MONSTER XKT11 Airmars Bluetooth Wireless Headphones Instruction Manual

: June 3, 2024
: Monster

Table of Contents

Product parameters
Product Schematic Description
Product operating instructions
Restore Factory settings
Precautions
FCC Statement
Warranty Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MONSTER XKT11 Airmars Bluetooth Wireless Headphones Instruction Manual

Product parameters

Transmission distance: 10m
Driver diameter: Φ13mm
Driver impedance: 32Ω±15%
Sensitivity: 106±3.0dB
Frequency response range: 20Hz-20kHz
Battery capacity(Charging case): 3.7V 300mAh
Battery capacity(Headphone): 3.7V 35mAh
Charging time(Charging case): ≈1.5 hours
Music playtime(Headphone): ≈4 hours
Music playtime with charging case: ≈17 hours

Product Schematic Description

Headphone*2
Charging case*1
Instructions Manual*1
Type-C Charging Cable*1

Charge the charging case

Connect the charging case to the 5V power adapter with Type-C charging cable.
Charging Instructions

Rated input: 5V 30mA(Headphone)
Rated input: 5V 300mA(Charging case)

TIPS: When charging case closed and the LED flash red, pls charging the charging case.

Indicator guide

Mode

| Describe|

Sound prompt

---|---|---
Power On| The headphones LED indicator flash in ice blue light for one second.| “Power on”
Power Off| The headphones LED indicator flash in ice blue light for three times.| “Power off”
Pairing| The headphones LED indicator flash in ice blue light| “Pairing”
Connected| The headphones LED indicator is off.| “Connected”
Disconnected| The headphones LED indicator flash in ice blue light| “Disconnected”
Low Battery| | “Battery low”
Headphones placed in charging case| The indicator LED of headphones stay on blue when fully charged it goes out|
Charging case low power| Red LED flash|
Charging case charged| The LED indicator flash red slowly.|
Charging case \. fully charged| Red LED stayed on|

Product operating instructions

Power on
Method 1: Restore factory settings Open the charging case,the headphones will turn on automatically.
Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
Power off
Method 1: Put the headphones into the charging case ande close the cover.
Method 2: When the headphones is not connected to the Bluetooth device long touch the MF button of the headphones for 6s to turn off the headphones.
Method 3: After disconnected from the Bluetooth device for 3 minutes.
Pairing
Step one: Open the charging case, the headpnones will start pairging automatically.
Step two: Search and click for”Monster Airmars XKT11”on the Bluetooth list of the smart device,and when connection is successful,”Connected”will be heard.

Headphones will try reconnecting to the device within 3 minutes when connection is lost.

NOTE:

Fully charge the headphones and power off before an intended not-in-use period.
Unplug the charging cable after charging

Operation

Normal
Operating Instructions
Music playback

Phone
Operating Instructions
Game/music switching: device connected

Restore Factory settings

Headphones are not connected to the Bluetooth version device when turned on, click the MFB 5 times to clear the previous pairing information and repaired again.

Precautions

Headphones will turn on automatically(needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
Keep battery(battery pack)away from inflammables or excessive heat such as direct sunlight.
Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, etc.

Warnings

Do not use headphones at high volume for an extended perios of time.
Keep the headphones away from dust and water.
Do not disassemble the headphones and accessories, otherwise warranty will be voided.
Keep headphones away from any impact or vibration.
Do not use any chemical solvents or cleaning agent on the headphones.

Name of the Parts

|

Hazardous Substances

---|---
Pb| Hg| Cd| Cr(VI)| PBB|

PBDE

Housing

PCBA

| X| | | | |
Accessories| X| | | | |

This table is compliled according to SJ/T 11364
O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Environment Friendly Use Period(EFUP)

This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage toany assets.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!