nVent LENTON T-Series Horizontal Installation Equipment Owner’s Manual
- June 16, 2024
- nVent LENTON
Table of Contents
nVent LENTON T-Series Horizontal Installation Equipment
Product Information
Specifications
- Catalog Number: RBW7399H
- Product Name: T-Series Horizontal Installation Equipment
- Rebar Size, Metric: 28 mm
- Rebar Size, US: #9
- Rebar Size, Canada: 30M
- Material: Steel;Graphite
Features
- Simplifies ordering
- Used to splice the same diameter bars
- All components are designed for an extended life
Additional Product Details
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System instruction manual. Components can also be purchased separately:
- Pouring Basin Frame
- Crucible Chain Assembly
- Crucible Extension
- Crucible Cover
- End Alignment Fitting
- Horizontal Packing Clamp
Contact Information
For assistance or inquiries, please contact:
- Europa Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europa Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Disclaimer
nVent reserves the right to change specifications without notice.
FAQ
Q: Can the components be purchased separately?
A: Yes, the components can be purchased separately. The available components are the Pouring Basin Frame, Crucible Chain Assembly, Crucible Extension, Crucible Cover, End Alignment Fitting, and Horizontal Packing Clamp.
Q: What is the purpose of the T-Series Horizontal Installation Equipment?
A: The T-Series Horizontal Installation Equipment is designed to simplify the ordering process and splice bars of the same diameter. It includes various components that are long-lasting and can be used interchangeably with other sizes.
Q: What are the rebar sizes supported by the T-Series Horizontal Installation Equipment?
A: The T-Series Horizontal Installation Equipment supports a rebar size of 28 mm (metric), #9 (US), and 30M (Canada).
Introduction
T-Series horizontal installation equipment kits contain the following: Pouring basin frame, crucible frame set (crucible chain assembly, crucible extension, crucible cover), two end alignment fittings and a horizontal packing clamp. Installation equipment kits contain components that are long lasting and often interchangeable with other sizes. Ordering installation equipment kits simplifies ordering, reduces order errors and helps ensure proper sizing of components.
FEATURES
- Simplifies ordering
- Used to splice the same diameter bars
- All components are designed for an extended life
PRODUCT ATTRIBUTES
- Material: Steel;Graphite
- Rebar Size, Metric: 28 mm
- Rebar Size, US: #9
- Rebar Size, Canada: 30M
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed
instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System instruction manual.
Components can also be purchased separately: (1) Pouring Basin Frame, (2)
Crucible Chain Assembly, (3) Crucible Extension, (4)
Crucible Cover, (5) End Alignment Fitting, and (6) Horizontal Packing Clamp.
DIAGRAMS
WARNING
nVent products shall be able to be installed and used as indicated in nVent’s product instruction sheet and training material. Instruction sheets are available at www.nvent.com and from nVent customer service representatives. Faulty installation, misuse, fault use or failure to follow nVents instructions and warnings in their entirety can cause product failure, property damage, serious personal injury and death and/or invalid warranty.
Nord-Amerika
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europa
- Netherlands :
- +31 800-0200135
- France:
- +33 800 901 793
Europa
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>