AUKEY Mini Touch Control LED Lamp User Manual
- June 7, 2024
- Aukey
Table of Contents
User Manual
Mini Touch Control LED Lamp
Thank you for purchasing the AUKEY LT-ST21 Mini Touch Control LED Lamp. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
Mini Touch Control LED
Lamp Micro-USB Cable
User Manual
Warranty Card
Product Diagram
Specifications
| Model | LT-ST21 |
|---|---|
| Brightness | 180 lumens(Max) |
| Color Temperature | 2900-3100K |
| Color Rendering Index | 80Ra |
| Input | DC 5V 1A |
| Power Consumption | 2W |
| Charging Time | 4-5 hours |
| Continuous Use Time | 5.5 hours (brightest light), 30 hours (dimmest light) |
| Battery Capacity | 2600mAh |
| LED Type | SMD 5730 |
| Number of LEDs | 6 |
| Dimensions | 147 x 100 x 100mm / 5.79″ x 3.93″ x 3.93″ |
| Weight | 380g / 13.40oz |
Getting Started
Connect one end of the included micro-USB cable to the charging input port of the lamp and the other end of the cable to a USB charger or charging port to charge. LED indicator will be red while charging and soft yellow when fully charged. Charging takes around 4 hours.
Using the Lamp
- Switch on the lamp on/off switch on the bottom of the base to turn on the lamp (LED indicator will be soft yellow when switched on) and place the lamp down where you want to use it.
- Tap anywhere on the touch-sensitive control surface (silver area) to light up the lamp. Increase brightness by tapping a second and third time. There are three brightness levels.
- Tap a fourth time to switch off the light.
Using Lamp Color Mode
- Long touch the panel for about 3 seconds (whether the lamp is lit or not) to turn on automatic color cycling mode
- Tap once to pause on any color. Tap once again to continue automatic color cycling
- Long touch the panel for about 3 seconds to turn off the light
Product Care & Use
- Don’t repair, dismantle, or modify the product
- Keep away from liquids and extreme heat
- Don’t use on conductive surfaces (such as metal tables), which may interfere with touch control
- Disconnect the power cable and switch off the lamp on/off switch before cleaning or when not in use for a long time
- Clean the lamp only with a soft dry cloth.
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order number
and product model number.
Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders:support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com
*Please note, AUKEY can only provide after-sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.
AUKEY International Ltd.
www.aukey.com |
support@aukey.com
No.102, Building P09, Electronics Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong, 518111, CN
