nVent LENTON RBW117A Horizontal Packing Clamp Owner’s Manual
- June 16, 2024
- nVent LENTON
Table of Contents
nVent LENTON RBW117A Horizontal Packing Clamp
Product Information
Specifications
- Material: Steel
- Diameter: 1.380
- Length 1: 14.630
- Length 2: 11
- Length 3: 5.500
- Width: 4.510
- Height: 1.940
Product Usage Instructions
1. Installation Precautions
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
2. Installation Steps
- Identify the appropriate location for the horizontal packing clamp.
- Ensure that the reinforcing steel bar sizes match the clamp’s compatibility.
- Place the clamp around the end alignment fittings.
- Adjust the clamp to fit securely.
- Tighten the clamp to compress the packing materials, reducing or eliminating leakage of filler material during installation.
3. Safety Precautions
Follow these safety precautions to ensure proper and safe usage of the horizontal packing clamp:
- Only use the clamp as indicated in the product instruction sheets and training materials provided by nVent.
- Improper installation, misuse, misapplication, or failure to follow nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, and even death.
- Contact nVent customer service or visit their website for the latest instruction sheets and training materials.
FAQ
Q: Where can I find the nVent product instruction sheets?
A: Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
Q: Can the horizontal packing clamp be used with different reinforcing steel bar sizes?
A: Yes, the clamp is designed to fit multiple reinforcing steel bar sizes.
Q: Can I adjust the clamp after installation?
A: Yes, the clamp is adjustable to ensure a secure fit.
Q: What should I do if I encounter any issues with the product?
A: Contact nVent customer service for assistance. Their contact information can be found in the manual or on their website.
Introduction
The horizontal packing clamp holds the end alignment fittings in place and compresses the packing materials to reduce/eliminate leakage of filler material during installation.
FEATURES / PRODUCT ATTRIBUTES
FEATURES
- Easy to install and adjust
- Fits multiple reinforcing steel bar sizes
PRODUCT ATTRIBUTES
- Material: Steel
- Diameter: 1.380″
- Length 1: 14.630″
- Length 2: 11″
- Length 3: 5.500″
- Width: 4.510″
- Height: 1.940″
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.