GRANDSTREAM WP826 Cordless Wi-Fi IP Phone Installation Guide

: June 26, 2024
: GRANDSTREAM

Table of Contents

WP826 Cordless Wi-Fi IP Phone
PRECAUTIONS
OVERVIEW
SETTING UP THE WP826
CONNECTING WP826 TO WI-FI NETWORK
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GRANDSTREAM WP826 Cordless Wi Fi IP Phone-

WP826
Cordless Wi-Fi IP Phone
Quick Installation Guide

WP826 Cordless Wi-Fi IP Phone

The WP826 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIPcompliant Internet telephone service, properly configure the WP826 to use that service, and periodically test your configuration to confirm that it works as you expect. It is also your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE WP826. NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE WP826 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.
The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here:
http://www.grandstream.com/legal/open-source-software To obtain a CD with GPL source code information please submit a written request to info@grandstream.com

PRECAUTIONS

Do not attempt to open, disassemble, or modify the device.
Do not use a third party power adapter.
Do not expose the device to temperatures outside the range 0 °C to 45 °C (in operation) and -20 °C to 60 °C (in storage).
Do not expose the WP826 at environments outside of the humidity range of 10-90% RH (non-condensing).

OVERVIEW

The WP826 is a cordless Wi-Fi IP phone suitable for many enterprise and vertical market applications,including offices, retail, logistics, healthcare, security, and more. This high-end cordless Wi-Fi phone is equipped with integrated dual band Wi-Fi 6, an advanced antenna design, roaming support, 4-way voice conferencing, and support for the Opus HD voice codec. The WP826 provides 12 hours of talk-time and 240 hours of standby time through a 3000mAh battery to drive employee productivity. By providing a sleek design, easyto- use interface, and a variety of practical, customizable features, the WP826 provides mobility and flexibility to all voice solutions.

WP826 PACKAGE CONTENTS

GRANDSTREAM WP826 Cordless Wi Fi IP Phone- PACKAGE
CONTENTS

SETTING UP THE WP826

Charging Station:
Plug the power adapter into a power source socket to start using the charging station.

Charging station
Power adapter

Handset:

Open the battery cover from the opening port.
Insert the battery with the electrodes in the bottom left corner.
Close the battery cover.

Note: Please charge the battery fully before using the handset for the first time.

Battery cover
Battery
Rear of handset

INSTALLING THE WP826 ON THE WALL

Unscrew the M3 screw of the charge station and take out the wall bracket
Drill holes on the wall and insert expansion screws
Thread the screw through the wall bracket and fix it to the wall
Place the charge station and wall bracket together
Fix the charge station and bracket with M3 screw
Insert into the phone

WP826 DESCRIPTION

GRANDSTREAM WP826 Cordless Wi Fi IP Phone- DESCRIPTION

CONNECTING WP826 TO WI-FI NETWORK

On LCD menu, press Menu key and navigate to Settings → Wi-Fi Settings.
Set Wi-Fi to “On” and navigate to “Wi-Fi Network”. A list of Wi-Fi networks will be displayed.
Select the desired network to connect to. (Enter the correct password to connect if requested)

WP826 will display Wi-Fi icon on top of the main LCD menu if the connection to the Wi-Fi network is successful.

ACCESSING WP826 WEB GUI

Press the UP button to see the IP address.
Type the phone’s IP address in your PC browser.
Note: The computer needs to be on same network as WP826.
Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit).

GRANDSTREAM WP826 Cordless Wi Fi IP Phone- WEB GUI

Refer to online documents and FAQ for more detailed information: https://www.grandstream.com/our-products

Certification Regulatory Information
Common part
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The earpiece is easy to absorb small object, please take care to avoid scratching.
U.S. FCC Part 68 Regulatory Information

This equipment is hearing aid compatible.
This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN’s on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the REN’s should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total REN’s contact the telephone company to determine the maximum REN for the calling area. This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right the file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.
If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.
This equipment uses the following USOC jacks: NA.
It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected. This is to avoid damaging the equipment caused by local lightening strikes and other electrical surges.
If trouble is experienced with this equipment, please contact (Agent in the US):
Company Name: Grandstream Networks, Inc.
Address: 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA
Tel: 1-617-5669300
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
This model (FCC ID: YZZWP826) has also been tested against this SAR limited.
The highest SAR value reported under this standard during product certification for use at the head is 0.68 W/kg and Body-worn is 1.34 W/kg. Body-worn SAR testing was worn on the belt clip at a separation distance of 1.0 cm. To meet RF exposure guidelines during body-worn operation, the device should be used with the belt clip.
Canada Regulatory Information
Radio equipment
Operation of 5150-5350 MHz is restricted to indoor use only.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

The SAR limit of Canada (IC) is 1.6 W/kg averaged over one gram of tissue. This model (IC: 11964A-WP826) has also been tested against this SAR limited.
The highest SAR value reported under this standard during product certification for use at the head is 0.61 W/kg and body is 0.72 W/kg. Body- worn SAR testing was worn on the belt clip at a separation distance of 1.0 cm. To meet RF exposure guidelines during body-worn operation, the device should be used with the belt clip.
CAN ICES-003 (B)/NMB-003(B)
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
Terminal equipment
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five.
EU Regulatory Information
In all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
Support Frequency Bands and Power:
Bluetooth/ BLE 2402-2480MHz<10dBm;
Support Frequency Bands and Power:
Bluetooth/ BLE 2402-2480MHz<10dBm;
WLAN 2412-2472 MHz < 20 dBm;
RLAN 5150-5250 MHz < 23 dBm;
RLAN 5250-5350 MHz < 20 dBm;
RLAN 5470-5725 MHz < 20 dBm;
WLAN 5725-5850 MHz < 14 dBm;
The body SAR limit of EU is 2 W/kg@10g averaged over one gram of tissue. This model WP826 has also been tested against this SAR limited.
The highest SAR value reported under this standard during product certification for use at the body is 0.45 W/kg@10g (5 mm Separation Distance), head is 0.20 W/kg@10g and limbs is 0.64 W/kg@10g(0 mm Separation Distance).
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type [WP826] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.grandstream.com