nVent LENTON RBWS1537M Angular Pouring Basin Top Fill Owner’s Manual
- June 15, 2024
- nVent LENTON
Table of Contents
nVent LENTON RBWS1537M Angular Pouring Basin Top Fill
Top fill pouring basins should be used on angular installations whenever the clearances of the structure allow. The compact size of the top fill pouring basins helps ensure the best possible flow of filler material.
FEATURES
Made from heat-resistant graphite Durable, reusable, and long-lasting Designed for use with T-Series and B-Series horizontal top-fill sleeves
PRODUCT ATTRIBUTES
- Material: Graphite
- Diameter: 95 mm
- Length 1: 162 mm
- Length 2: 14 mm
- Width: 76 mm
- Height 1: 10 mm
- Height 2: 89 mm
- Angle: 45
ADDITIONAL PRODUCT DETAILS
- RBWS1537 pouring basins require one RBM2660 pouring basin frame (sold separately).
- Before installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON
- Cadweld Rebar Splicing System Instruction Manual.
- Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse,
misapplication, or other failure to completely follow nVent’s instructions and
warnings may cause product malfunction, property damage, serious bodily
injury, and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France: +33 800 901 793
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.