Thomann Achat 112M passive speaker User Manual
- June 7, 2024
- Thomann
Table of Contents
Thomann Achat 112M passive speaker
General notes
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device, include the manual for the next owner. Our products are subject to a process of continuous development. We, therefore, reserve the right to make changes without notice.
Symbols and signal words
This section provides an overview of the symbols and signals words used in
this user manual.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal words indicates an |
immediately dangerous situation that will result in death or serious injury if
it is not avoided.
WARNING!| This combination of symbol and signal word indicates a
possible dangerous situation that can result in death or serious injury if it
is not avoided.
CAUTION!| This combination of symbol and signal word indicates a
possible dangerous situation that can result in minor injury if it is not
avoided.
NOTICE!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in material and environmental damage if it
is not avoided.
|
Warning signs| Type of danger
| Warning – suspended load.
Safety instructions
Intended use
This device is designed for sound reinforcement. Use the device only as
described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use. This device may be used only by persons with sufficient
physical, sensorial, and intellectual abilities and having corresponding
knowledge and experience. Other persons may use this device only if they are
supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts (e.g. knobs or the like) from the unit.
They could swallow the pieces and choke! Never let children unattended use
electrical devices.
WARNING!
Consequences of faulty mounting
Faulty mounting may lead to lethal injuries or property damage. Please ensure
that the norms and regulations valid in your country are always observed when
mounting and operating your product. In Germany: BGV C1, “Event and Production
Sites for Stage Presentations”. Only expertly trained staff may mount
speakers.
CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage. Decrease the volume level immediately
if you experience ringing in your ears or hearing impairment. If this is not
possible, keep a greater distance or use sufficient ear protectors.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy
dirt, and strong vibrations. Only operate the device within the ambient
conditions specified in the chapter ‘Technical specifications’ of this user
manual. Avoid heavy temperature fluctuations and do not switch the device on
immediately after it was exposed to temperature fluctuations (for example
after transport at low outside temperatures). Dust and dirt inside can damage
the unit. When operated in harmful ambient conditions (dust, smoke, nicotine,
fog, etc.), the unit should be maintained by qualified service personnel at
regular intervals to prevent overheating and other malfunctions.
NOTICE!
Possible staining
The plasticizer contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate, or PVC floor and
after some time cause permanent dark stains. In case of doubt, do not put the
rubber feet directly on the floor, but use felt-pad floor protectors or a
carpet.
Features
Special features of the device:
- Passive 2-way full-range speaker with built-in crossover
- Connection options: 4 lockable NL4 sockets (Power Twist)
- For use with ‘Achat Amprack’, various products are available. Appropriate subwoofers, for example, are: ‘the box pro-Achat 115Sub’ or ‘the box pro TP118/800’.
- Flying tracks on top of the housing and an eye on the back for tilting. Mounting for vertical hanging is optionally available
- 36 mm pole flange on the bottom
- Rotatable horn
- Black textured coating
Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that
apply in your country. Always secure the device with a secondary safety
attachment, such as a safety cable or a safety chain.
NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an
appropriate distance to devices that can be adversely affected or damaged by
an external magnetic field.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Tips on handling speakers
We recommend you set up the speakers in a way, that the sound signals can
reach the audience unobstructedly. It will often be helpful to mount the
speakers on tripods. Thus, the sound will be evenly spread with maximum range
throughout the audience area. Always use high-grade cables to connect your
equipment. Otherwise, you won’t reach maximum sound quality.
For optimum results, both the impedance and power handling of the speakers must match the requirements of the amplifier. Always follow the technical specifications of the speakers! The overall impedance of the connected loudspeakers must not decree the minimum output impedance of the amp. The amps max. RMS output power should be 50 % above the power handling capacity of the connected speakers. If you notice distortion during operation, either the amp or the speaker is overloaded. This may permanently damage the amp or the speaker. Always reduce the volume when you hear distortion.
Hanging the speaker box
To hang the speaker box on special mounting devices (aka ‘flying’), the top
of the box offers built-in Aeroquip or fly tracks. In these tracks safety
eyelets (double studs) can be screwed or latched. Check the secure connection
of the safety eyelets with the box carefully, before you use it in ‘flying
mode’. Using an additional loop on the back of the box, it is possible to tilt
the box. This additional loop must not solely be in charge to secure the
entire suspended weight.
Connections
1, 2 Two NL4 connections wired in parallel on the rear panel (Power Twist)
One additional NL4 connection is located on the top side and one on the
bottom side of the housing. Find more information about the wiring of the NL4
connections on the rear panel.
NL4 mounting connectors for speaker connections
The adjoining figure shows the pin assignment of the lockable NL4 panel
connectors.
Technical specifications
Speaker| 1 × 12″ woofer, 1″ mid-range neodymium transducer (with 3″ voice
coil)
---|---
Input connections| 2 × NL4 sockets (Power Twist)
Frequency range| 60 Hz … 18 kHz, –3 dB
Load capacity| 350 W (RMS), 1400 W (peak)
Sensitivity (1 W/1 m)| 131 dB
Rated impedance| 8 Ω
Dispersion angle (V × H)| 60° × 40° (horn)
Dimensions (W × H × D)| 360 mm × 600 mm × 365 mm
Weight| 21 kg
Ambient conditions| Temperature range| 0 °C…40 °C
Relative humidity| 20 %…80 % (non-condensing)
Further information
| Monitor inclination | Yes |
|---|---|
| Colour | Black |
| Protective cover | Suitable protective cover optionally available (item no. |
Protecting the environment
Disposal of the packaging material
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling. Ensure
that plastic bags, packaging, etc. are properly disposed of. Do not just
dispose of these materials with your normal household waste, but make sure
that they are collected for recycling. Please follow the notes and markings on
the packaging.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose of
your normal household waste. Dispose of this device through an approved waste
disposal firm or through your local waste facility. When discarding the
device, comply with the rules and regulations that apply in your country. If
in doubt, consult your local waste disposal facility.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>