nVent LENTON RBWS1547M Horizontal Pouring Basin Instructions
- June 16, 2024
- nVent LENTON
Table of Contents
nVent LENTON RBWS1547M Horizontal Pouring Basin
**Brands
**
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
All trademarks and registered trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Prepare the Pouring Basin Frame
Prior to using the RBWS1547 pouring basin, ensure you have the RBW332
pouring basin frame (sold separately). Follow the instructions provided in the
nVent LENTON Cadweld Rebar Splicing System Instruction Manual for proper
installation of the pouring basin frame.
Step 2: Position the Pouring Basin
Identify the location where the pouring basin needs to be installed. Ensure
that there are no interferences in the structure that would prevent top
filling of the sleeve. The RBWS1547 pouring basin is designed for side filling
in such cases.
Step 3: Insert the Pouring Basin
Insert the RBWS1547 pouring basin into the RBW332 pouring basin frame.
Ensure a secure fit.
Step 4: Pouring Process
Follow the pouring instructions provided in the nVent LENTON Cadweld Rebar
Splicing System Instruction Manual for proper pouring techniques and safety
precautions.
Step 5: Post-Installation Checks
After the pouring process is complete, perform necessary post-installation
checks to ensure proper alignment and functionality of the pouring basin.
Step 6: Maintenance
The RBWS1547 pouring basin is durable and long-lasting. Regularly inspect
the pouring basin for any signs of damage or wear. Replace if necessary.
Step 7: Troubleshooting
If you encounter any issues with the RBWS1547 pouring basin or need
assistance, refer to the troubleshooting section of the nVent LENTON Cadweld
Rebar Splicing System Instruction Manual or contact your nVent LENTON
representative.
FEATURES
- Made from heat-resistant graphite
- Durable, reusable, and long-lasting
- Designed for use with T-Series and B-Series horizontal side-fill sleeves
PRODUCT ATTRIBUTES
- Material: Graphite
- Diameter: 3.750″
- Length 1 : 5.500″
- Length 2: 0.880″
- Width: 3″
- Height 1 : 5.380″
- Height 2: 2.630″
ADDITIONAL PRODUCT DETAILS
- RBWS1547 pouring basins require one RBW332 pouring basin frame (sold separately).
- Before installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
- Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse,
misapplication, or another failure to completely follow nVent’s instructions
and warnings may cause product malfunction, property damage, serious bodily
injury, and death and/or void your warranty
FAQ
Frequently Asked Questions (FAQ)
- Can the RBWS1547 pouring basin be used with other pouring basin frames?
- No, the RBWS1547 pouring basin is specifically designed to work with the RBW332 pouring basin frame. It is not recommended to use it with other frames as it may affect the performance and safety of the product.
- Is the RBWS1547 pouring basin reusable?
- Yes, the RBWS1547 pouring basin is designed to be durable and reusable. However, it is important to regularly inspect the pouring basin for any signs of damage or wear and replace if necessary.
- Where can I find the nVent LENTON Cadweld Rebar Splicing System Instruction Manual?
- The nVent LENTON Cadweld Rebar Splicing System Instruction Manual can be found on the nVent website at www.nvent.com. It is also available from your nVent customer service representative.
CONTACT
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europe German y: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe Netherlands:
- +31 800-0200135
France:
- +33 800 901 793
Europe Germany:
- 800 1890272
Other Countries:
- +31 13 5835404
APAC Shanghai:
- + 86 21 2412 1618/19
Sydney:
- +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>