SCOSCHE MagicMount Elite2 Magnetic Dash Mount User Manual
- June 13, 2024
- Scosche
Table of Contents
SCOSCHE MagicMount Elite2 Magnetic Dash Mount
INCLUDED ELEMENTS
- A. Magnetic Phone Mount
- B. low-Profile Dash Mount
- C. Optional Mounting Base with Flex Tabs(optimal for mounting to curved surfaces)
- D. Replacement Adhesive
- E. Cleaning Wipe
- F. MagicRing” Adapter
- AdaptateurMagicRing
- G. Mounting Template for MagicRing™
DEVICE SETUP
- SECTION A- iPhone• 12 or later (with or without optional MagSafe? case) iPhone…, 12 ou versions ulterieures
- SECTION B – MagicRing Adapter (for installation on non-MagSaft devices) Adaptateur MagicRing (pour installation sur appareils non compatibles MagSafe”)
- SECTION (- low-Profile Dash Mount
- SECTION D – Optional Mounting Base
- SECTION E-Ad1ustable Ball Joint/ Replacement Adhesive
- SECTION F – Removing Adhesive Mounting Parts
SECTION A
-
A. iPhone 12 or later (with optional MagSafe case) If using a case, it must be a Mag Safe case (not included) for MagicMount Elite2 to function properly.
Note: MagicRing adapter not required -
B. iPhone 12 or later (without case) Note MagicRing Adapter not required iPhone 12 ou versions ulterieures (sans etui) Remarque Adaptateur MagicRing non-requise
SECTION B
MagicRing Adapter (for Installation on Non-MagSafe· Devices*) Use included template to accurately position MagicRing on device Case required. Manufacturing materials do not allow adhesives to bond directly to the device.
SECTION C
low-Profile Dash Mount
Note: Use the included wi e to clean the surface prior to placing the
mount
Remove the backing from the bottom of the mount (A) and place g the mount in
pos1t1on (B). Supplied cleaning wipe may cause discoloration of certain
plastics, 
SECTION D
Optional Mounting Base
Note: Use the included wipe to clean the surface prior to placing the
mount.
Remove the backing from the bottom of the low-profile mount (A) and place the
low-p rofile mount in the mounting base (B) Remove the backing from the bottom
of the mounting base (C) and place the mounting base in position (D) Supplied
ls cl d eanin wipe e may cause discoloration of d certain plastics, viny a
pain nt d surfaces. It s recommended e to the inconspicuous area first
SECTION E
Adjustable Ball Joint
Replacement Adhesive
SECTION F
Removing Adhesive Mounting Parts (Dash Mount & MagicRing) Use a thin plastic
card to carefully lift the dash mount or MagicRing from the mounting surface
Slowly lift up and remove the mount or Mag icRing
MagicMount Elite2
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Phone· 800-363-4490 xl / BOS-486-4450
xl
www.scosche.com
©2023 Scosche Industries
Scosche, Mag,count & MagicRing are all t rademarks of Scosche Industries Other
marks or brands are the property of their respective owners Devices and or
appearance may vary Designed in Oxnard, California
SI MEMSD 4/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>