front | 2 x 120mm (RGB) |
Rear | 1 x 120mm (RGB) | |
Radiator Support | Front | 120mm / 240mm |
Rear | 120mm | |
I/O Ports | 1 x Headphone, 1 x Mic, 2 x USB 2.0, |
1 x USB 3.0, Reset Button, Power Button
Accessories
-
Manual
-
Buzzer
-
PCI slot cover x 2
-
Cable tie x 5
-
Thumb screws x 2
-
Rubber cover USB x 3
-
hard drive screws x8
-
Vis SSD / MB x 22
-
Vis PSU / VGA x 8
-
Motherboard stand-offs x 6
-
Fan screw x2
-
Sliding screw of hard disk x 2
-
Media rubber cover x 2
I/O Ports
#
| Part| #| Part| #| Part| #|
Part
---|---|---|---|---|---|---|---
⑥| Power Button| ⓑ| Reset Button| ⓒ| HDD/ Power LED| ⓓ| Microphone Jack
⑥| Headphone Jack| ⓕ| USB 2.0 Ports| ⑨| USB 3.0 Port| |
Dismantling the side panels
-
Acrylic Panel
-
Steel Panel
Dismantling the front panel
Mounting the motherboard
Motherboard size
-
ATX
-
mATX
-
Mini-ITX
Mounting the power supply
Mounting the PCI-E (VGA) Card
Mounting 3.5″ and 2.5″ SSD/HDD
-
HDD
-
SSD
Mounting the SSD / HDD 2,5”
Installing the radiator
-
Mounting the front radiator Radiator 120mm / 240mm.
-
Mounting the rear radiator Radiator 120mm.
Pre-installed fan(s)
- Pre-Installed rear 120mm RGB fan
- Pre-Installed front 2 x 120mm RGB fan
Mounting the fans
-
Mounting the top fans
-
Mounting the front fans
-
Mounting the bottom fans
I/O connectors
Warranty period
- 1year from the date of purchase. (However, when there is a purchase receipt)
- Free A/S: In case of defects or defects in the product’s own performance within the warranty period.
- Paid A/S: When a problem occurs in using the product after the warranty period. However, free A/S processing is not available for the following matters even within the warranty period. It is handled at the consumer’s expense.
- If you do not follow the precautions and precautions before installation specified in this user manual.
- In case of deformation, damage/destruction due to the user’s intention, negligence or negligence.
- In case of deformation or malfunction due to user’s arbitrary modification.
- When the quality assurance sticker is removed or damaged.
- In case of malfunction due to natural disaster.
- In case of malfunction due to use in an abnormally humid environment or a space with a lot of dust and other foreign substances (worms, etc.).
- Parts retention period: 2 years from the date of product discontinuation (However, the time of discontinuation is based on the final shipment date of the discontinued product.)
- A/S information
- Operating Hours: Weekdays 10:00 ~ 16:00 (Closed on holidays, Saturdays and Sundays)
- How to apply ① Visit visit: Visit www.zalmansvc.com and sign up for service and bring the product you received. ② Courier reception: After accessing www.zalmansvc.com and registering as a member, service application is accepted. After entering your name, contact information, and symptoms, the courier will be sent in advance.
- Reception desk ※ After checking the exact location and address of the A/S center on the website, visit or send by courier.
- Product transportation cost 1) In case of initial defect: In case of initial defect, round-trip freight cost will be borne by us. 2) In case of free A/S: In principle, the cost of courier delivery within the free period shall be borne by the customer once (prepaid). 3) Paid A/S and after warranty period: All round-trip costs are borne by the customer.
- How to check the date of manufacture