VEVOR SS1380-ZW 5 Rifles Gun Safe User Manual

June 13, 2024
VEVOR

VEVOR SS1380-ZW 5 Rifles Gun Safe User Manual
VEVOR SS1380-ZW 5 Rifles Gun Safe

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SymbolWarning- To reduce the risk of injury, user must read instructions manual carefully.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices

INSTRUCTIONS

Thank you very much for choosing this safe box. Please read all of the instructions before using it. The information will help you achieve the best possible results.
INSTRUCTIONS

TECHNICAL PARAMETERS

SS1447-DZ SS1380-ZW
Working Voltage Range 4.2-6.8Vdc
Working Undervoltage Point 4.5V plus or minus 0.20V
Quiescent Current Less than 5A
Product Size 3002801380 mm
Net Weight 24.2 kg
Gross Weight 30.0 kg
Working Power 4 x AAA(1.5V) batteries

PARTS LIST

  • Built-in Storage Key*2

  • Expansion Bolt5 (φ1050)

  • External Power Box*1

WARNING

  1. Danger of Tipping Over
    • A child or adult can tip the safe and be killed or seriouslyinjured.
    • Serious injury may occur to children and adults if thesafeisnot secured before installation.
    • Children should not play with or around the safe at anytime
  2. Please Do Not Put the Emergency Key, the External Power Box In The Safe BOX

GETTING STARTED

  1. Move down the silver part of the keyboard lock reveals the emergency keyhole.
  2. At this time, the emergency key channel is exposed.
  3. Insert the emergency key and turn it 35° counterclockwise
  4. Turn Handle clockwise to unlock the safe.
    Tip: Use the emergency key when opening the door for the first time. After installing the battery, set the fingerprint and digital password.

SET FINGERPRINT

  1. Press the setting button and hear the short sound of “beep” at the same time. The fingerprint scanner lights up. Then place the finger to be registered in the center of the scanner.
  2. When you hear a short “beep” sound, remove your finger and press again.
  3. Repeat 4 times, hear the sound of “beep”, fingerprint registration is successful, the green light is on.
  4. Fingerprint capacity 30 pieces.

DELETE FINGERPRINT

After you hold down the setting button for about 5 seconds, a beep will sound, indicating that the coffer is cleared successfully. After initialization, you can open the coffer with any fingerprint.

ALARM FUNCTION

If the fingerprint is incorrectly entered for six consecutive times, the alarm will be raised for one minute. When the alarm is active, the correct fingerprint can relieve the alarm and open the door.

UNDERVOLTAGE INDICATION

  1. The gun safe needs four 1.5V alkaline batteries.
  2. If the voltage is insufficient inside the door, the buzzer will sound “beep” in unlock state to remind user to replace the battery in time.

Note: It is recommended to use ordinary batteries, avoid to use lithium batteries or different brand of recharging batteries.

MOUNTING INSTRUCTIONS

The safe could be mounted to a wall or floor.

  • Drill the appropriate size holes for the anchors you are using.
  • Mount the safe by running screws from inside of the safe and securing to anchors; ensure the safe is mounted securely on the floor.
  • Use proper drill tools depending on the type of floor you are mounting (wood, tile, or concrete).

In kind prevails
Made in China

Technical Support and E-Warranty Certificate www.vevor.com/support

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only representsanestimate of savings you might benefit from buying certain tools with us compared to themajor top brands and doses not necessarily mean to cover all categories of tools offered by us. Youare kindly reminded to verify carefully when you are placing an order with us if youareactually saving half in comparison with the top major brands

NEED HELP? CONTACT US!

Have product questions? Need technical support? Pleasefeel freetocontact us:
CustomerService@vevor.com

VEVOR logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals