AXAGON CRE-SMP2A USB Smart Card SD Cards and SIM PocketReader Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
CRE-SMP2A USB Smart Card SD Cards and SIM PocketReader
Instruction Manual 
INSTRUCTIONS FOR USE
(original)
revision 1.0 CR E-SM P2A
CRE-SMP2A USB Smart Card SD Cards and SIM PocketReader
USB Smart card / ID card & SD / microSD / SIM PocketReader
Instructions for use
- Turn on the computer.
- Connect the reader to the computer USB port.
- An automatic installation will take place. No external drivers are required.
- The Smart Card Reader is ready.
- Insert the Smart/ ID/ memory / SIM Card into the reader.
- Check the successful installation in the Device Manager (Fig. 1).
INFO: To use the reader, it is necessary to install suitable software according to the way the inserted Smart Card is used.
FIGURE 1
Using Device Manager to check correct installation in Windows 10
– only devices added to the Device Manager during card installation are
displayed
SUPPORTED SMART CARDS
CARD WITH A VISIBLE CHIP – SUPPORTED
CARD WITHOUT A VISIBLE CHIP – NOT SUPPORTED
HOW TO USE CARDS & LED INDICATION
TECHNICAL SPECIFICATIONS
INPUT:
- USB 2.0
- USB 1.1
- USB 2.0 CCID protocol
- Built-in USB 2.0 type A male connector
SMART CARD SLOT:
- supports Contact Smart Cards for ATM / CAC / ID I IC / SIS
- Contact Smart Cards ISO 7816, class A, B and C (5V, 3V and 1.8V)
- Standards ISO 7816, EMV 4.1
- Protocols T=0 and T=1, I2C
- SLE 4432/42 (S=10), SLE 4418/28 (5=9)
- PC Smart Card standard PC/SC 2.0
- FIPS 201
- Microsoft Smart Card for Windows
- Microsoft WHQL USB Smart Card Reader
- I2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041
- Smart Card interface speed 420 Kbps (depend on card)
microSD SLOT:
- supports microSDHC I microSDXC I microSD /TransFlash
SD SLOT:
- supports SD / SDHC / SDXC I MMC / RS-MMC / MMC Mobile
FLASH CARD SPECIFICATIONS:
- SD v1.0, v1.1, v2.0, v3.0 (UHS-I)
- SDHC <32GB
- SDXC <2TB
- MMC v3.x, v4.0, v4.1, v4.2
SIM SLOT:
- standard size SIM card (microSlM & nanoSlM with adapter)
- SlMedit SW for edit/backup SIM (available on www.axagon.eu)
OTHER FEATURES:
- Plug and Play
- Hot Plug
- Hot Swap
- USB bus power
- AUTO install
OS SUPPORTED
- Windows: XP /Vista / 7 / 8.1 / 10 / 11 & later
- Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 & later 32 & 64bit versions supported
- Mac OS X 10.x & later
- Linux 2.4.x & later
- Android 8 & later
TECHNICAL SUPPORT:
More information, FAQs, manuals and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing
helped? Write to our technical support: [email protected].
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/cre-smp2a#supportLinkGoal
USB Smart Card reader and memory card reader
© 2022 AXAGON V9robce
Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic
All rights reserved.
All text and pictorial materials contained in this document are protected by
Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice. Made in CHINA for
Axagon.
